• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.113-121
• /
• 2007

The purpose of this study was to determine the effect of three different plates($0^{\circ}$, $10^{\circ$}, $20^{\circ}$)under heels on the lower limb muscles and erector spinae during squat exercise. Ten high school korean traditional wrestling players(age: $18.5{\pm}0.7$, weight: $1972.2{\pm}128.5N$, height: $177.8{\pm}6.0cm$, weight of barbell: $1004.5{\pm}132.4N$) performed squat exercise using three different tilting plates under heels at a cadence of 40beats/sec with 80% one repetition maximum load. Surface electrodes were placed on the participants' left and right erector spinae, and rectus femoris, vastus medialis, vastus lateralis, tibialis anterior, biceps femoris, medial gastrocnemius, and lateral gastrocnemius in the right lower extremity. One S-VHS camcorder(Panasonic AG456, 60fields/s) was placed 10m to the side of the participant. To synchronize the video and EMG data, a synchronization unit was used for this study. Average and Peak IEMG values were determined for each participant. For each variable, a one-way analysis of variance was used to determine whether there were significant differences among three different tilting plates under heels. When a significant difference was found in plates type, post hoc analyses were performed using the Tukey procedure. A confidence level of p<.05 was used to determine statistical significance. As a result of this study, maximum nEMG values of the tibialis anterior in $0^{\circ}$ plates was significantly higher than the corresponding values for the other plates during the knee extension. This increased activation in the tibialis anterior muscle indicates an increase in displacement of center of gravity of body. It is very likely that additional muscle activation are needed to stop the forward and backward movement. The results also showed that muscular activities of quadriceps femoris and erector spinae were decreased with increasing angle of plates. This suggests that increasing angle of plate may help to sustain the balance and posture of squat exercise. It is considered that very few significant differences were found among three different plates($0^{\circ}$, $10^{\circ}$, $20^{\circ}$) since elite players with much experience in squat exercise, were chosen as a participant of this study. In order to obtain meaningful results regarding the tilting angle of heel plates in squat exercise, kinetic and 3D kinematic analysis will be needed in the future study.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.83-90
• /
• 2004

DVB-MHP recommends that NPT(normal play time) be used as the times of stream events. NPT is the local time within an event(TV program). But we found that commercial transport stream (TS) generators and middlewares for DVB-MHP settop boxes are not ready to support the use of NPT by applications. In particular, TS generators do not create NPT reference descriptors needed to reconstruct NPT at the TV receiver. This situation is undesirable because program providers cannot experiment with the idea of synchronized applications. So we have implemented a TS generator that inserts NPT reference descriptors to TS and MyGetNPT API to approximately reconstruct NPT. STC (system time clock) is needed to reconstruct NPT, but Xlets are not allowed to read it. So, we approximate STC by using PCR (program clock reference) and the Java system tune. In this method, the stream generator extrats PCRs from an existing TS and inserts them into null TS packets in the form of MPEG sections, which can be read by Xlets. Because PCRs are displaced into new positions in TS, their values should be adjusted based on the time intervals between the original positions and the new positions. We implemented a synchronized application by using our TS generator and MyGetNPT API, where the task of stream events are to display graphic images. We found that graphic images are displayed where 240 ㎳ from their intended time, where 240ms is a human tolerance for the synchronization skew between graphic image and video.

• Journal of Embryo Transfer
• /
• v.26 no.4
• /
• pp.271-276
• /
• 2011

This study was focused on improvement of milk production in Mongolian dairy industry by artificial insemination (AI) technology, supported by ODA of KOICA in Republic of Korea. This program was started in January 2009 and it is in $3^{rd}$ years. This manuscript summarized the data especially on estrus synchronization and pregnancy establishment in dairy cows (Holstein) this year. A total of 81 dairy cows from 4 private farms (38 from Undarmal milk and that of 30, 8 and 5 dairy cows from Onjin (Enkhbayer), Jargalant, and BRM School farms respectively) were synchronized with 5 ml Lutalyse (i.m.) in the dump of dairy cows and then estrus was detected 2 to 3 days after $PGF_{2{\alpha}}$ injection. The synchronized dairy cows were inseminated with 0.5 ml dairy frozen semen by conventional artificial insemination (AI) techniques. Pregnancy was diagnosed about 60 days after AI by palpation method. About 96.3% (78/81) of synchronized cows were responded to single $PGF_{2{\alpha}}$ injection. Total 75 over 78 dairy cows (90.1%) inseminated were diagnosed as pregnant. The estrus induction and pregnancy rates were very effective using Lutalyse injection and conventional AI techniques in Mongolian dairy cow. The present results indicated that AI after estrus induction in Mongolian dairy cows could be applied to dairy breeding technology for improving breeding efficiency and milk production of the country.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.451-457
• /
• 2016

To improve security in the data communication field, many studies on the application of chaotic signals to encryption have been conducted in recent years. In this study, a new security protocol where the initial value sensitivity and noise similarity of chaotic signals have been applied to an RFID communication channel was designed. In the case of chaotic systems, if the initial values become identical, the same signals are generated at the same time after that point even though the two systems have been calculated independently. Therefore, an unpredictable security channel can be produced based on such characteristics. However, a security channel can be produced only when an initial value is shared in advance, and thus there is a potential problem of infringement during the transmission of the initial value. To resolve this problem, a method in which a certain proportion of new chaotic signals are applied to two chaotic systems for communication and are then synchronized after some time was proposed. This new method can conceal the initial value, and thus can resolve the problem of the existing communication method using chaotic signals. The designed method was verified with the encryption and decryption of images. It is expected that a more secure RFID system could be established by applying the communication protocol proposed in this study to insecure RFID communication channels.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.94-101
• /
• 2015

The display device is an important video information communication system device to connect between human and device. it transfers the information as characters, shapes, images and pattern to enable recognizing by eyes. Theres absolutely needs some key functions and role to quickly display informations. It can analyse a information through a PPI Scope of a cathode-ray tube(CRT) displays information which can perform a role. this research proposed a radar device to display informations as received signal. The radar display researches can apply to fixed function graphics pipeline algorithms of the large capacity type through a vertical blanking interval and buffer swap of display unit. Also, it can be possible to apply to performed algorithms to FPGA logic without high-performance graphics processing unit GPU through synchronization which can implement a display system. In this paper, we improved the affordability and reliability through proposed research. 이So, we have studied the radar display unit which can change a flat display from radar display of CRT radar display.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.43-48
• /
• 2017

The applicability of refraction survey has been tested using a wave glider widely used in long-term ocean observations around the world. To record seismic refractions, a single channel streamer with metal weight and a seismic recording system were mounted on the wave glider. We used GPS precise time synchronization signal and radio frequency (RF) communication to synchronize shot and recorder triggers and to control acquired data quality in real time. When the wave glider is positioned close to the set point, a 2,000 J sparker is exploded along the designed track at 2 second intervals. Through the test survey, we were able to successfully acquire refractions from the subsurface.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.1
• /
• pp.39-45
• /
• 2012

In this paper, a distributed 2-hop routing algorithm is proposed. The main purpose of the proposed algorithm is to reduce the overall power consumption of each sensor node so that the lifetime of WSN(wireless sensor network) is prolonged. At the beginning of each round, the base station transmits a synchronization signal that contains information on the priority table that is used to decide whether each sensor node is elected as a cluster head or not. The priority table is constructed so that sensor nodes closer to half energy distance from the base station get the higher priority. 2-hop routing is done as follows. Cluster heads inside half energy distance from the base station communicate with the base station directly. Those outside half energy distance have to decide whether they choose 2-hop routing or 1-hop routing. To do this, each cluster head outside half energy distance calculates the energy consumption needed to communicate with the base station via 1-level cluster head or directly. If less energy is needed when passing through the 1-level cluster head, 2-hop routing is chosen and if not, 1-hop routing is chosen. After routing is done each sensor nodes start sensing data.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.628-645
• /
• 2010

To perform the engagement level simulation between the underwater vehicle model and the surface model those are constituted with various systems/ sub-systems, we implemented four different federates as a federation according to the IEEE 1516 HLA (High Level Architecture) protocol that is the international standard in the distributed simulation. Those are CFCS (Command and Fire Control System) federate, motion federate, external entities (torpedos, countermeasure and surfaceship) federate, and visualization federate that interacts with OSG (Open Scene Graph)-based visualization rendering module. In this paper, we present the detailed method about the model constitution for discrete event simulation in the distributed environment. For the sake of this purpose, we introduce the DEVS (Discrete Event System Specification)-HLA-based modeling method of the CFCS federate that reflects not only the interations between models, but also commands from user and tactics manager that is separated from the model. The CFCS federate makes decisions in various missions such as the normal diving, the barrier misision, the target motion analysis, the torpedo launch, and the torpedo evasion. In the perspective of DEVS modeling, the CFCS federate is the coupled model that has the tactical data process model, command model and fire control model as an atomic model. The message passing and time synchronization with other three federates are settled by the $m\ddot{a}k$ RTI (Runtime Infrastructure) that supports IEEE 1516. In this paper, we provides the detailed modeling method of the complicated model that has hierarchical relationship such as the CFCS system in the submarine and that satisfies both of DEVS modeling method for the discrete event simulation and HLA modeling method for the distributed simulation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.7
• /
• pp.421-428
• /
• 2006

In this paper, the way of remote installation and back-up of 3-tier structure is introduced for efficient utilizing the cluster system resources distributed at several places. Recently, cluster system is constructed as the system of over hundreds nodes under complex network system mixed with public networks and private networks. Therefore, the as installation method suitable for the large scale cluster system and the remote recovery of failure nodes are important. However the previous researches which are based on 2-tier architecture may not provide the efficient cluster installation and image back-up method when the network of cluster system is composed of several private networks and public networks. In this paper, RISE (Remote Installation Service and Environment) based on the 3-tier architecture is proposed to solve this problem. In our approach, the managing node's role is divided into the global master node (GRISE) and the local master node (LRISE) to provide the efficient initial system deployment and remote failure recovery of distributed cluster system under the various network systems. Also, LRISE's availability is ensured under the complex network environments by adopting the auto-synchronization mechanism between GRISE and LRISE. In this work, a 64-node cluster system with gigabit network system is utilized for the experiment. From the experimental result, the system image with 1.86GB data can be obtained in 5 minutes and 53 seconds and the image-based installation of 64-node system can be carried out in 17 minutes and 53 seconds.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.120-134
• /
• 2000

In this paper we present a Distributed Object oriented Virtual computing Environment, called DOVE which consists of autonomous distributed objects interacting with one another via method invocations based on a distributed object model. DOVE appears to a user logically as a single virtual computer for a set of heterogeneous hosts connected by a network as if objects in remote site reside in one virtual computer. By supporting efficient parallelism, heterogeneity, group communication, single global name service and fault-tolerance, it provides a transparent and easy-to-use programming environment for parallel applications. Efficient parallelism is supported by diverse remote method invocation, multiple method invocation for object group, multi-threaded architecture and synchronization schemes. Heterogeneity is achieved by automatic data arshalling and unmarshalling, and an easy-to-use and transparent programming environment is provided by stub and skeleton objects generated by DOVE IDL compiler, object life control and naming service of object manager. Autonomy of distributed objects, multi-layered architecture and decentralized approaches in hierarchical naming service and object management make DOVE more extensible and scalable. Also,fault tolerance is provided by fault detection in object using a timeout mechanism, and fault notification using asynchronous exception handling methods