• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.171-174
• /
• 1997

The great development of semiconductor industry demands the high efficiency and performance of related device, but the pick and place system of semiconductor packaging device can load a few units until nowdays. Although the system can load a lot of units, it can work multiple sort operation. The defect like that causes a low efficiency. Therefore, this paper represents the development of pick and place system which can work multiple sort operation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.87-88
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.343-344
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.242-246
• /
• 1996

Accurate measurements of burr profile and burr size are very important for the automation of deburring. In this paper, a new burr measurement system using capacitance sensor is proposed. Ultra precision milling machine was used as a sensor positioning system. The possibility and limitation of employing a capacitance sensor to defect burrs are also investigated. The proposed system is proven to be relatively accurate, easy to setup and lower cost. This system will be applicable to a fully automated deburring system with minor modifications.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1130-1135
• /
• 2001

This paper investigated the dynamic performance of HDD disk-spindle system to reduce disk fluttering. Rocking frequencies of the disk-spindle system and radial NRRO are measured to escape the ball defect frequencies and to determine the relative optimal position of the disk in the motor. It was found that disk fluttering was reduced by increasing disk thickness, inserting viscoelastic material between the disk and the spacer and decreasing the gap between the disk and the base.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.363.1-363
• /
• 2002

This paper presents that the Wavelet Transform can be used to detect the various local defects in a gearbox. Two types of defects which are broken tooth and localized wear, are experimented and the signals are collected by accerometer and acoustic sensors and analyized. Because of the complecity of the signals acquired form sensors, it is needed to identify the interesting signal. (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.240-244
• /
• 1992

A new method for generation of binary random sequences, called random sampling method, has been proposed by the authors. However, the random sampling method has the defect that binary random sequence can not be rapidly generated. In this paper, two methods based on the random sampling method are proposed for fast generation of binary random sequences. The optimum conditions for obtaining ideal binary random sequences are derived.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.796-800
• /
• 1994

결함검사에 영상처리기술을 적용할때, 데이타량 때문에 많은 처리시간과 판정의 오류들이 발생할수 있다. 본 연구에서는 검사를 해야할 화상을 푸리에 변환과 특징 값 추출을 통해서 판정의 오류를 줄이고 처리해야할 데이타량을 줄일 수 있음을 보여준다. 검사 알고리즘은 두단계의 비교과정을 거치면서 설정된 기준치를 넘는 경우가 생기면 결함으로 판단을 하는 단순한 튿정값의 비교에 의해서 수행이 될 수 있음을 보여준다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.204-204
• /
• 2004

현재 정보통신의 강국으로 손꼽히고 있는 국내에서도 FPD(Flat Panel Display) 장치를 첨단산업 핵심 기술로 보고 기업 간에 치열한 기술경쟁을 벌이고 있는 실정이다. 현재 양산단계까지 접어든 TFT-LCD(Tin Film Transistor Liquid Crystal Display)와 PDP(Plasma Display Panel)는 경량화, 박형화 등의 장점으로 전자업계에서 최고의 캐시카우(Cash Cow)로 부각되고 있으며, 특히 소비자들의 대화면 선호도의 증가 추세에 힘입어 LCD보다는 콘트라스트 비(Contrast Ratio)와 시야각(View Angle) 측면에 있어 FPD 장치의 대면적화 관점에서 유리한 PDP가 다소 우위를 보이고 있는 추세이다.(중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.183-184
• /
• 2012

플라즈마 처리에 따른 그래핀의 결함발생 연구에 대해 보고한다. 본 연구에 적용된 그래핀은 그라파이트에서 박리된 그래핀 (Exfoliated graphene: EG)과 CVD 방법으로 합성된 그래핀(CVD-G)이다. 본 연구에서는 플라즈마에 처리조건에 따른 CVD-G와 EG 간의 차이점에 대해 실험적 분석 및 이론적 해석을 수행하였다.