• 제목/요약/키워드: defect inspection

검색결과 596건 처리시간 0.027초

AHP 기법에 의한 농업용 저수지의 상태평가 기준 설정 (Establishment of Condition Assessment Criteria in Agricultural Reservoirs by AHP)

  • 심재웅;이영학;이달원
    • 한국농공학회논문집
    • /
    • 제64권5호
    • /
    • pp.17-26
    • /
    • 2022
  • In this study, in order to establish the criteria for evaluation of importance by the type of facility specialized for agricultural reservoirs, an expert group consisting of a total of 167 members who were in management, or specialized in the fields of design, research, and diagnosis were organized, and the importance for facilities was set with application of the AHP technique. The importance of dam body, spillway, and intake structure composing a reservoir were set at 59%, 24%, and 17%, and the importance of dam crest, upstream slope, and downstream slope constituting a dam body was set at 32%, 31%, and 37%, respectively. In addition, the importance of approach channel, regulated channel, chute channel, and stilling basin consisting a spillway was set at 15%, 44%, 26%, and 15%, and the importance of inclined conduit and outlet conduit consisting an intake structure was set at 35% and 65%, respectively. The safety grade of the reservoirs evaluated by applying the newly presented importance values in this study showed the rearrangement of the grades with a change of 11% compared to the previous grades. In this way, the newly established criteria are expected to be utilized as basic data with strategic importance in reservoir safety management and disaster prevention as well as the operation of systems in the future.

Scanning acoustic microscopy for material evaluation

  • Hyunung Yu
    • Applied Microscopy
    • /
    • 제50권
    • /
    • pp.25.1-25.11
    • /
    • 2020
  • Scanning acoustic microscopy (SAM) or Acoustic Micro Imaging (AMI) is a powerful, non-destructive technique that can detect hidden defects in elastic and biological samples as well as non-transparent hard materials. By monitoring the internal features of a sample in three-dimensional integration, this technique can efficiently find physical defects such as cracks, voids, and delamination with high sensitivity. In recent years, advanced techniques such as ultrasound impedance microscopy, ultrasound speed microscopy, and scanning acoustic gigahertz microscopy have been developed for applications in industries and in the medical field to provide additional information on the internal stress, viscoelastic, and anisotropic, or nonlinear properties. X-ray, magnetic resonance, and infrared techniques are the other competitive and widely used methods. However, they have their own advantages and limitations owing to their inherent properties such as different light sources and sensors. This paper provides an overview of the principle of SAM and presents a few results to demonstrate the applications of modern acoustic imaging technology. A variety of inspection modes, such as vertical, horizontal, and diagonal cross-sections have been presented by employing the focus pathway and image reconstruction algorithm. Images have been reconstructed from the reflected echoes resulting from the change in the acoustic impedance at the interface of the material layers or defects. The results described in this paper indicate that the novel acoustic technology can expand the scope of SAM as a versatile diagnostic tool requiring less time and having a high efficiency.

전기 자동차 부스바 인서트 사출 자동화 시스템 개발 (Development of a injection molding automation system of busbar insert for the electric vehicle)

  • 김종수
    • Design & Manufacturing
    • /
    • 제18권2호
    • /
    • pp.35-40
    • /
    • 2024
  • Injection molding is a process widely used across various industries for molding plastics, and it is the most commonly applied process in root industries utilizing molds. Among the different types of injection molding, insert injection molding, where busbars are used as inserts, is increasingly being applied in the electric vehicle industry. However, currently, the insert injection molding process is manually performed, with workers placing insert components by hand before injection molding. This results in issues related to productivity, safety, and quality. Additionally, there is a growing demand for automation of such production lines due to hazardous working conditions, economic difficulties in the manufacturing industry, and the decline in the labor force caused by an aging population. This study focuses on the application of an automated system for the insert injection molding process used in electric vehicles. The development of an automated system for the transport and insertion of insert components, as well as the inspection and stacking processes after injection, has resulted in over a 25% improvement in productivity and more than a 27% reduction in defect rates.

항만하역관할의 원인분석 및 예방대책에 관하여 (On the Countermeasure for Preventing the Accident of Cargo Handling in Port)

  • 박용욱;이철영
    • 한국항해학회지
    • /
    • 제17권3호
    • /
    • pp.57-68
    • /
    • 1993
  • The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.

  • PDF

누설자속기법을 이용한 강봉의 손상 정량화 기법 (Magnetic Flux Leakage based Damage Quantification of Steel Bar)

  • 박주영;김주원;유병준;박승희
    • 한국전산구조공학회논문집
    • /
    • 제30권1호
    • /
    • pp.63-70
    • /
    • 2017
  • 본 논문에서는 와이어로프 손상의 정량화를 위하여 먼저 동일한 소재 및 직경을 가지는 강봉을 이용한 누설자속기반 결함탐상 연구를 진행하였다. 현재까지 국외 및 국내에서 누설자속탐상 기법을 이용하여 결함을 탐상하는 연구가 많이 진행되어 왔지만, 그 손상을 진단하는 것에 그쳐 손상의 정도를 판별하여 그에 따른 적절한 조치를 취하는 것에 어려움이 있다. 따라서 본 논문에서는 전자기적 유한요소 해석 프로그램을 이용하여 누설자속탐상 시스템을 모델링하였으며 강봉을 강자성체 시편으로 이용하여 누설자속탐상 시뮬레이션을 진행하였다. 또한 시뮬레이션 결과를 검증하기 위하여 실제 강봉에 시뮬레이션과 동일한 종류의 손상을 가공하여 결함탐상 실험을 진행하였다. 시뮬레이션과 실험 데이터를 분석한 결과 탐상 속도는 신호의 크기에 미소한 영향을 주었으며, 손상의 너비 변화에 따라 신호의 크기가 동일하지 않음을 검증할 수 있었다. 본 분석을 토대로 깊이 손상과 너비 손상에서의 신호 특성을 추출하여 손상의 종류를 분별할 수 있었고, 역으로 추출된 신호의 특성을 이용하여 손상의 종류를 판별할 수 있는 가능성을 확인하였다.

군용항공기 열교환기 윤활유 유입포트 균열개선 연구 (The quality improvement study on the crack of heat exchanger lubricating oil port in military aircraft)

  • 박성제;최재호;최길규;이동기
    • 한국산학기술학회논문지
    • /
    • 제21권4호
    • /
    • pp.164-172
    • /
    • 2020
  • 군용항공기에 장착되는 연료/오일 열교환기는 연료의 저온을 이용하여 항공기 탑재부품 구동장치나 유압펌프와 같은 다른 장치에 공급되는 윤활유를 냉각시키는 장치로 항공기 탑재부품 구동장치로 연결되는 윤활유 유입포트에 균열이 발생되었다. 만일 열교환기의 균열이 발생될 경우 다른 장치에 공급되는 윤활유 냉각이 이루어지지 않아 더 이상 비행을 할 수 없기 때문에 해당 결함은 항공기 가동률 저하에 큰 원인이 된다. 본 연구에서는 군용항공기 연료/오일 열교환기 항공기 탑재부품 구동장치 오일포트 균열 현상을 개선하기 위해 오일 포트 균열부위 파단면에 대한 비파괴 검사와 현미경 검사를 수행하여 균열에 대한 경향성을 분석하였으며, 열교환기 오일포트에 연결되는 오일 배관은 티타늄 재질의 배관으로 열교환기에 장착 시 과도한 토크로 체결되어 열교환기 균열의 주된 원인으로 확인되어 유한구조해석을 통해 장착 토크 적용 시 열교환기에 과도한 힘이 전달되는 것을 검증하였다. 해당 결함에 대한 개선 방안으로는 항공기 탑재부품 구동장치 오일 포트에 장착되는 배관의 재질과 직경을 변경시켜 적용 토크 값을 열교환기 오일 포트에서 견딜 수 있는 값으로 조정하였으며, 또한 맥동압력으로 인한 피로누적을 최소화시키기 위해 배관의 굽힘값을 조정하였다. 결과적으로, 동일한 조건에서 개선된 배관을 장착하여 지상시험을 통해 열교환기에 균열이 발생되지 않는 것을 확인할 수 있었다.

Moire' 영상무늬를 통한 근골격계질환의 진단과 현가장치를 이용한 치료방안 (Diagnosis of Work-related Musculoskeletal Disease through Moire Image Pattern and Treatment Measure using a Sling System)

  • 이상용;이은경;권소희;정혜경;김삼태;정명수;이기남
    • 대한예방한의학회지
    • /
    • 제7권2호
    • /
    • pp.121-130
    • /
    • 2003
  • The Musculoskeletal Disease has been ignored or turned away due to the difficulty of diagnosis and the vagueness of judgement up to now. Contrary to other diseases, there were many cases where the character of the Musculoskeletal Disease wasn't revealed through the objective inspection. And that's because the Musculoskeletal Disease appears for the most part due to muscular defect so it is impossible to diagnose the muscle by X-ray diagnosing the bone and it is also impossible to diagnose the fine damage of the muscle or tendon even by advanced device like MRI. As the nervous blood vessels or acupunctures pass through or are next to the muscle, the tension of the muscle put pressure on these so can become the direct or indirect causes of various kinds of pains or intern diseases. But in spite of that, for lack of proper equipment diagnosing the state of the muscle(Shortened.. Relaxed... or Hardened...) the muscle has been disregarded or neglected intentionally or unintentionally. While many people think themselves to be a muscular expert, if they don't see the shape of the muscle, that is just like blind treatment. But as now the equipment diagnosing the state of the muscle is developed, it seems that this problem can be settled. It was attempted in this study that the muscle or skeleton of the Musculoskeletal disease patients was diagno the treatment order and method were decided by a questionnaire survey and simple inspection, and the Musculoskeletal correction exercise using the muscle management and sling system made them escape from the Musculoskeletal disease, turning their muscle into more flexible and stronger muscle. As a result notwithstanding the limited treatment period '12 times', the improvement rate was as high as 74%, which showed that the muscle management and Musculoskeletal correction exercise had a great effect on the symptom improvement of the patients. If the treatment times had increased, the improvement rate also would have increased more.

  • PDF

스테인리스 전기로 산화슬래그의 콘크리트용 잔골재 활용방안 검토 (Study on Stable Use of Stainless EAF Oxidizing Slag as Fine Aggregate of Concrete)

  • 조봉석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권3호
    • /
    • pp.133-142
    • /
    • 2014
  • 최근 골재 수급불균형 문제 및 천연자원 고갈에 관한 사회적 관심이 집중되는 가운데, 종래 철강공정에서 부산물로 발생하는 슬래그 중 전기로 산화슬래그는 그 물리적 특성이 일반 골재와 유사한 특성이 있어 콘크리트용 골재로서 활용가능성이 높게 평가되나 슬래그 중 함유되어 있는 free-CaO에 의한 표면결함을 야기하는 문제를 내재하고 있다. 본 연구는 이러한 전기로 산화슬래그 골재의 화학적 안정성 확보 방안을 도출하고 이를 통해 안정화된 슬래그 골재를 용도별 콘크리트용 잔골재로 활용하여 콘크리트의 역학적 성능 및 내구성능을 실험적으로 평가함으로서 최종적으로 전기로 산화슬래그 잔골재의 활용방안을 제시하는 데 그 목적이 있다. 본 연구결과, 전기로 산화슬래그의 골재입경 조정, 소정 기간 동안의 자연 에이징 처리에 의해 팝아웃 등의 표면결함을 대폭 저감할 수 있는 것으로 나타났으며, 콘크리트 용도별 대체율에 따른 역학적 성능 및 내구성능은 일반 골재와 비교하여 동등 또는 동등 이상의 성능을 발현하는 것으로 평가되었다. 향후 전기로 산화슬래그 잔골재 활용시에는 콘크리트의 미관저해 현상이 나타나지 않도록 충분한 사전 에이징 또는, 가공처리 등 안정성 확보를 위한 품질관리가 선행되어야 할 것이다. 또한, 철강부산물의 친환경적인 자원순환 시스템을 확립하기 위해서는 전기로 산화슬래그 골재에 대한 품질관리방안 확립과 더불어 다양한 용도개발이 이루어져야 하며 각종 공학적 특성 및 내구성에 관한 지속적인 연구개발이 이루어져야 할 것이다.

Flexible ECA Probe를 이용한 평판 및 용접부 검사 (Inspection of Welded Zone and Flat Plate Using Flexible ECA Probe)

  • 이창준;이규성;신충호;이경준;장윤영
    • 비파괴검사학회지
    • /
    • 제36권4호
    • /
    • pp.288-294
    • /
    • 2016
  • Flexible ECT (eddy current array) probe를 사용하여 판재 및 용접부에 존재하는 notch 결함을 MS-5800E와 OmniScan MX 장비로 검출능력을 비교하고, 주파수와 lift-off를 변수로 신호의 특성을 비교하고자 하였다. 실험 결과, 500, 1000, 1500 kHz를 사용하였을 때 notch 깊이가 증가할수록 신호의 진폭이 증가하는 것으로 나타났고, lift-off 변화에 따른 신호의 진폭은 선형적으로 감소하였다. 또한 용접부 결함은 probe와 시험체의 접촉면에 밀접한 관계가 있다. Probe와 시험체의 접촉면이 양호한 경우 검출감도가 우수하고 그렇지 않은 경우에는 검출감도가 떨어지는 것을 알 수 있었다.

3D-IC 반도체 모듈의 내부결함 검사를 위한 초분광 영상기반 검출모듈 개발 (Development of hyperspectral image-based detection module for internal defect inspection of 3D-IC semiconductor module)

  • 홍석주;이아영;김기석
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2017년도 춘계공동학술대회
    • /
    • pp.146-146
    • /
    • 2017
  • 현대의 스마트폰 및 태블릿pc등을 가능하게 만든 집적 기술 중의 하나는 3차원 집적 회로(3D-IC)와 같은 패키징 기술이다. 이러한 첨단 3차원 집적 기술은 메모리집적을 통한 대용량 메모리 모듈 개발뿐만 아니라, 메모리와 프로세서의 집적, high-end FPGA, Back side imaging (BSI) 센서 모듈, MEMS 센서와 ASIC 집적, High Bright (HB) LED 모듈 등에 적용되고 있다. 3D-IC의 3차원 모듈 제작 시에는 기존에 발생하지 않았던 여러 가지 파괴 모드들이 발생하고 있는데 Thermal/Photonic Emission 장비 등 기존의 2차원 결함분리 (Fault Isolation) 기술로는 첨단의 3차원 적층 제품들에서 발생하는 불량을 비파괴적으로 혹은 3차원적으로 분리하는 것이 불가능하므로, 비파괴 3차원 결함 분리 기술은 향후 선행 제품 적기 개발에 매우 필수적인 기술이다. 본 연구는 3D-IC 반도체의 비파괴적 내부결함 검사를 위하여 가시광선-근적외선 대역(351nm~1770nm)의 InGaAs (Indium Galium Arsenide) 계열 영상검출기 (imaging detector)를 사용하여 분광 시스템 광학 설계를 통한 초분광 영상 기반 검출 모듈을 제작하였다. 제작된 초분광 영상 기반 검출 모듈을 이용하여 구리 회로 위에 실리콘 웨이퍼가 3단 적층 된 반도체 더미 샘플의 초분광 영상을 촬영하였으며, 촬영된 초분광 영상에 대하여 Chemometrics model 기반의 분석기술을 적용하여 실리콘 웨이퍼 내부의 집적 구조에 대한 검사가 가능함을 확인하였다.

  • PDF