• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.49-57
• /
• 2020

The forced vibration characteristics for two impulse forces with time lag was discussed in the vehicle dull progress model. Detailed numerical analyses of the time domain were performed systematically. By the two exciting impulse forces, the responses of displacement, the velocity, and the acceleration were investigated in detail for the vehicle's vibration. Notably, the forced vibration responses in the time domain can be used to identify and monitor several vehicle vibration models. In order to define the responses of displacement, the velocity, and the acceleration, we applied a numerical technique (i.e., the Runge-Kutta-Gill method[1,2]). These variables were subsequently used to analyze the vehicle's vibration according to the time lapse and while it passed over a bump stock; moreover, the characteristics of the variables were analyzed in detail according to their force conditions. Finally, the intrinsic characteristics of the forced vibration were discussed in the context of the automobile model. Overall, our results indicate that the tested method can be successfully applied under different damped conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권2호
• /
• pp.35-47
• /
• 1990

The natural frequency of lateral vibration for ship's propulsion shafting tends to become lower as the relative stiffness of supproted system of the propulsion shafting decreases and the weight of shafting increases. Especially, the propulsion shafting of high-power ships such as car ferries, roll-on/roll-off, and container ships are susceptible to lateral vibration for their resonant speeds are happened to be in ordinary operating speed ranges. So far, many papers on the lateral vibration of ship's propulsion shaftings are published but they treated mainly special cases and not explained explicitly the calculation process. In this paper, the calculation processes of undamped and also forced damped lateral vibration by the transfer matrix method are presented and the calculation programs are developed. With the developed computer programs, a ship's propulsion shafting which was introduced on the published paper is analyzed for its lateral vibration and also the lateral vibration of the main drive shaft for a lathe is calculated to show the availiability of developed computer programs.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2225-2235
• /
• 2004

An observatory termed 'Steel Swing' has been developed, where a 15000 kg pendulum is hanged from a stiff steel frame. A building element can be tested after inserted between the pendulum and the frame. Free vibration, forced vibration tests and earthquake monitoring were performed on an exposed-type steel column base. The response records monitored during natural earthquakes were used to identify the vibration property of the specimen. Identified system gain was approximated by a theoretical gain of linear SDOF system, and the response calculated based on such a linear system agrees with the monitored response fairly well. This research technique can be applied to check the behaviors of new materials and new details of connections and the safety of non-structural elements as well.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제1권1호
• /
• pp.52-64
• /
• 1993

There exist many frame structural systems having some attachments reducible to damped spring-mass systems, concentracted masses and spring supports. For free and forced vibration analyses of such a system an analytical method based on the receptance method is presented. A framed structure having attachments is considered as a combined system composed of various Timoshenko beam and bar elements and the attachments. So, the vibration characteristics of the system are calculated by synthesizing receptances and Support Displacement Transfer Ratio (SDTR) of beam and bar elements In spectral and/or closed forms, and receptances of the attachments. In forced vibration analysis, arbitrary excitation forces at a point on the structure and displacement excitations at boundaries are considered. Numerical investigations are carried out for verification of the presented method, and the results show good accuracy and very high computational efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권2호
• /
• pp.21-42
• /
• 1989

Recently, multi-branced driving systems are often used for power station systems or for marine propulsion systems to save the initial cost, the man power and to improve the energy efficiency. As the multi-branched power system has a very complicated vibrating system, its analyzing method is quite different from the ordinary method for the single straight system. In this study, the multi-branched power system is reduced to derive equations of free vibration and some analytical methods are studied to solve these equations and computer programs are developed to calcuate their numerical solutions. And also, equations of forced-damped vibration of the multi-branched power system which involves diesel engines are derived and their solving methods are studied. Some computer programs are developed to get responses of the forced vibration with damping and their results are synthesized to get resultant responses. Finally, exciting forces of diesel engine and damping forces of power driving systems are appreciated to help field engineers by suggesting reasonable method of estimating their values.

• Earthquakes and Structures
• /
• 제6권4호
• /
• pp.393-408
• /
• 2014

In this paper, a direct identification of modal parameters using the continuous wavelet transform is proposed. The purpose of this method is to transform the differential equations of motion into a system of algebraic linear equations whose unknown coefficients are modal parameters. The efficiency of the present method is confirmed by numerical data, without and with noise contamination, simulated from a discrete forced system with four degrees-of-freedom (4DOF) proportionally damped.

• 융합정보논문지
• /
• 제11권3호
• /
• pp.132-139
• /
• 2021

고감쇠 차량이 둔턱(bumped barrier)을 넘어갈 때 발생하는 강제 진동의 응답 특성이 연구되었고, 이와 관련하여 특히 강제 진동 차량에서 변위, 속도 및 가속도의 응답 거동을 분석하였다. 또한, 각각의 응답을 얻기 위해 Runge-Kutta-Gill의 수치해석법을 수행하여 시간영역의 분석을 하였다. 강제 진동 모델의 여러 고감쇠 조건으로 응답 특성을 얻을 수 있었고 질량, 감쇠 및 강성을 달리하여 수치 분석 후, 임펄스 충격력으로 차체에 가해지는 모델을 고려하여 강제력에 의한 차량 모델의 응답 특성을 얻었고 실험 결과와 비교하여 그 모델의 타당성을 밝혔다. 진폭 및 차량의 고유진동수도 고려하여 분석하였고 차량 모델의 나이키스트 선도를 구하여 고감쇠의 정도에 따라 특성을 분석할 수 있었다. 상이한 질량, 감쇠 및 강성에 따라 임펄스 충격력에 의한 강제 진동 응답 특성을 분석하였다.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.134-141
• /
• 1993

Electro-Rheological(ER) fluids undergo a phase-change when subjected to an external electic field, and this phase-change typically manifests itself as a many-order-of-magnitude change in the rheological behavior. This phenomenon permits the global stiffness and energy- dissipation properties of the beam structures to be tuned in order to synthesize the desired vibration characteristics. This paper reports on a proof-of-concept experimental investigation focussed on evaluation the vibration properties of hollow cantilevered beams filled with an ER fluid. and consequently deriving an empirical model for predicting field-dependent vibration characteristics. A hydrous-based ER fluid consisting of corn starch and silicone oil is employed. The beams are considered to be uniform viscoelastic materials and modelled as a viscously-damped harmonic oscillator. Natural frequency, damping ratio and elastic modulus are evaluated with respect to the electric field and compared among three different beams: two types of different volume fraction of ER fluid and one type of different particle concentration of ER fluid by weight. Transient and forced vibration responses are examined in time domain to demonstrate the validity of the proposed empirical model and to evaluate the feasibility of using the ERfluid as an actuator in a closed-loop control system.

• Advances in nano research
• /
• 제14권5호
• /
• pp.475-493
• /
• 2023

In the context of nonclassical nonlocal strain gradient elasticity, this article studies the free and forced responses of functionally graded material (FGM) porous nanoplates exposed to thermal and magnetic fields under a moving load. The developed mathematical model includes shear deformation, size-scale, miscorstructure influences in the framework of higher order shear deformation theory (HSDT) and nonlocal strain gradient theory (NSGT), respectively. To explore the porosity effect, the study considers four different porosity models across the thickness: uniform, symmetrical, asymmetric bottom, and asymmetric top distributions. The system of quations of motion of the FGM porous nanoplate, including the effects of thermal load, Lorentz force, due to the magnetic field and moving load, are derived using the Hamilton's principle, and then solved analytically by employing the Navier method. For the free and forced responses of the nanoplate, the effects of nonlocal elasticity, strain gradient elasticity, temperature rise, magnetic field intensity, porosity volume fraction, and porosity distribution are analyzed. It is found that the forced vibrations of FGM porous nanoplates under thermal and live loads can be damped by applying a directed magnetic field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.660-665
• /
• 2006

This paper presents a finite element method to analyze the free and forced vibration of a hard disk drive (HDD) considering the flexibility of a spinning disk-spindle with fluid dynamic bearings (FDBs), an actuator with pivot bearings, an air bearing between head-disk interface and the base with complicated geometry. Finite element equation of each component is consistently derived with the satisfaction of the geometric compatibility of the internal boundary between each component. The spinning disk, hub and FDBs are modeled by annular sector elements, beam elements and stiffness and damping elements, respectively. The actuator am, E-block, suspension and base plate are modeled by tetrahedral elements. The pivot bearing in the actuator and the air bearing between head-disk interfaces are modeled by the stiffness element with five degrees of freedom and the axial stiffness, respectively. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem with the restarted Arnoldi iteration method. Modal and shock testing are performed to show that the proposed method well predicts the vibration characteristics of a HDD.