• Journal of Radiation Protection and Research
• /
• v.32 no.4
• /
• pp.190-193
• /
• 2007

The objective of this study is to recommend the radiation protection design parameters from the shielding point of view for concrete wall between the decay tank room and the primary pump room in TRIGA Mark-II Research Reactor Facility. The shield design for this concrete wall has been performed with the help of Point-kernel Shielding Code Micro-Shield 5.05 and this design was also validated based on the measured dose rate values with Radiation Survey Meter (G-M Counter) considering the ICRP-60 (1990) recommendations for occupational dose rate limit ($10{\mu}Sv/hr$). The recommended shield design parameters are: (i) thickness of 114.3 cm Ilmenite-Magnetite Concrete (IMC) or 129.54 cm Ordinary Reinforced Concrete (ORC) for concrete wall A (ii) thickness of 66.04 cm Ilmenite-Magnetite Concrete (IMC) or 78.74 cm Ordinary Reinforced Concrete (ORC) for concrete wall B and (iii) door thickness of 3.175 cm Mild Steel (MS) on the entrance of decay tank room. In shielding efficiency analysis, the use of I-M concrete in the design of this concrete wall shows that it reduced the dose rate by a factor of at least 3.52 times approximately compared to ordinary reinforced concrete.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1309-1317
• /
• 2007

In this paper, the Induced voltage on transmission line by lightning was calculated using FDTD method and the lightning parameters such as peak voltage, rise time, and decay time for the lightning location and line length were analyzed. To verify the results, lightning induced voltage was measured in the field using real telecommunication line. Results from the collected data were compared with the calculated results. It was found that the rise time and the decay time were increased as the line length and the distance between the line and lightning location were increased. Also, the peak voltage was affected more by the overhead line length than by the total line length, while the rise time and the decay time were more affected by the total line length.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.10
• /
• pp.494-499
• /
• 2001

The effects of accelerated Ultraviolet (UV) radiation on High temperature vulcanized (HTV), Room temperature vulcanized (RTV) silicone rubber and two types of ethylene propylene diene terpolymer (EPDM) used for composite insulator were investigated by hydrophobicity class (HC), surface voltage decay after corona charging, SEM-ES, FTIR and XPS. The contact angle in two kinds of silicone rubber was scarcely change, but EPDM occurred to the loss of hydrophobicity followed by surface cracking and chalking. The surface voltage decay on UV-treated silicone rubber and EPDM showed a different decay trend with UV treatment. EDS and XPS analysis indicated that the oxygen content increased with UV treatment time in all samples. For silicone rubber, the oxidized groups of inorganic silica-like structure increased with UV treatment time. The oxidized carbon of C=O, O=C-O in EPDM increased. These oxidized surface for each material had different electrostatic characteristics, so deposited charges were expected to have different impacts on their surface hydrophobicity. The degradation mechanism based on our results was discussed.

• Journal of Photoscience
• /
• v.3 no.3
• /
• pp.153-158
• /
• 1996

The effects of $\alpha$- and $\beta$-cyclodextrins (CD) on the twisted intramolecular charge transfer (TICT) behavior of p-N,N'-dimethylaminobenzoic acid (DMABA) in buffered aqueous solution have been investigated by examining formation and decay behaviors of the TICT-typical dual fluorescence. The ratio of the TICT emission to the normal emission (I$_a$/I$_b$) increases linearly $\alpha$-CD concentration increases, while in the presence of $\beta$-CD it shows nonlinear dependences on the CD concentration. The analysis of the CD-dependent changes of the I$_a$/I$_b$ and absorption spectra demonstrates formation of 1:1 inclusion complexes between DMABA and CDs. The decay time of the normal emission (ca. 700 ps) is little affected by the formation of $\alpha$-CD inclusion complex, whereas it increases upto ca. 1.6 ns upon formation of $\beta$-CD inclusion complex. The TICT emission for the $\beta$-CD inclusion complex exhibits two decay components while it shows a single component for the $\alpha$-CD inclusion complex, indicating formation of one or two types of inclusion complex in the presence of $\alpha$-CD or $\beta$-CD, respectively. These results are attributed to the CD cavity size dependence on patterns of complexation between CDs and DMABA. The CD size dependences of the TICT fluorescence properties with the orientation of the guest molecule demonstrate that the specific hydrogen bonding between the carboxylic acid group and water plays an important role in the excited-state TICT.

• Mycobiology
• /
• v.47 no.4
• /
• pp.506-511
• /
• 2019

We investigated the antifungal activities of an endophytic fungus identified as Acaromyces ingoldii, found on a loblolly (Pinus taeda L.) pine bolt in Louisiana during routine laboratory microbial isolations. The specific objectives were to determine the inhibitory properties of A. ingoldii secondary metabolites (crude extract) on the mycelial growth of a brown-rot fungus Gloeophyllum trabeum and a white-rot fungus Trametes versicolor, and to determine the effective concentration of A. ingoldii crude preparation against the two decay fungi in vitro. Results show the crude preparation of A. ingoldii from liquid culture possesses significant mycelial growth inhibitory properties that are concentration dependent against the brownrot and white-rot fungi evaluated. An increase in the concentration of A. ingoldii secondary metabolites significantly decreased the mycelial growth of both wood decay fungi. G. trabeum was more sensitive to the inhibitory effect of the secondary metabolites than T. versicolor. Identification of specific A. ingoldii secondary metabolites, and analysis of their efficacy/specificity warrants further study. Findings from this work may provide the first indication of useful roles for Acaromyces species in a forest environment, and perhaps a future potential in the development of biocontrol-based wood preservation systems.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.341-350
• /
• 1996

We determined 6 polycyclic aromatic hydrocarbons (PAHs) fluranthene, pyrene, benz(a)anthracene, chrysene, benzo(a)pyrene, dibenzo(a,h)anthracene). A total of 129 samples has been collected from September 1990 to September 1994 on 2 different types of filters (quartz fiber filter, glass fiber filter) by a PM-10 high volume air sampler at the Kyung Hee University-Suwon campus. The organic components in the PM-10 were extracted by an ultrasonication process with benzene:ethanol(4:1, v/v) prior to the analysis by using a GC/FID. We had also investigated the decaying quantity of 6PAHs at the room temperature. For example, chrysene was decayed by 56.7% after 4 days and benzo(a)anthracene by 84.2% after 30 days. All of PAHs were almost completely decayed after a year. We extensively estimated the decay rates by regression analyses for existing 18 raw data sets. Based on the decay rate constants $(\beta)$, pyrene was rapidly decayed by 19.0 $\times 10^{-2}$/day; on the other hand, dibenzo(a,h)anthracene slowly by 0.7 $\times 10^{-2}$/day. Applying the decay rates of PAHs on stored and dated samples, we could reasonably determine annual and seasonal concentration average of PAHs in particulate matters smaller than 10 $\mu$m.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1992-1993
• /
• 2007

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• KDI Journal of Economic Policy
• /
• v.36 no.1
• /
• pp.43-80
• /
• 2014

This study suggests a model for calculating total benefit rigorously to use the contingent valuation method (CVM) in cost-benefit analysis (CBA). Estimating households' willingness to pay through survey method, the study attempts to demonstrate if a respondent's income and the distance between a respondent's residence and the location of a target facility affect her willingness to pay. The estimation results from a structural model show that income and distance-decay effects exist and that the calculated total benefit varies largely when these effects are ignored. The study emphasizes the effects of income and distance-decay on the total benefit must be carefully considered in using CVM for CBA. Even though the total project cost is precisely estimated, the benefit/cost (B/C) ratio may differ largely when the total benefit is not correctly calculated. Also, an ad hoc model generates significantly different estimates from the utility difference model this study adopted. The difference in estimates suggests that the total benefit has to be estimated by a structural model. Finally, simulations are performed to check the validity of the model as well as to predict consequences when income and distance-decay effects are not properly treated. The results from simulations reveal it is not desirable to ignore those effects considering the perspectives of balanced regional development.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.688-696
• /
• 2023

In the present study, free roll decay and resistance performances of fishing vessels were evaluated with the combinations and variations of in the parameters of appendages which are attached to improve motion performance of fishing vessels. Computational Ffluid Ddynamics was used to perform free roll decay and resistance analysis. The roll period and decay coefficient were derived by the variations in the combination and dimensions of the primary appendages of the bilge keel and the under keel. It was observed thatThe variations of in the length of the under keel did not significantly impact to the roll damping coefficient. Conversely, for the bilge keel, an increase in the length and angle resulted in an increase in the roll damping coefficient. Comparison of resistance performance was additionally assessed among the selected hulls with the appendages and bare hull. The resistance of the hull with the appendages was higher than that of the bare hull due owing to the changes of in the pressure on the surface of the hull and trim angle. Throughout the present study, the impact of appendage parameter and arrangement on the free roll decay and resistance performance of fishing vessels were was assessed,. which This will be beneficial for the application of appendages to fishing vessels.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.27-35
• /
• 2001

This aim of the work presented in this paper is to investigate the factors that affcet chlorine decay and to develop functional relationships that can be used to enhance the durability of network models. predictive relationships were established that correlated the rate of chlorine decay to the various water conditions such as DOC, N $H_3$-N, initial chlorine, contact time, temperature and pH values. Free chlorine residual decreased with increasing temperature, DOC, N $H_3$-N, reaction time and chlorine dose. At 2$0^{\circ}C$, pH 7, The initial chlorine demand per mg as DOC/L and mg as N $H_3$-N/L was about 0.43, 2.69 mg/$\ell$ respectively at 180 minutes contact time. The Reaction between chlorine and humic acids was lasted intil 48hr, but the reaction between chlorine and N $H_3$-N was almost completed in 180 min. When the temperature is raised by 1$0^{\circ}C$, chlorine is more consumed about 0.25 mg/$\ell$ in the absence of organic substances and it is more consumed about 3.4 mg/$\ell$ in the presence of humic acid (5 mg/$\ell$) in water at pH 7 for 180 min. Regression Analysis created the resulting prediction equation for the chlorine decay in a SPSS package of the computer system. The model is as follows; $C_{t}$=1.239+0.707(Co)-0.000529(Time)-0.0112(Temp)+0.02227(pH)-0.42(DOC)-2.132(N $H_3$-N).).