• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1745-1747
• /
• 2016

In this paper, we propose a construction method of irregular quasi-cyclic low-density parity-check codes based on perfect difference families with various block sizes. The proposed codes have advantages in that they support various values with respect to code rate, length, and degree distribution. Also, this construction enables very short lengths which are usually difficult to be achieved by a random construction. We verify via simulations the error-correcting performance of the proposed codes.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.19-26
• /
• 2003

Experimental measurements of flame structure and soot characteristics were performed for ethene inverse diffusion flames (IDF). IDF has been considered as the excellent flow field to study the incipient soot because soot particle do not experience the oxidation process. In this study, LIF image clarified the reaction zone of IDF with OH signal and PAH distribution. laser light scattering technique also identified the being of soot particle. To address the degree of soot maturing, C/H ratio and morphology of soot sample were investigated. From these measurements, the effect of flow residence time and temperature on soot inception could be suggested, and more details on soot characteristic in the IDF was determined according to fuel dilution and flame condition. The fuel dilution results in a decrease of temperature and enhancement of residence time, but the critical dilution mole fraction is existed for temperature not to effect on soot growth. Also, the soot inception evolved on the specific temperature and its morphology are independent of the fuel dilution ratio of fuel.

• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.116-132
• /
• 2001

The world wide web has been growing rapidly. Due to the development, many companies are using the e-commerce through the web as an another tool for the their deal with customers. The internet is utilized as the new distribution business and channel for the most companies. This innovative changes made many people to purchase products through the web. However, there are a lot of problems during the process of supply chain channels. This research is about the impact of service quality on the customer satisfaction in the business-to-consumer(B2C) e-commerce. It was performed by utilizing the methodology for measuring the degree of service quality which has been adopted in the service quality research area. The quality of service is made up of six dimensions(factors): reliability, responsiveness, assurance, empathy, tangible, and convenience. Therefore, we studied the influence of these six factors upon the customer satisfaction, and the results will be summarized.

• Journal of Technology Innovation
• /
• v.6 no.2
• /
• pp.178-207
• /
• 1998

This article suggests a methodology to decide the priority of investment project for venture business under the dynamic circumstance. By the Monte Carlo procedure on the probability distribution of cost and revenue, the model simulates the investment project to estimate profit ratio and risk. The profit ratio is calculated on the yearly basis for the relative comparison. The project risk is calculated as semi-variance under the target yield. After sufficient simulations in this fashion for several projects, the efficient projects with more profit and less risk are selected by the dominance principle. Then the regression equation of the selected projects is produced to find the relative value of the projects. The relative value is obtained through dividing the raw profit ratio by the estimated one on the equation. This value shows the degree to which the simulated project yields over the equation. The priority of investment is decided by this value. An examplary venture business of chemical development for semi-conductor is presented as a case study.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.16 no.1
• /
• pp.51-64
• /
• 2012

This paper provides an efficient dimension reduction algorithm of the positive realization of discrete phase type(DPH) distributions. The relationship between the representation of DPH distributions and the positive realization of the positive system is explained. The dimension of the positive realization of a discrete phase-type realization may be larger than its McMillan degree of probability generating functions. The positive realization with sufficient large dimension bound can be obtained easily but generally, the minimal positive realization problem is not solved yet. We propose an efficient dimension reduction algorithm to make the positive realization with tighter upper bound from a given probability generating functions in terms of convex cone problem and linear programming.

• Language and Information
• /
• v.10 no.2
• /
• pp.1-20
• /
• 2006

This paper is concerned with the distribution and interpretation of yekan and its cognates. Syntactically they require negation, but semantically the sentences in which they occur are positive ones that make monotone increasing inferences possible. This syntax-semantics discrepancy can be best accounted for by showing that yekan and its cousins must be strictly c-commanded by metalinguistic negation at the surface structure and that the positive meaning of the sentences they are part of is derived from the cancellation of the pragmatic upper-bounding implicatum associated with them. These also enable us to explain why they do not occur in the environments where typical NPIs do and why only certain forms of negation license them.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.155-178
• /
• 1996

신호교차로 서비스수준은, 객관적으로 측정 할 수 있는 여러 가지 기준에 의해 결정될 수 있다. 예를 들면, 지체시간(Delay), 교통사고수(Number of Accident), 교통사고율(Accident Rate), 충돌수(Traffic Conflict), 그리고 교통사고에 노출된 차량수(Exposure)등이다. 지금까지는 1985 Highway Capacity Manual(HCM)에서 소개된 지체시간에 의한 서비스수준 결정방법이 널리 사용되어 왔다. 본 논문에서는 1985 HCM 방법의 중용성과 유용성에 대해 논하지 않고, 교통안전(Safety)에 의한 신호교차로 서비스수준 결정방법을 제시하였다. 교차로의 위험도(Degree of Intersection Hazard)를 예측하기 위해, 교통사고빈도 수가 가장 높은 두가지 교통사고 유형, 즉 좌회전추돌(Left-Tum)과 후미추돌(Rear-End) 예측 모형이 개발되었다. 여기서 첫째, 좌회전추돌 위험도를 예측하기 위하여 음지수 분포(Negative-Exponential Distribution)를 이용한 확률적 모형이 개발되었다. 둘째, 후미추돌 위험도를 예측하기 위하여 연속류 모형(Continuum Model)을 이용한 거시적 모형이 개발되었다. 개발된 두가지 모형을 이용하여 신호교차로 안전도를 예측하였으며 교차로 서비스수준이 안전도에 의해 결정되었다. 본 논문에서 제시된 교통안전에 의한 신호교차로 서비스수준 결정방법은 연동교차로를 제외한 독립교차로에만 적용이 된다.

• Transactions of Materials Processing
• /
• v.20 no.6
• /
• pp.456-460
• /
• 2011

A major source of difficulty in die design for high strength steel is the high level of elastic recovery during unloading. The degree of elastic recovery is affected by factors such as material strength, bending angle, punch's corner radius and sheet thickness. Finite Element Method was used in the present work to quantitatively analyze the elastic recovery for various combinations of these parameters. In some cases elastic recovery happened in reverse direction. This phenomenon, which we call spring-go, was explained via changes in stress distribution in the panel occurring in the forming process.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.104-111
• /
• 2001

This study presents an analysis method for heat flow and deformation of sheet metal laser welding. A heat source model for 2-dimensional heat flow analysis of laser welding process was suggested in this paper. To investigate the availability of the heat source model, the analysis results were compared and estimated with the results of previous researches. We could get a good agreement between the results of numerical analysis and experiments in the temperature distribution of weldment. Due to the characteristics of welding process, some kinds of deformations are usually generated in a welded structure. Generally, the degree of deformation is dependent on the welding sequence constraints as well as input power Therefore, in this paper we evaluate the deformation of gas pressure vessel according to the welding sequence and input power. In the analysis of weld deformation, 2-dimensional thermo-elasto-plastic analysis was performed for the gas pressure vessel by using a commercial FE program package.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.139-144
• /
• 1998

In Semi-Solid Forging, it is necessary to control the forming variables accurately in order to make near-net-shape products. Generally, the defects of products may occur due to liquid segregation which can be caused by the degree of deformation and strain rate, and condition of friction in Semi-Solid Forging, where the segregation is to be predicted by flow analysis. This paper presents the feasibility of theoretical analysis model using the new yield function for compressible P/M materials which is proposed by Doraivelu et at. to the flow analysis of the semi-solid dendritic Sn-15％Pb alloys instead of adopting the yield criterion of Shima and Oyane which is used by Charreyron and Flemings. The simple compression process is taken into consideration as the model to confirm the usefulness of the adopted yield function. The distribution of the liquid fraction at various strains and strain rates in radial direction, and the influence of friction are estimated by upper-bound method.