• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.993-1000
• /
• 2012

In this research, we proposed an efficient VLSI architecture of the lifting-based 2D DWT (Discrete Wavelet Transform) filter with 100% hardware utilization. The (9,7) filter structure has been applied and extendable to the filter length. We proposed a new block-based scheduling that computes the DWT for the lower levels on an "as-early-as-possible" basis, which means that the calculation for the lower level will start as soon as the data is ready. Since the proposed 2D DWT computes the outputs of all levels by one row-based scan, the intermediate results for other resolution levels should be kept in storage such as the Data Format Converter (DFC) and the Delay Control Unit (DCU) until they are used. When the size of input image is $N{\times}N$ and m is the filter length, the required storage for the proposed architecture is about 2mN. Since the proposed architecture processes the 2D DWT in horizontal and vertical directions at the same time with 4 input data, the total period for 2D DWT is $N^2(1-2^{-2J})/3$.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.647-654
• /
• 2005

In this paper, we implemented a terrestrial/cable PSIP converting system, so-called a PSIP converter, which is converting a terrestrial PSIP into a cable PSIP for a data broadcasting service in the interoperable network of terrestrial and cable, and define an interface between the PSIP converter and the OOB SI generator by using PMCP messages compliant to ATSC T3/Sl. The exiting PSIP converter just converts a terrestrial PSIP into a cable PSIP compliant to ATSC and OCAP standard and transmits by a MPEG-2 TS format. That is to say, it is not for the digital data broadcasting but for the digital broadcasting. In addition, the PSIP converter can support various types of PSIP information to the OOB SI generator by using PMCP messages defined by a hierarchical structure as per each channel, audio/video event, data event and so on.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.3
• /
• pp.189-199
• /
• 2013

The need for reusing synthetic environment data that are employed in the field of modeling and simulation has recently been rising. SEDRIS (Synthetic Environment Data Representation & Interchange Specification) is a standard to exchange synthetic environment data, and is the specification utilized in various military simulations of the Pentagon for representing and exchanging 3D data. SEDRIS represents environmental areas based on a data model; it can represent wind speed, wind directions, weather changes, the information of buildings, as well as terrain data. In some situations, however, the synthetic environment data stored in SEDRIS format should be converted to various visualization formats. First, because SEDRIS is a form of a super-set, it is necessary to verify whether large scale SEDRIS files are stored successfully through visualization. Second, the synthetic environment data should be visualized in some visualization programs for the simulation results to provide an immersive and realistic sense. In this study, we have developed converters for converting SEDRIS data to various visualization formats and visualized the converted results.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.189-194
• /
• 2016

Recently, there is increasing demand for image processing technology while activated the use of equipments such as camera, camcorder and CCTV. In particular, research and development related to 3D image technology using the depth camera such as Kinect sensor has been more activated. Kinect sensor is a high-performance camera that can acquire a 3D human skeleton structure via a RGB, skeleton and depth image in real-time frame-by-frame. In this paper, we develop a system. This system captures the motion of a 3D human skeleton structure using the Kinect sensor. And this system can be stored by selecting the motion file format as trc and bvh that is used for general purposes. The system also has a function that converts TRC motion captured format file into BVH format. Finally, this paper confirms visually through the motion capture data viewer that motion data captured using the Kinect sensor is captured correctly.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1137-1140
• /
• 2003

The area of the prototype device is less than 80mm$^2$. Operating with a 60ns clock cycle, the device typically dissipates only 300mW. The full functionality was proven by using the methodical test programs based on typical image processing operations. Also, we realized the whole process from conventional gray image to color image. Format converters, implemented using multidimensional access memories, transfer the data between the processing element array and conventional bit-parallel components in real time. The completed system is fully functional and performs typical low-level image processing tasks at speed exceeding 30 frames of traditional TV system per second.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.334-340
• /
• 2012

This project defines Tiled-SENC format for S-57 ENC data usage of the mobile platforms and low-end terminals which are not included in ECDIS carriage requirements of SOLAS Chapter V. Also, the architecture modeling and converting technology of Tiled-SENC have been developed and the performance has been compared with ENC Format.

• Journal of Power System Engineering
• /
• v.16 no.1
• /
• pp.12-18
• /
• 2012

The fluid performance is one of the key design factors considered during the development of torque converters especially at conceptual design stages. Therefore the design environment that allows an easy access to legacy data of fluid performance could be critical to reduce the design life cycle as well as to increase the performance of the torque converter. In this paper we present a computer-based system that enables designers to utilize massive legacy data for their design of torque converters. For the implementation of the system we propose a standard format for the legacy data and build them into the database to be efficiently shared by designers in the company. Also we provide numerous analysis tools in the system that allow, for example, database management, data viewing and document generation for search, analysis and reporting. In the paper the implementation of the system is introduced in detail with its effective user interface.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2126-2130
• /
• 2003

In the integrated systems, that is integrated digital TV(DTV) internet and home automation, like home server, is needed integration of digital TV video signal and computer graphic signal. The graphic signal is operating at the high speed and has time-divide-stream. So the re-request of data is not easy at the time of error detection. therefore EDAC algorithm is efficient. In this paper, we show a scheme, that is integration of graphic and dtv format signal for DTV monitor display. This paper also presents the efficiency error detection auto correction(EDAC) for conversion of graphics signal to DTV video signal. A presented EDAC algorithms use the modified hamming code for enhancing video quality and reliability. A EDAC algorithm of this paper can detect single error, double error, triple error and more error for preventing from incorrect correction. And it is not necessary an additional memory. In this paper The comparison between digital TV video signal and graphic signal, a EDAC algorithm and a design of conversion graphic signal to DTV signal with EDAC function in DTV system is described.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.59-65
• /
• 2011

All-optical signal processing is expected to offer advantages in speed and power consumption against over electronics signal processing. It has a potential to solve the bottleneck issues of ultra-high speed communication network nodes. All-optical serial-to-parallel and parallel-to-serial data converters would make it possible to easily process the serial data information of a high-speed optical packet without optical-to-electronic-to-optical data conversion. In this paper, we explain the principle of simple and easily expandable all-optical serial-to-parallel and parallel-to-serial data converters based on Mach-Zehnder interferometers. We experimentally demonstrate these data converters at 10Gbit/s serial data rate. They are useful all-optical devices for the all-optical implementations of label decoding, self-routing, control of variable packets, bit-wise logical operation, and data format conversion.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.321-327
• /
• 2000

Geographical Information System (GIS) is composed of hardware, software, data, and methods. Among the components, data is considered to be the most important factor in GIS. In this paper, we describes HVF, the most recent technology pioneered by GIS researchers. HVF is a format for efficient usage of spatial object in order to express, save and transform in Internet GIS. Fist, we describe the definition of HVF syntax, then the implementation of Header Section Generation Module and Main Section Generation Module through the API. Second, we develop a spatial object converter for HVF to transform figures into data structures, which are compatible among different GIS applications. For this purpose, we design and implement three units of modules, which are File Manipulation, HVF Import and HVF Export Module. Since the issues of network traffic and Hangul processing in Internet GIS are important, we expecially consider development of HVF in terms of spatial data size.