• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.458-463
• /
• 2008

This study focused on the suggestion that is improved alternation with relation to construction item & assurance term in order to deal with the assurance conflict efficiently which have been happened in the apartment housing. To correspond to this purpose of research, as a first step, we introduced the add item & sub item of construction work on the basis upon construction specifications of the number of 17 on housing law as a alternation of the defects assurance construction item that is necessary to correct as soon as possible. As a second step of the research, we did cross analysis & compare the result of defects happened to the apartment housing complex of 293 with the defect' rate of construction work excepted from the supervisory item, and main performance estimation items in the HPGS(House Performance Grading System), and analysis results introduced from question survey. As the result of this research work, we became to reflect the improving schemes on the housing Law the year of 2007.

• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.605-614
• /
• 2006

The success of a software development project can be determined by the use of QCD. And as a software's size and complexity increase, the importance of early quality assurance rises. Therefore, more effort should be given to prevention, as opposed to correction. In order to provide a framework for the prevention of defects, defect detection activities such as peer review and testing, along with analysis of previous defects, is required. This entails a systematization and use of quality data from previous development efforts. FMEA, which is utilized for system safety assurance, can be applied as a means of software defect prevention. SW-FMEA (Software Failure Mode Effect Analysis) attempts to prevent defects by predicting likely defects. Presently, it has been applied to requirement analysis and design. SW-FMEA utilizes measured data from development activities, and can be used for defect prevention on both the development and management sides, for example, in planning, analysis, design, peer reviews, testing, risk management, and so forth. This research discusses about related methodology and proposes defect prevention model based on SW-FMEA. Proposed model is extended SW-FMEA that focuses on system analysis and design. The model not only supports verification and validation effectively, but is useful for reducing defect detection.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.99-107
• /
• 2008

Product liability(PL) is the producer's compensation to customers for damage incurred by product defects. This paper studies on the organizational culture, promotion process, system construction, system level, product safety review, product safety assurance, system operation, and its effectiveness and necessity of recognition for the PL system of small and medium-sized firms in Gangwon-Do province. The results show that the firms have product safety regulations, but the number of firms which its employees understand the regulations is less than the number of firms which do not understand. Also the number of firms which is preparing PL prevention and insurance, and counterplan for accidents seems to be not in large numbers.

• Journal of Korean Society for Quality Management
• /
• v.45 no.3
• /
• pp.349-364
• /
• 2017

Purpose: The purpose of this study is to analyze quality control strengthening pilot project in development stages of weapon systems which ensures zero-defect. In order to achieve that, we propose collaboration support system between related organizations. Methods: First, we analyze how quality control methods has been developed from reviewing the preliminary study in commercial and defense industry. Then, we suggest improvement plans for quality control in defense industry and propose a pilot study which able to improve the recognized problems. Results: The results of this study ensures the participants in defense industry recognize the importance of quality control and form a consensus by sharing a case study. Finally, we propose the standardized work process by utilizing manual and manpower dispatching. Conclusion: As a result, this study clarifies the scope and role of relevant organizations to achieve the defense quality assurance in the total life cycle(TLC). Also, this paper guides the collaboration system between the relevant organization which differs from the commercial industry currently divided into development-production-quality.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.112-116
• /
• 2007

If any of the set parameters such as the environment temperature, mold temperature are not maintained at a consistent level, the fail rate of injection molding products is increased. The price of the injection molding machine is very high, so in order to maximize the utilization of the machine that is required the production of a number of different products with minimum fail rate using a single machine. To prevent the defect products by an inspection process with perfect quality is very important to minimizing production of defect products in the molding process. Vision inspection systems are widely utilized in various manufacturing industries for quality assurance purposes. The vision inspection system consists of CCD camera and lighting system to capture the image of the subject of inspection, an image comparison algorithm using to determine the pass/fail of the products, and mechanical devices for the operation of the whole system. This research focuses on the development of the vision inspection system to process the inspection of an automobile parts. We developed a mechanical devices for the inspection of the injection molding products and an image comparison algorithm to determine the pass/fail result of the inspection based on the molding image and the accepted product image.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.687-695
• /
• 2011

The defect caused by the software industry that is the source of knowledge-centric, information-centric and technology-centric affects an engine which operate a major role for operation of aircraft. Therefore, we should minimize the danger from the defect by strengthening the stability of aviation through the stability analysis of software. In this paper, we examine the laws and systems about the aircraft defects and software safety and propose the enhancement and the enactment of the law or measures to strengthen aviation safety. We should the existing law or system as items, such as the revision related to the safety analysis, standards of quality assurance including safety, application of quality assurance that you must attach the safety analysis report, assessment of detailed instructions of certification authorities. In addition, we should enact the new law and system as items such as the mandatory software evaluation and certification, continuous assessment based on the software life cycle, mandatory introduction of a standardized development methodology, strengthening of advanced workforce system. We can expect the improvement of software quality and an enhanced aviation safety by improving existing laws or systems and enacting new laws or systems.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.321-326
• /
• 2008

The software defects that are not found in the course of a project frequently appear during the conduct of the maintenance procedure after the complete development of the software. As the frequency of surfacing of defects during the maintenance procedure increases, the cost likewise increases, and the quality and customer reliability decreases. The defect rate will go down only if cause analysis and process improvement are constantly performed. This study embodies the defect tracking system (DTS) by considering the Pareto principle: that most defects are repetitions of defects that have previously occurred. Based on the records of previously occurring defects found during the conduct of a maintenance procedure, DTS tracks the causes of the software defects and provides the developer, operator, and maintenance engineer with the basic data for the improvement of the software concerned so that the defect will no longer be manifested or repeated. The basic function of DTS is to analyze the defect type, provide the measurement index for it, and aggregate the program defect type. Doing these will pave the way for the full correction of all the defects of a software as it will enable the defect correction team to check the measured defect type. When DTS was applied in the software configuration management system of the W company, around 65% of all its software defects were corrected.

• Journal of the Korean Society of Systems Engineering
• /
• v.8 no.2
• /
• pp.19-25
• /
• 2012

As modern weapon systems have evolved into embedded software systems, the capability to develop, install, and maintain high-quality software products is becoming increasingly valuable in today's competitive aerospace and defense industry. It is desirable, especially for government-contracted projects whose end-users are military personnel, that specific types of software quality elements are assured early during product development; namely, functionality and usability. Motivated by this need to approach improving software quality from a user's perspective, this paper presents a case study that analyzes system-level software integration testing results for a weapon system indigenously developed in the Republic of Korea. Quantitative data, such as software defect ratios and configuration change rates, are computed to observe meaningful trends with respect to functionality - represented by tests designed to verify the system's electrical signal interfaces - and usability, which is evaluated in terms of how often the initial human-computer interface had to be re-designed. Insights gained from these exercises are subsequently presented as a set of "lessons learned" to take into account when developing new software items for complex weapon systems.

• Agricultural and Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2003

Internal defects such as browning of the flesh and blackening and rot of the ovary of pear can be easily developed because of the inadequate environmental conditions during the storage and distribution of fruit. The quality assurance system for the agricultural product is to be settled in Korea. All defected agricultural products should be excluded prior to the distribution to enhance the commercial values. However, early stage on-line defect detection of agricultural product is very difficult and even more difficult in a case of the internal defects. The goal of this research is to develop a system that can detect and classify internal defects of agricultural produce on-line using VIS/NIR transmittance spectroscopy. And Shingo pear, which is one of the famous species of Korean pear, was used for the experiment. Soft independence modeling of class analogy (SIMCA) algorithm was employed to analyze the transmittance spectroscopic data qualitatively. On-line classification system was constructed and classification model was developed and validated. As a result, the correct classification rate (CCR) using the developed classification model was 96.1 ％.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.841-848
• /
• 1999

In the quality assurance check process of DC motor systems, even though the overall sound pressure level is acceptable, there is an incident that subjective evaluation leads to failure in product quality due to annoying noise. This kind of problem may be originated from the manufacturing or assembly process. In this paper, the transient spectral analysis, or the time-frequency analysis is applied to the noise quality problem. For the case study, the cause of annoying noise in the wind shield wiper motor is experimentally analyzed in detail. It is concluded that the defect in the shaft causes the impact noise which is not detectable by steady spectral analysis. Also demonstrated is how the time-frequency analysis is effectively applied to the annoying noise identification of the rotor-gear system.