• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.4
• /
• pp.391-397
• /
• 2016

Vibration disturbances induced by the reaction wheels can severely degrade the performance of high precision payloads on board satellites with high pointing stability requirements. The unwanted disturbances produced by the reaction wheels are composed of fundamental harmonic disturbances due to the flywheel imbalance and sub/higher harmonic disturbances due to bearing irregularities, motor imperfections and so on. Because the wheel speed is constantly changed during the operation of a reaction wheel, the vibration disturbance induced by the reaction wheels can magnify the satellite vibration when the rotating frequency of wheel meets the natural frequency of satellite structure. In order to provide an effective isolation of the reaction wheel disturbances, isolation performance of a hybrid vibration isolator is investigated. In this paper, hybrid vibration isolator that combines passive and active components is developed and its hybrid isolation performance using notch filter control is evaluated in single-axis. The hybrid isolation performance using notch filter control show additional performance improvement compared to the results using only passive components.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1023-1030
• /
• 2014

Beam steering algorithms using array antenna are mainly used in such a manner as anti-jamming method. However, the performance is changed according to the position of signals despite the same number of signals and the same received power. In this paper, we analyzed the effect of the position relationship of the signals on the performance of the beam steering algorithms. Therefore, we defined 'signal separation' as the minimum angle of the interference signals and the desired signal, and analysed the relationship between the C/N0 performance of beam steering algorithms as LCMV/PM and the signal separation. For simulation, we set many GPS signals and jamming signals compared to the degrees of freedom. And changed the position and the height of the receiver in order to obtain various signal separation angles. In addition, we examined the effects of signal separation and JSR on the anti-jamming performance by applying the loss factors of the received power. Through the research, there is a tendency that the performance of beam steering algorithms is increased with the increase of the signal separation, and signal separation is more severely affecting on the anti-jamming performance compared to the number of signals and JSR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.401-409
• /
• 2018

This paper presents means of reducing noise in NSD using path control methods for Light Tactical Vehicles (LTV). NSD is applied to the rear axle of LTVs for enhancing mobility. NSD can improve mobility of vehicles with a high locking ratio but causes noise under certain conditions due to its mechanical structure. This noise results from contact between gears due to the differential role of NSD. The noise affects users, so users have continually requested noise reductions. Though the noise doesn't affect product performance and durability, and satisfies the National Defense's noise condition standards, users request for noise reduction is the focus of this research. Eliminating the source of sound for LTVs is realistically limited, so this research applies a path control method to reduce noise by controlling the path which transmits the noise. This study improves the structural delivery system and examines methods of reducing noise in LTV systems.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.230-242
• /
• 2017

A significant rise in product-liability cost is expected due to the newly passed product liability amendment Bill approved during the assembly plenary session on March 30, 2017. Korean government legal service(KGLS) filed a damage suit against Korea aerospace industries, Ltd.(KAI) and Hanwha Techwin Co., Ltd., the manufactures of the KUH-1 Surion helicopter crashed. KGLS alleged claims under the product liability Act, the warrant liability Act and the non-performance of contract act. The accountability limits of military aircraft manufacturers was a highly divisive issue among related scholars and legal practitioners. The bottom line was that military aircraft manufacturers had no product-liability insurance available. The United States courts have, therefore, developed the government contractor defense(GCD) and it was recognized by the U.S. Supreme Court in Boyle v. United Technologies corporation(1988). product liability insurances for military aircraft manufacturers are excessively expensive and it cannot be added onto the military procurement cost accounting. However, having an aircraft accident without one can be ruinously expensive. Therefore, the manufacturers should promptly set up appropriate risk management measures. This thesis will first review the advance GCD theory, and then find a way to either reform government contract related regulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1896-1902
• /
• 2013

As a concept that commercial parts are applied to weapon systems, Commercial Off-The-Shelf(COTS) was not well-received at a time when defense technology led commercial technology. However, the exponential growth of IT and the rapid expansion of commercial industry have made possible to make the cost low through mass production system within a short period, and the benefit of cost and schedule has been highlighted, triggering commercial parts to be applied to weapon systems. In order for commercial technology to be used in defense weapon systems, its performance in an extremely restricted condition of combat environment should be guaranteed. Generally, commercial parts have fundamental limitation in that the design and production requirements for commercial parts are different from those for the military. Therefore, it is required to confirm that commercial parts can be used for weapon systems through the approach of system engineering. This study presents the process tailored to characteristics of marine defense system and the method of analyzing its restricted condition in order to apply COTS to marine defense system. The study classifies the restricted conditions into general and special environments, suggests detailed process, and suggests useful tools to select appropriate items adapted to these restricted conditions in the commercial market. Lastly, as a case study for COTS applied to marine defense system, the study finds out the analysis results of application of COTS and restricted conditions of the warship electric system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.50-61
• /
• 2018

A precedent defense project study was carried out in the early stage of the project to support efficient determination of the acquisition method of the determined weapons system. A precedent study in the early stage of the project has been neglected, but lack of performance and increased costs are continuing problems. In a precedent study on a number of items within a limited time frame, expected risks during project implementation were not identified and reduced by failing to review the key review element in depth. Therefore, in this paper, we studied the application of the FTA/FMEA technique used in the system safety analysis process to identify key factors to be considered when carrying out the defense research project. The methodology for the development of the key review items was established through the improvement of the FTA/FMEA technique in order to meet specific conditions and given conditions. Based on the results of this study, we redefined core key factors in the precedent study stage, thereby eliminating unnecessary and anticipated risks that may arise in the future project management aspects of the defense project. It is anticipated that this will reduce costs and time in terms of the lifecycle of the weapon system and promote stable operation of the project through reduction of risk.

• The Journal of Korean society of community based occupational therapy
• /
• v.5 no.2
• /
• pp.1-9
• /
• 2015

Objective : This study is to investigate the correlation of Ego-degense mechanism, stress and activities of daily living of stroke patients. Methods : The study was carried out from March 14, 2014 to May 15, 2015. A survey was conducted at a university hospital and three rehabilitation hospitals located in Daegu and Busan. For statistical analysis, frequency analysis, independent sample t-test, and Pearson correlation coefficient were used in this study. Results : As a result of the mature Ego-defense mechanism grop was more stressful than immature Ego-defense mechanism group(p<.05), mechanism group also showed better performance in activities of daily living activity(p<.05). Conclusion : The higher stress in stroke patients related to the disability to perform activities of daily living. Psychosocial rehabilitation for factors such as stress as well as physical function in stroke patients in the rehabilitation of stroke patients by using the Ego-defense will have a significant impact on an individual's personality or lifestyle.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.5
• /
• pp.101-106
• /
• 2020

Since computer became available, much effort has been made to achieve information security. Even though memory protection defense mechanisms were studied the most among of them, the problems of existing memory protection defense mechanisms were found due to improved performance of computer and new defense mechanisms were needed due to the advent of the side-channel attacks. In this paper, we propose JMP+RAND that embedding random values of 5 to 8 bytes per page to defend against memory sharing based side-channel attacks and bridging the gap of existing memory protection defense mechanism. Unlike the defense mechanism of the existing side-channel attacks, JMP+RAND uses static binary rewriting and continuous jmp instruction and random values to defend against the side-channel attacks in advance. We numerically calculated the time it takes for a memory sharing-based side-channel attack to binary adopted JMP+RAND technique and verified that the attacks are impossible in a realistic time. Modern architectures have very low overhead for JMP+RAND because of the very fast and accurate branching of jmp instruction using branch prediction. Since random value can be embedded only in specific programs using JMP+RAND, it is expected to be highly efficient when used with memory deduplication technique, especially in a cloud computing environment.

• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.3
• /
• pp.8-17
• /
• 2023

The current weapon system is operated as a complex weapon system with various standards and protocols applied, so there is a risk of failure in smooth information exchange during combined and joint operations on the battlefield. The interoperability of weapon systems to carry out precise strikes on key targets through rapid situational judgment between weapon systems is a key element in the conduct of war. Since the Korean military went into service, there has been a need to change the configuration and improve performance of a large number of software and hardware, but there is no verification system for the impact on interoperability, and there are no related test tools and facilities. In addition, during combined and joint training, errors frequently occur during use after arbitrarily changing the detailed operation method and software of the weapon/power support system. Therefore, periodic verification of interoperability between weapon systems is necessary. To solve this problem, rather than having people schedule an evaluation period and conduct the evaluation once, AI should continuously evaluate the interoperability between weapons and power support systems 24 hours a day to advance warfighting capabilities. To solve these problems, To this end, preliminary research was conducted to improve defense interoperability capabilities by applying natural language processing techniques (①Word2Vec model, ②FastText model, ③Swivel model) (using published algorithms and source code). Based on the results of this experiment, we would like to present a methodology (automated evaluation of interoperability requirements evaluation / level measurement through natural language processing model) to implement an automated defense interoperability evaluation tool without relying on humans.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.263-266
• /
• 2000

An elliptical ogive head for a generic missile is proposed to reduce its detectable probability from a ground defense radar. Numerical RCS results of a generic missile with an elliptical ogive head are evaluated using the GTD/UTD (Geometrical Theory of Diffraction/Uniform GTD). The results are compared with those of a cylindrical ogive head. In the sense of aerodynamics, the Performance evaluation of an elliptical ogive head for a generic missile should be followed.