• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.135-138
• /
• 2008

Many Victims and property damage are caused in fires. In this paper, an flame detection algorithm is proposed to early alarm fires. The proposed flame detection algorithm is based on 2-stage decision strategy of video processing. The first decision is to check with color distribution of input vidoe. In the second, the candidated region is settled as fire region with activity. As a result of simulation, it is shown that the proposed algorithm is useful for fire recognition.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.87-92
• /
• 2009

It has been considered only with the concerned regional damage costs whenever the restoration and flood control measures were established in Korea. If the relationship between regional flood frequency and damages is quantitatively analyzed, more resonable and reliable countermeasure for flood protection and restoration can be proposed. Historical data ('70~'07) about flood damage in Korea were utilized and analyzed to present such relationship using the point frequency analysis. Also, the quadrant analysis was employed to divide into 4 categories: high frequency-high damage, high frequency-low damage, low frequency-high damage, and low frequency-low damage. If the results from this study were utilized well in specific cities and counties in Korea, it would be helpful to establish the countermeasures and action plans for flood protection because it was possible to compare with the relationship between flood frequency and damage of each region. And it would be the fundamental data for estimating the effect of future flood protection plan.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.99-99
• /
• 2020

The frequency and scale of domestic flood damage continues to increase, but the criteria for responding to flood damage have not been established. To this end, research is underway to estimate the amount of rainfall in each region so that it can be used to respond to flood damage. The limit rainfall is defined as the cumulative maximum rainfall for each duration that causes flooding, and this research purpose to improve the threshold rainfall by estimating the damage based on the damage history in units of 5 years and analyzing changes over time. The limit rainfall based on the damage history was estimated by using the NDMS past damage history of the Ministry of the Interior and Safety and the rainfall minutes data of AWS and ASOS. The period for estimating the limit rainfall is 2013 ~ 2017, 2015 ~ 2019, and the limit rainfall is estimated by analyzing the relationship between the flood damage history and the rainfall event in each period. Considering changes in watershed characteristics and disaster prevention performance, the data were compared using 5-year data. As a result of the analysis, the limit rainfall based on the damage history could be estimated for less than about 10.0% of the administrative dongs nationwide. As a result of comparing the limit rainfall by period, it was confirmed that the area where the limit rainfall has increased or decreased This was analyzed as a change due to rainfall events or urbanization, and it is judged that it will be possible to improve the risk criteria of flooding.

• Journal of Environmental Health Sciences
• /
• v.43 no.6
• /
• pp.467-477
• /
• 2017

Objectives: Oxidative stress and DNA damage have been proposed as mechanisms linking pesticide exposure to health effects such as cancer and neurological diseases. We investigated whether protective measures could significantly reduce the levels of biomarkers for oxidative stress and DNA damage in agricultural workers. Methods: In the present study, the levels of malondialdehyde (MDA) and 8-hydroxy-2'-deoxyguanosine (8-OHdG), biomarkers related to oxidative stress and DNA damage, respectively, were analyzed in urine samples collected from agricultural workers in two provinces of Korea (n=60). The influence of wearing personal protective equipment (PPE) and performing protective behaviors on the levels of these two biomarkers was also evaluated. Results: The median urinary levels of MDA and 8-OHdG were 10.45 nmol/mg creatinine and 14.42 ng/mg creatinine in subjects living in region A, while they were 6.25 nmol/mg creatinine and 24.77 ng/mg creatinine in subjects living in region B, respectively. The levels of MDA and 8-OHdG were higher in male farmers. Farmers wearing greater numbers of PPE and performing more protective behaviors had significantly lower levels of MDA. Greater numbers of protective behaviors was significantly associated with lower levels of 8-OHdG. Conclusion: The results of the present study indicate that pesticide exposure could induce oxidative stress and DNA damage in agricultural workers, and that protective measures are important for mitigating pesticide exposure.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.97-107
• /
• 2023

This study analyzed the causes of frost damage and freezing depth for concrete ballast sites in the Gangwon mountainous area, which has a high freezing index, and considered the equation for freezing depth in concrete roadbeds. Comparing the freezing depth tendencies of concrete roadbeds in the Gangwon mountainous area and Gangwon area, it was found that the freezing depth of concrete roadbeds was higher than that of the Gangwon area when the freezing index was less than 400. However, in sections with a freezing index greater than 400, the freezing depth was higher in the Gangwon area than in the concrete roadbeds. This study proposed an equation for computing the freezing depth in the Gangwon area to provide basic data for establishing preventive measures against frost damage during railway and road construction projects in the Gangwon region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.167-170
• /
• 2002

The influence of Si surface damage on Ni-silicide with TiN Capping layer and the effect of $H_2$ anneal are characterized. Si surface is intentionally damaged using Ar Sputtering. The sheet resistance of NiSi formed on damaged silicon increased rapidly as Ar sputtering time increased. However, the thermal stability of Ni-Si on the damage silicon was more stable than that on at undamaged Si, which means that damaged region retards the formation of NiSi. It was shown that $H_2$ anneal and TiN capping is highly effective in reducing NiSi sheet resistance.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.91-99
• /
• 1994

Damage induced by Si ion implantation and its annealing behavior during rapid thermal annealing were investigated by cross-sectional TEM (transmission electron microscopy) and RB ( Rutherford backscattering) spectrum. 150keV and 50keV Si ions were implanted in Si (100) at room temperature with doses of 2${\times}10^{15}cm^{-2}$. And 100keV Si ions were implanted in Si with doses from 1${\times}10^{14}cm^{-2}$. A variety of damage structures were generated by Si ion implantation such as continuous amorphous layer extending to the surface buried amorphous layer and damage clusters. Damage clusters are annealed out at the lower annealing temperature of 550 $^{\circ}C$. However, event at the temperature of 110$0^{\circ}C$ end of range loops remain in the original lower amorphous/crystal interface in the case of continuous and buried amorphous layer formation. Extended defects in the shape of zipper dislocations are also observed at the middle of the recrystallized region in the buried amorphous layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.370-375
• /
• 2016

In this paper, we investigated the electrical properties of crystalline silicon solar cell fabricated with Ni/Cu/Ag plating. The laser process was used to ablate silicon nitride layer as well as to form the selective emitter. Phosphoric acid layer was spin-coated to prevent damage caused by laser and formed selective emitter during laser process. As a result, the contact resistance was decreased by lower sheet resistance in electrode region. Low sheet resistance was obtained by increasing laser current, but efficiency and open circuit voltage were decreased by damage on the wafer surface. KOH treatment was used to remove the laser damage on the silicon surface prior to metalization of the front electrode by Ni/Cu/Ag plating. Ni and Cu were plated for each 4 minutes and 16 minutes and very thin layer of Ag with $1{\mu}m$ thickness was plated onto Ni/Cu electrode for 30 seconds to prevent oxidation of the electrode. The silicon solar cells with KOH treatment showed the 0.2% improved efficiency compared to those without treatment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.82-89
• /
• 2014

The damage in germanium (Ge) optical window irradiated by a near-infrared continuous wave (CW) laser was studied. Laser-induced heating and melting process were surveyed, and the specific laser power and the irradiance time to melt were estimated by numerical simulation. The experiments were also carried out to investigate the macro and micro structure change on Ge window. Results showed that the surface deformation was formed by melting and resolidification process, the damaged surface had a polycrystalline phase, and the transmittance as an optical performance factor in mid-infrared region was decreased. We confirmed that an abnormal polycrystalline phase and surface deformation effect such as hillock formation and roughness increase reduced the transmittance of Ge window and were the damage mechanism of CW laser induced damage on Ge window.

• Geomechanics and Engineering
• /
• v.23 no.6
• /
• pp.575-585
• /
• 2020

In this numerical study, the 2D dynamic behavior of a clayey basin and its effect on damage pattern over basin edge are investigated. To attain this goal, a fully nonlinear time domain analysis method has been applied. Then, the fragility curves of the considered two typical industrial structures for that certain point are estimated using the acceleration time histories recorded at each surface point. The results show that the use of the damage related parameters in site effect analyses, instead of amplification curves, can yield more realistic estimation of the basin dynamic response. In a distance about 150 m from outcrop at the basin edge, the differences between fragility curves increase when increasing the distance from outcrop with respect to the reference rock site. Outside this region and towards the basin center, they tend to occur in rather single curves. Furthermore, to connect the structural damage to the basin edge effect, the earthquake demand value at different points for two typical structures was evaluated. It was seen that the probability of occurrence of damage increases over 250 m from outcrop, while the effect of the basin edge was limited to 150 m in case of the basin edge evaluation by using fragility curves.