• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.605-612
• /
• 2013

Removal of decay heat from an operating reactor during a prolonged station blackout condition is a big concern for reactor designers, especially after the recent Fukushima accident. In the case of a prolonged station blackout condition, heat removal is possible only by passive means since no pumps or active systems are available. Keeping this in mind, the AHWR has been designed with many passive safety features. One of them is a passive means of removing decay heat with the help of Isolation Condensers (ICs) which are submerged in a big water pool called the Gravity Driven Water Pool (GDWP). The ICs have many tubes in which the steam, generated by the reactor core due to the decay heat, flows and condenses by rejecting the heat into the water pool. After condensation, the condensate falls back into the steam drum of the reactor. The GDWP tank holds a large amount of water, about 8000 $m^3$, which is located at a higher elevation than the steam drum of the reactor in order to promote natural circulation. Due to the recent Fukushima type accidents, it has been a concern to understand and evaluate the capability of the ICs to remove decay heat for a prolonged period without escalating fuel sheath temperature. In view of this, an analysis has been performed for decay heat removal characteristics over several days of an AHWR by ICs. The computer code RELAP5/MOD3.2 was used for this purpose. Results indicate that the ICs can remove the decay heat for more than 10 days without causing any bulk boiling in the GDWP. After that, decay heat can be removed for more than 40 days by boiling off the pool inventory. The pressure inside the containment does not exceed the design pressure even after 10 days by condensation of steam generated from the GDWP on the walls of containment and on the Passive Containment Cooling System (PCCS) tubes. If venting is carried out after this period, the decay heat can be removed for more than 50 days without exceeding the design limits.

• The Plant Pathology Journal
• /
• 제28권1호
• /
• pp.55-59
• /
• 2012

Northern stem canker caused by $Diaporthe$ $phaseolorum$ var. $caulivora$ ($Dpc$) has become a serious disease in soybean. The objectives of this study were to survey the existence of $Dpc$ on soybean in Korea, and to examine the potential pathogenicity of $Dpc$ in seed decay. One such isolate, SSLP-4, isolated from a field-grown plant of the Korean soybean cultivar Danbaekkong, was identified as $Dpc$, based on its morphological and molecular characteristics by sequences of internal transcribed spacer (ITS), translation elongation factor (TEF) 1-${\alpha}$ and ${\beta}$-tubulin regions, as well as pathogenic analyses. Moreover, morphological and molecular analyses revealed that isolate SSLP-4 was nearly identical to $Dpc$ strains from the United States. Pathogenicity tests on hypocotyls of soybean seedlings and detached leaves resulted in typical symptoms of soybean northern stem canker and inoculation on plants at R5-R7 stage caused seed decay. All results suggest that the $Dpc$ strain SSLP-4 can cause both stem canker and seed decay on soybean. Thus, the SSLP-4 isolate has the potential to contribute greatly to understanding of host plant resistance mechanisms, both at vegetative and reproductive growth stages in soybean.

• 한국가스학회지
• /
• 제25권3호
• /
• pp.53-58
• /
• 2021

노년층뿐만 아니라 청년층에 속하는 성인들 사이에서도 병원 외 심장정지(OHCA)를 겪는 심장질환자의 수가 증가하고 있다. 자동심장충격기(AED)는 병원 외 심장정지 환자의 생존율을 개선하는 데 있어 긴요하다. 심장정지 생존율은 제세동 시간에 대하여 지수적으로 감소(decline exponentially)하는 것으로 밝혀졌으나, 자동심장충격기의 최적 배치에 있어 심장정지 생존율의 이러한 특성을 반영한 국내 연구가 미미한 상황이다. 본 연구에서는 자동심장충격기의 최적 입지를 결정하기 위하여 exponential decay coverage 함수를 갖는 최대 gradual coverage 입지 모델에 대하여 고찰하였다. exponential decay coverage 함수는 심장정지 환자의 생존율에 대한 과다추정을 완화한다. 향후 시뮬레이션을 통하여 랜덤한 행인 위치 및 이동을 반영함으로써 행인의 심정지 대응에 있어 창발적인(emergent) 특징을 식별할 수 있는 시설 입지 모델이 개발될 것으로 예측된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권1호
• /
• pp.66-70
• /
• 1997

In this paper a new learning algorithm for curvature smoothing and improved generalization for multi-layer neural networks is proposed. To enhance the generalization ability a constraint term of hidden neuron activations is added to the conventional output error, which gives the curvature smoothing characteristics to multi-layer neural networks. When the total cost consisted of the output error and hidden error is minimized by gradient-descent methods, the additional descent term gives not only the Hebbian learning but also the synaptic weight decay. Therefore it incorporates error back-propagation, Hebbian, and weight decay, and additional computational requirements to the standard error back-propagation is negligible. From the computer simulation of the time series prediction with Santafe competition data it is shown that the proposed learning algorithm gives much better generalization performance.

• Architectural research
• /
• 제7권1호
• /
• pp.19-26
• /
• 2005

Unlike other countries, Korea uses various kinds of wall-paper as finishing material. Conventional wall-paper consists of paper and vinyl, and petrochemical ink is used for the decoration of the surface. Adhesive is used to paste the wall with the wall-paper, which emit substantial amounts of VOCs and formaldehyde. In this study, VOCs characteristics emitted from specimens made of concrete, mortar, gypsum board and wall-paper were investigated using small chamber method. Moreover, concentration and emission factor of BTEX(Benzene, Toluene, Ethylbenzene, m,p,o-Xylene) and TVOC were investigated, and concentration and emission factor decay were estimated. As a result of the prediction, both time-dependent concentration decay and cumulative concentration can be converted into the logarithmic scale. Furthermore, prediction equations were developed from the experimental results under accurately controlled experimental conditions. Therefore, there may be difference if the estimated equations are directly applied to real buildings. Further research should be done on the generalization of the developed prediction equations.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.387-393
• /
• 2001

The flow characteristics on the centerline in case of free jet, sudden expansion jet and impinging jet have been investigated. Centerline flow behaviors and similaritis with mean velocities, turbulent intensities, shear stresses, isotropic structures and turbulent kinetic energies on the streamwise direction were looked into and compared with three jets, The results show that mean velocities have represented potential core and decayed with similar gradients. The turbulent intensities and shear stresses were presented peak values in the self-preserving region, and then they were in decay. Aeolotropy in the initial region were possible returned to isotropy patterns with asymptotic approach in the downstream region. It has been found that the turbulent kinetic energies for the three cases of jet existed in the similarity and they coincided with Gaussian profile.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.37.1-37.1
• /
• 2011

A floating wind turbine dynamic simulation program, 'WindHydro', is newly developed. In order to investigate the characteristics of the program, a series of loading cases are simulated such as (1) wind only case, (2) free decay cases with initial displacement, (3) wave only case (4) wind and wave case. The simulations are carried out for the 5-MW OC3-Hywind model which has a spar buoy and catenary mooring lines. As a result, the reliability of WindHydro is verified in most viewpoints although additional study is still necessary to clear out some uncertainty of the program.

• 대한조선학회지
• /
• 제22권1호
• /
• pp.1-8
• /
• 1985

The buckling characteristics of cylindrical shells with a circular hole, under axially compressed loads, have been analyzed and the results have been compared with existed experimental results. Deflection function with decay factor is assumed, and stress distribution around a circular hole in tensioned infinite plate is used for formulating buckling energy function. Applying Rayleigh Ritz procedure to this energy function, characteristic equation of eigenvalue problem is determined. Buckling load is defined by the minimum value of eigenvalues calculated according to several decay factors, and as the radius ratios of a circular hole (a/R) and shell thickness ratios (R/t) are varied, the reducing characteristics of buckling load are studied. As a result, buckling loads are reduced by about 50% according to some radius ratios ($a/R{\geq}0.15$) of circular hole and are not nearly affected by shell thickness ratio(R/t).

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.108.1-108.1
• /
• 2000

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1983년도 하계학술회의강연.논문초록집
• /
• pp.201-202
• /
• 1983