• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.760-772
• /
• 1999

The CAN is a serial communication protocol for distributed real-time control and automation systems. Data generated from field devices in the distributed control of power plant are classified into three categories: real-time event data, real-time control data, non-real-time data. These data share a CAN medium. If the traffic of the CAN protocol is not efficiently controlled, performance requirements of the power plant system could not be satisfied. This paper proposes a bandwidth allocation algorithm that can be applicable to the CAN protocol. The bandwidth allocation algorithm not only satisfies the performance requirements of the real-time systems in the power plant but also fully utilizes the bandwidth of CAN. The bandwidth allocation algorithm introduced in this paper is validated using the integrated discrete-event/continuous-time simulation model which comprises the CAN network and distributed control system of power plant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5357-5381
• /
• 2018

Cloud computing offers a wide range of on-demand resources over the internet. Utility-based resource allocation in cloud data centers significantly increases the number of cloud users. Heavy usage of cloud data center encounters many problems such as sacrificing system performance, increasing operational cost and high-energy consumption. Therefore, the result of the system damages the environment extremely due to heavy carbon (CO2) emission. However, dynamic allocation of energy-efficient resources in cloud data centers overcomes these problems. In this paper, we have proposed Energy and Service Level Agreement (SLA) Aware Resource Allocation Heuristic Algorithms. These algorithms are essential for reducing power consumption and SLA violation without diminishing the performance and Quality-of-Service (QoS) in cloud data centers. Our proposed model is organized as follows: a) SLA violation detection model is used to prevent Virtual Machines (VMs) from overloaded and underloaded host usage; b) for reducing power consumption of VMs, we have introduced Enhanced minPower and maxUtilization (EMPMU) VM migration policy; and c) efficient utilization of cloud resources and VM placement are achieved using SLA-aware Modified Best Fit Decreasing (MBFD) algorithm. We have validated our test results using CloudSim toolkit 3.0.3. Finally, experimental results have shown better resource utilization, reduced energy consumption and SLA violation in heterogeneous dynamic cloud environment.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.863-865
• /
• 1988

This paper presents a optimal Var allocation algorithm for minimizing transmission line losses and improving voltage profile in a given system. In this paper, nodal input data is considered as Gaussian distribution with their mean value and their variance. A Stocastic Linear programming technique based on chance constrained method is applied, to solve the var allocation problem with probabilistic constraint. The test result in 6-Bus Model system showes that the voltage distribution of load buses is improved and the power loss is more reduced than before var allocation.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2011

In this paper, we propose the data stream allocation algorithms for maximizing sum capacity of downlink multiuser MIMO (Multiple-input Multiple-output) systems with BD (Block Diagonalization). The conventional BD precoding algorithms maximize the capacity by controlling power against channel gain of each user. In multiuser MIMO systems, however, the number of data streams for each user can be used to as another control parameter, which determines the capacity. This paper proposes the data stream allocation algorithm of BD for increasing capacity in multiuser MIMO systems. The proposed algorithm allocates unequal bit stream to each user based on channel matrix of each user for maximizing sum capacity. It is proved that proposed algorithm can achieve the significantly improved sum capacity by computer simulation.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.52-55
• /
• 2004

Digital communication networks have become a core technology in advanced building automation systems. BACnet(${\underline{B}}uilding$ ${\underline{A}}utomation$ and ${\underline{C}}ontrol$ ${\underline{net}}works$) is a standard data communication protocol designed specifically for building automation and control systems. BACnet adopts Master-Slave/Token-Passing (MS/TP) protocol as one of its field level networks. In this study, we introduce a method of implementing bandwidth allocation scheme in the MS/TP protocol. The bandwidth allocation scheme improves the capability of real-time communication of the original MS/TP protocol. The bandwidth allocation scheme introduced in this paper can be easily implemented in the existing MS/TP protocol with a slight modification. In this study, we actually developed the hardware and firmware of MS/TP module in which bandwidth allocation scheme is implemented.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.960-967
• /
• 2014

In this paper, an analytical framework is proposed for the optimization of network performance through joint congestion control, channel allocation, rate allocation, power control, scheduling, and routing with the consideration of fairness in multi-channel wireless multihop networks. More specifically, the framework models the network by a generalized network utility maximization (NUM) problem under an elastic link data rate and power constraints. Using the dual decomposition technique, the NUM problem is decomposed into four subproblems - flow control; next-hop routing; rate allocation and scheduling; power control; and channel allocation - and finally solved by a low-complexity distributed method. Simulation results show that the proposed distributed algorithm significantly improves the network throughput and energy efficiency compared with previous algorithms.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.319-326
• /
• 2007

During the design phase of a system, which requires high reliability and safety such as aircraft, high speed train and nuclear power plant, reliability engineer must set up the target system reliability. To meet a reliability goal for the system, reliability allocation should be done gradually from the system to its element. For this end, first of all, we need to construct functional block diagram based on the design output and PWBS(Project Work Breakdown System). Another important input data for reliability allocation is the relationship between the cost and the reliability. In this study we investigate various reliability allocation models, which can be applicable to aircraft, vehicle, and power plant, and etc. And we suggest a proper reliability allocation model which can be effectively applicable to KTX-II high speed train to achieve the target system reliability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4661-4680
• /
• 2016

Cognitive radio (CR) technology is an effective solution to the spectrum scarcity issue. Collaborative spectrum sensing is known as a promising technique to improve the performance of spectrum sensing in cognitive radio networks (CRNs). However, collaborative spectrum sensing is vulnerable to spectrum data falsification (SSDF) attack, where malicious users (MUs) may send false sensing data to mislead other secondary users (SUs) to make an incorrect decision about primary user (PUs) activity, which is one of the key adversaries to the performance of CRNs. In this paper, we propose a coalition based malicious users detection (CMD) algorithm to detect the malicious user in CRNs. The proposed CMD algorithm can efficiently detect MUs base on the Geary'C theory and be modeled as a coalition formation game. Specifically, SSDF attack is one of the key issues to affect the resource allocation process. Focusing on the security issues, in this paper, we analyze the power allocation problem with MUs, and propose MUs detection based power allocation (MPA) algorithm. The MPA algorithm is divided into two steps: the MUs detection step and the optimal power allocation step. Firstly, in the MUs detection step, by the CMD algorithm we can obtain the MUs detection probability and the energy consumption of MUs detection. Secondly, in the optimal power allocation step, we use the Lagrange dual decomposition method to obtain the optimal transmission power of each SU and achieve the maximum utility of the whole CRN. Numerical simulation results show that the proposed CMD and MPA scheme can achieve a considerable performance improvement in MUs detection and power allocation.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.4
• /
• pp.15-24
• /
• 2010

The purpose of this study is to provide the basic guideline of the archite-ctural planning and design of the women's hospital for optimizing the area compostion and spatial allcoation. The method of this study is to investigate and analyze the functional spatial composition based on the area composition and spatial allocation of the 4 departments space in women's hospital through a analysis of 9 cases study. Data collecting skills such as drawing documents analysis, field survey and observation were used to examine of the present facility condition. Hence this research is to grasp the present condition of department of the women's hospital, to inquire the area composition and spatial allocation. Finally, The derived important factors are expected to use as the basic data at the time of planning for the space programing of design women's hospital.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.3
• /
• pp.219-227
• /
• 2005

In this paper, an optimal power and rate allocation model is mathematically formulated on the forward link of multicell CDMA mobile systems. The model maximizes total utility considering data rates and fairness among cells under delay and PRER (Post RPL Error Rate) constraints. The two-level power and rate allocation scheme is suggested to solve the proposed model. Experimental results show that the proposed scheme provides a good solution in a fast time.