• Elastomers and Composites
• /
• 제48권1호
• /
• pp.39-45
• /
• 2013

Haake Rheocorder로 각종 과산화물 개시제를 사용하여 ethylene-propylene-diene terpolymer (EPDM)에 단량체 citraconic acid (CCA)을 용융 그라프트 중합을 하여 그라프트 중합물 CCA-g-EPDM을 얻었으며, 이때 효율적인 그라프트 정도와 우수한 성능을 지닌 그라프트 중합물을 얻기 위해서 최적의 반응조건과 최적의 단량체/개시제 농도를 찾는 것은 매우 중요하다. 따라서 본 연구에서는 반응조건과 단량체 및 개시제 함량이 CCA-g-EPDM의 그라프트 정도, 그라프트 효율, 가교정도 (겔화도), 용융흐름지수(MI) 및 기계적 물성 등에 미치는 영향에 초점을 맞추었다. 그라프트 정도와 가교도가 증가함에 따라서 인장강도는 상당히 증가한 반면, 파괴신도 및 MI는 감소하였다. 개시제 중에서 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101)가 가장 우수한 그라프트 정도 (2.31%)를 나타내었으며, CCA와 T-101의 함량이 증가함에 따라 그라프트 정도가 크게 증가하였다. 그리고 그라프트 정도는 반응(혼합)온도 및 반응시간이 증가함에 따라 역시 증가하다가 어느 온도/시간 이상에서는 안정화 혹은 약간 감소하는 경향을 나타내었다. 이러한 영향으로 결과로부터 최적의 단량체/개시제 농도는 5/0.05 wt%이었으며, 최적의 반응온도/시간은 $180^{\circ}C$/15분인 것을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.110-122
• /
• 2012

This study investigated the effects of layered clay on the thermal curing behavior and tensile properties of resole phenol-formaldehyde (PF) resin/clay/cellulose nanocomposites. The thermal curing behavior of the nanocomposite was characterized using conventional differential scanning calorimetry (DSC) and temperature modulated (TMDSC). The addition of clay was found to accelerate resin curing, as measured by peak temperature ($T_p$) and heat of reaction (${\Delta}H$) of the nanocomposite’ curing reaction increasing clay addition decreased $T_p$ with a minimum at 3~5% clay. However, the reversing heat flow and heat capacity showed that the clay addition up to 3% delayed the vitrification process of the resole PF resin in the nanocomposite, indicating an inhibition effect of the clay on curing in the later stages of the reaction. Three different methods were employed to determineactivation energies for the curing reaction of the nanocomposite. Both the Ozawa and Kissinger methods showed the lowest activation energy (E) at 3% clay content. Using the isoconversional method, the activation energy ($E_{\alpha}$) as a function of the degree of conversion was measured and showed that as the degree of cure increased, the $E_{\alpha}$ showed a gradual decrease, and gave the lowest value at 3% nanoclay. The addition of clay improved the tensile strengths of the nanocomposites, although a slight decrease in the elongation at break was observed as the clay content increased. These results demonstrated that the addition of clay to resole PF resins accelerate the curing behavior of the nanocomposites with an optimum level of 3% clay based on the balance between the cure kinetics and tensile properties.

• 한국환경복원기술학회지
• /
• 제8권2호
• /
• pp.1-20
• /
• 2005

The purpose of this paper is to classify two study sites into the biotope types and investigate the landscape ecological characteristics of them. This will be available for the rural planning in the aspect of environmental preservation. The summaries of the result are as follows. 1) In the result of the area assessment in biotope groups, a dry field (32%) and a paddy field (28%) are more than 50%, but settlement space and water space are less than 10%. The result shows the land use condition of rural areas. 2) In the investigation result of elongation, running water spaces are higher than other biotope groups relatively, it is because they long shaped and 1-3m narrow. 3) In case of Fractal index analysis, residential spaces and cultivated lands are investigated to be lower in numerical value, it is because they have the definite borders and get simple in the border of landscape by human intervention. 4) In case of dispersion degree, the dry field has the highest value because they are located close by forests spread widely around study sites. It means that the land which is used by artificial purpose get more value rather than natural lands 5) In the connectivity analysis, a paddy field and a residential space appear the highest. It is because residence spaces spread intensively through roads and a paddy field, through streams. 6) In rural landscape, the diversity of landscape is investigated to be simple. A paddy field and a dry field contain small sized patches that have been divided by human intervention. Besides, there appear much different vegetation around waterways and farm-roads.

• Journal of Acupuncture Research
• /
• 제17권4호
• /
• pp.79-87
• /
• 2000

Objectives : To evaluate the findings useful for differential diagnosis and associated abnormaiities of isthmic spondylolisthesis and degenerative spondylolisthesis on CT. Materials and methods : We reviewed retrospectively the CT images of 65 patients who were diagnosed spondylolisthesis during 3 years period. Our technique was 5mm slices at 5mm intervals with gantry angle to parallel the interspaces. Also reformatted sagittal views were taken. 41 patients were isthmic spondylolisthesis and 24 patients were degenerative spondylolisthesis. Resuits : Isthmic spondylolisthesis. 1. Isthmic type was more common at L5-S1. 2. The degree of anterior displacement was grade I and II. 3. The plane of defect was more horizontal than the usual facet joint. 4. The defect had an irregular shape. 5. Medial aspect of bone just anterior to defect had a small round prominence. 6. Anteroposterior elongation of the spinal canal was common. 7. Pseudobulging disk was common. 8. The most common associated abnormality was a HNP at the upper level of the defect. Degenerative spondylolisthesis. 1. Degenerative type was more common at L4-5. 2. The degree of anterior disptacement was grade I and II. 3. The Plane of facet joint was oriented obliquely instead of horizontally. 4. The posterior facet(inferior facet of superior vertebra) was anteriorly displaced. 5. Bony spur of the posterior portion of anterior facet was seen. 6. The facet joints often contain gas(vaccum phenomenum). 7. The most common associated abnormality was a HNP at the level of the displacement. Conclusions : CT is a highly accurate and most sensitive technique for recognition, differential diagnosis of isthmic and degenerative types and the detection of associated abnormalities.

• 폴리머
• /
• 제32권6호
• /
• pp.587-592
• /
• 2008

고분자량 폴리 (비닐 알코올) (poly(vinyl alcohol), PVA)에 전지빔 (electron beam, EB)을 조사하여 상처치료용 드레싱으로 응용이 기대되는 수화젤을 성공적으로 제조하였다. 다양한 겔화율, 물에서의 팽윤도, 겔강도, 및 신도를 가지는 수화젤을 제조하기 위해 수평균 중합도($P_n$)가 1700과 4000인 두 종류의 PVA를 이용하였으며, PVA 수용액 농도와 EB 조사선량은 5$\sim$20%와 30$\sim$100 kGy의 범위로 각각 조절되었다. 제조된 PVA 수화젤의 겔화율과 겔강도는 PVA의 분자량과 수용액의 농도 및 EB 조사선량이 증가함에 따라 증가하였으나, 반면에, PVA 수화젤의 팽윤도와 신도는 감소하였다. PVA 수화젤의 가교밀도에 따른 열적특성과 결정성의 변화는 differential scanning calorimetry와 X-ray diffraction을 이용하여 분석되었다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.315-322
• /
• 2009

이피디엠/폴리프로필렌 열가소성 경화물을 오일의 배합 순서를 달리한 두 가지 방식(오일 블렌드 후 가교방식과 가교 후 오일 블렌드 방식)으로 제조하여 가교도(겔분율), 경도, 인장강도, 신율, 용융흐름지수 등을 조사, 오일의 블렌드 방식이 열가소성 경화물의 물성에 미치는 영향을 알아보았다. 오일의 블렌드 방식에 따른 두 경화물의 가교도와 기계적 물성의 차는 크지 않았으나, 가공성에 있어서는 가교 후 오일 블렌드 방식으로 제조한 경화물의 용융흐름지수가 현저히 증가한 결과를 보였다.

• 공업화학
• /
• 제7권4호
• /
• pp.691-697
• /
• 1996

천연고무 라텍스(NRL)와 각종 첨가제를 배합 숙성하여 NR 필름을 제조하였고, 클로로프렌고무 라텍스 (CRL)를 일정한 비율로 블렌드하여 NR/CR 필름을 제조하였다. 이들 필름의 전가류 시간에 따른 팽윤도와 기계적 성질의 변화를 측정한 결과, 팽윤도 80~85%, 전가류 시간 48~60hrs등에서 가장 우수하였고, CRL의 블렌드 비율이 증가함에 따라 인장강도는 감소하고 신장율은 증가하는 경향을 나타내었다. 제조공정을 달리하여 제조한 시편의 기계적특성을 비교한 결과, 1회 디핑법을 사용한 NR/CR 필름의 인장강도, 인열강도는 2회 디핑한 NR-d-CR 필름보다 더 우수하였다. 이들 시편의 표면을 SEM으로 관찰한 결과, CRL의 블렌드 비율이 증가할수록 필름 표면의 벌크한 집합체가 증가되는 것으로 보아 상분리가 일어났음을 관찰할 수 있었다.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.274-283
• /
• 2014

Swelling of the heat-treated netting for gillnet was estimated through the netting height in square acrylic tank. Experimental Nylon netting and PBSAT netting were heat-treated by using the high-degree vacuum method in hot water after net making. Heat-treatment temperatures were conducted with Nylon netting $105^{\circ}C$ and PBSAT netting $62^{\circ}C$, $65^{\circ}C$, $66^{\circ}C$, $67^{\circ}C$. The swelling measurement method of a netting using the square tank was capable of the reduction measurement errors comparing with measurement methods of a mesh inner angle and the shortening rate of a mesh size. In addition, this method was available to comparison evaluation for each netting more easily. Wet type heat-treatment apparatus with high-degree vacuum was shown higher $7{\sim}8^{\circ}C$ inner side temperature than a setting temperature. The tensile strength and elongation of Nylon netting and PBSAT netting were shown higher wet condition than dry condition. The tensile strengths of PBSAT monofilaments in dry and wet condition were sharply decreased at heat-treatment temp. $75^{\circ}C$ than heat-treatment temp. $74^{\circ}C$.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.201-210
• /
• 2017

We studied the antibacterial effect and mechanical properties of PLA composites with in organic porous zeolite-type bacteriocides. The specimens were prepared by an intermeshing co-rotating twin screw extruder using different contents of inorganic bacteriocide. The degree of dispersion of the in organic bacteriocide in the PLA composite was confirmed by FE-SEM. The contents of Ag and Zn in the composite were also investigated by energy dispersive spectroscopy at different concentrations of the inorganic bacteriocide. The antibacterial effects were analyzed by turbidity analysis, shaking culture, and drop-test. The mechanical properties, such as the tensile and flexural properties, impact strength, and physical properties, were also investigated. As the content of inorganic bacteriocide increased, the antibacterial activity was increased, especially against Staphylococcus aureus. Mechanical properties, namely, tensile strength, elongation, flexural strength, and impact strength, tended to decrease with an increase in inorganic bacteriocide content, but the tensile and flexural modulus increased.

• 한국포장학회지
• /
• 제5권2호
• /
• pp.1-8
• /
• 1999

The state of compatability of poly(vinyl alcohol)(PVA) and methyl cellulose(MC), prepared by an aqueous solution casting, were investigated over the entire compositions by dynamical mechanical analyzer(DMA) and differential scanning calorimetry(DSC). The glass transition temperatures of the blends, estimated by DMA, indicate that the blends of PVA and MC showed a definite degree of partial miscibility by showing two glass transition temperatures below 80 wt % MC contents in the blends and one glass transition temperature above 80 wt % of MC contents. The DSC results show a depression of melting point and crystallization temperature of PVA in the blends containing more than 80 wt % MC. This indicates that a considerable compatibility in the blend above 80 wt % MC contents may be attribute to the presence of interaction of hydroxyl groups of component polymers through hydrogen bonding. The DMA study of the effect of plasticizer on the polymers showed that water was a good plasticizer for PVA and PEG400 for MC. The addition of water and PEG400 in the blends showed a synergic plasticizing effect on these blends, which resulted in the large extent of the improvement of the compatibility. The elongation of PVA, MC and blonds was found to increase with addition of PEG400 in the blends, but the tensile strength to decrease with addition of plasticizer.