• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2001

Even though there is a guideline for the required strength of pipe support in inspection, it does not mean the nominal strength which can be used for the form work design. And, Concrete Specification defines that the pipe support should be designed according to the steel design guidelines but the design details are not provided, such as buckling length and the sectional modulus, etc. For the better prediction of strength of pipe support, the slenderness ratio of support which reflects the boundary condition should be considered. In this paper, the elastic buckling formula based on the slenderness is derived. The formula contains the strength reduction factor that consider the strength deduction caused by initial lateral deformation and is 0.65 consistently regardless of boundary conditions. And the coefficient of effective buckling length is calculated from the experiment.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2007.05a
• /
• pp.149-152
• /
• 2007

본 연구는 광범위한 공간에서(공공장소에서) 불특정 사용자를 대상으로 가능한 정보수집 방법을 제시하고, 수집된 정보의 활용 방안을 제안하기 위해 진행되었다. 연구 내용은 첫번째, 서비스 환경 변화로 인해 공공 디스플레이 서비스 개발요소 도출을 위해 연구사례 및 문헌을 통해 공공장소에서 활용 가능한 사용자 정보수집 기법을 선정하고 고찰한다. 두번째, 선정된 기법을 서비스 개발에 적용하기 위한 정보 수집시 고려해야 하는 특성 및 속성 변수를 정의하고, 이를 중심으로 공공디스플레이 서비스 개발을 위한 사용자 정보 수집 방법을 제안 하였다. 네번째 제안된 방법을 활용하여 서비스 내용과 방법(제공/조작방식).

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.136-140
• /
• 2017

The physical tool for analyzing collision accidents narrows down to the conservation law of momentum. The conservation law of momentum which is also utilized to investigate or to analyze a traffic accident is essential to Newton mechanics. This paper suggests an alternative analytical tool based on the conservation law of momentum. Simply put, the tool is a alternative qualitative method of analyzing a car's direction to find out whether it is driving over the centerline This paper proposes a deduction theory that use qualitative information to make a qualitative analysis of which car drove over the center line.

• Journal of Korean Medical classics
• /
• v.31 no.1
• /
• pp.95-112
• /
• 2018

Objectives : This paper tried to explain the meaning of Shaoyangzhugu in Huangdineijing. Methods : The opinions on these matters that can be found in the past studies are analyzed to assess the strengths and limitations of today's explanations on the meaning of Shaoyangzhugu. Furthermore, this study attempted to suggest a more rational way of understanding that can supplement the opinions before. Results : The opinions that fail to provide a rational explanation on Shaoyangzhugu were disposed. It was found that the explanation of Shaoyangzhugu through the Shaoyang's pivot function has a potential of providing a rational understanding of Shaoyangzhugu. Following this, this study made a deduction based on the functions of gallbladder found in the Huangdineijing and explained the Shaoyang's pivot function. This study then proceeded to provide an explanation regarding Shaoyangzhugu based on this. Conclusions : Shaoyangzhugu in Huangdineijing is a function to maintain homeostasis of the skeleton of the whole body by Shaoyang's pivot function.

• Architectural research
• /
• v.8 no.1
• /
• pp.69-76
• /
• 2006

The purpose of this study is to suggest policies to improve the price escalation system in a construction contract through a Policy Delphi technique. The Delphi, including two times questionnaires and a group discussion, was conducted by joining 14 experts. Also, the escalation provisions of various countries were examined. Results of the Delphi showed that the minimum fluctuation rate for price escalation was desirable at a level of 3%. To compute the fluctuation rate, calculating the price fluctuation of overall articles was more desirable than using price indices. A bidding date was more reasonable as the initial date of change in price. Losses caused by price change should be shared between contractor and owner; therefore a deduction rate should be introduced in price escalation. Meanwhile, overhead and profit should be adjusted in proportion to the fluctuation rate; but advance payment or the delayed construction amount should be deducted from the adjusted amount.

• Communications for Statistical Applications and Methods
• /
• v.23 no.1
• /
• pp.57-70
• /
• 2016

Type-II progressive censoring is one of the censoring methods frequently used in clinical studies, reliability trials, quality control of products and industrial experiments. Sometimes in Type-II progressive censoring experiments, the failure rate is low so the waiting time to observe the $m^{th}$ failure will be very long; however, the experimenter may have to terminate the experiment before a predetermined time. In this article, if two generalized types of Type-II progressive censoring are reminded, we then make some changes in the removal method of Type-II progressive censoring such that without reducing the deduction quality, the termination time of the experiment decreases. This can be done with decreasing withdraws throughout the steps of the experiment with a special reasonable method. A simulation study is done and the results are tabulated at the end of this article for a comparison between introduced method and Type-II progressive censoring.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.33-39
• /
• 2004

The performance of a deep water drillship, is investigated with the view of the characteristics of the thrusters and the resistance increasement due to moonpooi. The model tests have been performed to obtain the resistance of two drillships with the moonpooi open and closed including shape changes of moonpool step. To design the DP system, thrust forces of azimuth thrusters have been measured during azimuthing at zero speed condition. Thrusters, azimuthing under the bottom of ship, have the interactions of the other thrusters due to flow changes made by other thrusters, and the existence of ship hull makes the thrust deduction higher than when the thrust operates by itself. The resistance increasement due to the moonpooi is highly dependent on the step height of the moonpool and the draft. It is found that the height of moonpool step can reduce the resistance increasement by moonpool.

• Korean Journal of Logic
• /
• v.8 no.2
• /
• pp.85-107
• /
• 2005

Kleene first investigated a three-valued system which follows the evaluations of the Lukasiewicz infinite-valued logic ${\L}C$ with respect to negation, conjunction, and disjunction, and treats $\rightarrow$ as material-like implication in the sense that A $\rightarrow$ B is defined as ${\sim}A{\vee}B$ in its evaluation. Diense and Rescher extended it to many-valued logic and infinite-valued logic, respectively. This paper investigates a variant of the infinite-valued Kleene-Diense logic KD, which we shall call strong Kleene-Diense logic (sKD): sKD has the same evaluations as KD except that sKD takes a variant of Kleene-Diense implication. Following the idea of Dunn [2], we provide algebraic completeness for sKD together with its deduction theorem.

• Journal of Environmental Science International
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1997

Varing the flow velocity of solution and particle diameter, the mass transfer coefficient of the local electrode on current feeder has been measured in an empty flow reactor, an inert fluidized bed electrode reactor, and an active fluidized bed electrode reactor. It had its maximium value when the bed porosity was 0.6 to 0.65 and decreased with in- creasing the height of local electrode. The mass transfer coefficient was found to be high especially when higher particle was fluidized. Electrochemical deposition of copper dissolved in the synthesized wastewater has been performed in the active fluidized bed electrode reactor. The deduction rate was higher than 90% and the residual concentration of copper decreased to less than 5ppm.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.25-26
• /
• 2011

The objective of this study is to develop the prototype system for microwave heating in a manufacture process of alkali activated Hwangtoh binder as replacement materials for the cement in concrete. In order to achieve this, four research phases are carried out as follows: 1) establishment of a system concept 2) deduction of a system element 3) design of the entire system 4) making of the prototype system for microwave heating.