• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.9
• /
• pp.761-767
• /
• 2005

There exists a structural limit of 2WS cars that drivers would not like simultaneously to follow the desired path and attenuate moments resulting from disturbances because lateral acceleration and yaw rate are coupled inherently. In order to overcome the limit, the 4WS cars that have rear wheel steering as an additional input have been introduced. But the 4WS cars have disadvantages that much cost is required due to structural alteration, it is difficult to be used to the driving circumstances and tire performances are not efficient in nonlinear or large lateral acceleration ranges. Therefore, it is proposed that, in this paper, a robust controller is easy to apply to 2WS cars by using direct yaw moment, decouples lateral acceleration from yaw motion and is robust against disturbances and uncertainties of system parameters, and thus the proposed control method has the advantages of 4WS cars which can be achieved in 2WS cars.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.6
• /
• pp.590-597
• /
• 2009

This paper propose a PI controller that maximizes the degree of stability using a stability in a simplified motor model the applies decoupling control. The PI controller gains are directly from the motor parameters, thereby reducing the element of trial and error, and, the Kharitonov equation was used to evaluate the robustness of the gains to changes in the motor parameters. In addition, the system poles are located in the same position, the proposed method can provide a fast response. The effectiveness of the proposed controller is verified by simulation results.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.2
• /
• pp.43-50
• /
• 1992

In this paper, application of decoupling control method of multivariable system by state feedback to turbo-generating system with 2-input and 2-output is studied. The results of simulation shows tat turbo-generating system is canonically decoupled, and can be controlled against the change of load or frequency by feedback gain.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.45-48
• /
• 1986

In this paper, time optimal positioning control of the robotic manipulator is discussed. The equations for dynamic model of the robotic manipulator are nonolinear, and each link is highly coupled. A feedback linearizing and decoupling transformation makes the dynamic model linearized and decoupled, and optimal control input for the linear and decoupled system is derived.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.128-135
• /
• 1998

In the high speed range for salient type synchronous reluctance motor, the effect of iron loss can not be negligible. In this paper, under he assumption that stator iron loss is generated from the equivalent eddy current in the stator, we derive the voltage equations including iron loss from the model that is added the equivalent iron loss in the equivalent inductance in series. The variation of iron loss is dependent on the increase of the operating frequency change for he worse a performance of the vector control system. As there is cross coupling between the d and q axes, it is hard to apply the vector control to the proposed model. Hence, we propose a decoupling current controller for including the effects of iron loss, And we show that the proposed vector control scheme achieves the desired performances through simulation results.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2375-2377
• /
• 2003

본 논문에서는 2자유도를 가지는 평면형 로봇매니퓰레이터의 궤도제어에 슬라이딩모드 제어기법을 도입한 비 간섭 제어기법을 적용하였다. 따라서 종래의 선형구조해석에 근간을 둔 비 간섭제어와는 달리 파라미터 오차 및 비선형에 의한 영향을 억제할 수 있는 강인한 제어기 설계가 가능하며 매니퓰레이터의 궤도제어에 적용하여 제안한 제어기법의 유용성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2642-2644
• /
• 2000

In this paper, the decoupling $H_{\infty}$ controller which minimizes maximum energy in the output signal is designed to reduce the coupling properties between input/output variables which make it difficult to efficiently control a system. And for a given decoupling $H_{\infty}$ problem, an efficient method is sought to find the controller coefficients through Linear Matrix Inequalities(LMI) by which the problem is formulated into a convex optimal problem.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.980-986
• /
• 1999

In this paper, the optimal controller which decouples a coupled multivariable system and minimizes a quadratic performance index is proposed. Design of the controller is based on the two-degree-of-freedom standard model. The class of all stabilizing and decoupling controllers is parametrized first and the $H^{2}$optimal controller is obtained by using this parametrized form. An illustrative example for a $2{\times}2$ plant is given.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.4
• /
• pp.246-255
• /
• 2000

This paper deals with a novel full digital control method of the three-phase PWM inverter for UPS. The voltage and current of output filter capacitor as state variables are the feedback control input. In addition, a double deadbeat control consisting of a d-q current minor loop and a d-q voltage major loop, both with precise decoupling, have been developed. The switching pulse width modulation based on SVM is adopted so that the capacitor current should be exactly equal to its reference current. In order to compensate the calculation time delay, the predictive control is achieved by the current·voltage observer. The load prediction is used to compensate the load disturbance by disturbance observer with deadbeat response. The experimental results show that the proposed system offers an output voltage with THD less than 2% at a full nonlinear load.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.246-247
• /
• 2017

단상 ac/dc, dc/ac 시스템의 경우, ac와 dc사이의 전력 불균형으로 인해 double line frequency ripple power가 발생한다. 이는 harmonic disturbance을 야기시킨다. 일반적으로 전력 리플을 줄이기 위하여 dc-link에 용량이 큰 전해 커패시터를 사용하는데, 용량이 큰 전해 커패시터는 높은 equivalent series resistance(ESR)을 가지며, 상대적으로 짧은 수명을 갖는 한계를 갖는다. 본 논문은 active power decoupling을 추가함으로써 전해 커패시터를 용량이 작은 필름 커패시터로 대체한 회로 구조를 제시한다. 그리고 dc-link 커패시터 선정방법, 설계한 제어기의 성능과 부하 변동에 따른 실험을 PSIM 시뮬레이션으로 확인하고 실험을 통해 검증한다.