• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.267-277
• /
• 2003

The purpose of this study makes a retrofit and rehabilitation practice trough the analysis and the improvement for the underlying problem of current retrofit and rehabilitation methods. Therefore, the deterioration process, the damage cause, the condition classification, the fatigue mechanism and the applied quantity of strengthening methods for slab bridge decks were analysed. Artificial neural networks are efficient computing techniqures that are widely used to solve complex problems in many fields. In this study, a back-propagation neural network model for estimating a management on existing slab bridge decks from damage cause, damage type, and integrity assessment at the initial stsge is need. The training and testing of the network were based on a database of 36. Four different network models werw used to study the ability of the neural network to predict the desirable output of increasing degree of accuracy. The neural networks is trained by modifying the weights of the neurons in response to the errors between the actual output values and the target output value. Training was done iteratively until the average sum squared errors over all the training patterms were minimized. This generally occurred after about 5,000 cycles of training.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.259-261
• /
• 2000

This paper demonstrates the trip of high-voltage motor(6.6kV 4,600Hp). To analyze the causes of damage in motors. exactness analysis of electricity system, analysis inspection of motor and voltage quality analysis fiery development were investigated. This result propose to improvement system and repair method.

• 한국안전학회지
• /
• 제33권3호
• /
• pp.1-7
• /
• 2018

Recently, various engineering approaches have been widely used in the accident investigation field to identify the cause of the accident and to predict damage by accident. Computational analysis is the most commonly used method of accident investigation technique. This technique is mainly used to identify the mechanism of the accident generation and to determine the cause when it is difficult to reproduce the situation at the time of the accident or when it is impossible to perform a reproduction experiment. In this study, The gas explosion analysis for LPG explosion accident generated by defect of the blocking action was performed to determine the accident object, gas leakage amount and predicted the damage caused by the accident using 3D laser scanner and FLACS program. We can quantify the explosive power by LPG gas accident and predict the gas leakage amount, damage by accident and evaluate the stability of the structure through this study. In the future, This method can be widely used in the field of gas safety by improving the reliability and validity of the analysis.

• 한국환경과학회지
• /
• 제32권10호
• /
• pp.693-701
• /
• 2023

In this study, we analyzed 82 dust damage dispute mediation cases over the past 5 years and evaluated cases where the probability of damage was verified through dust concentration measurement, modeling prediction, and chemical composition analysis. The cause of dust damage was a construction site, which accounted for most of the damage (97%), and was closely related to the distance from the construction site, total floor area of the construction site, and construction duration. Compensation was decided in only 33% of dust damage cases, and in only 6% (five cases) were damages determined using scientific techniques such as dust measurement, and forecasting. The main criteria for determining compensation were whether administrative measures were taken and evidence of damage in the form of videos and photos. In the future, measuring or model for the amount of dust damage is necessary to determine whether the limit has been exceeded and to revise the standard for calculating compensation through various lines of evidence of dust damage.

• Structural Engineering and Mechanics
• /
• 제43권5호
• /
• pp.657-678
• /
• 2012

The mismatch of ply orientations in composite laminates can cause high interlaminar stress concentrations near the free edges. Evaluation of these interlaminar stresses and their role in the progressive damage analysis of laminates is desirable. Recently, the authors developed a new method to relate the physically based micromechanics approach with the meso-scale CDM considering matrix cracking and induced delamination. In this paper, the developed method is applied for the analysis of edge effects in various angle-ply laminates such as $[10/-10]_{2s}$, $[30/-30]_{2s}$ and $[45/-45]_{2s}$ and comparing the results with available traditional CDM and experimental results. It is shown that the obtained stress-strain behaviors of laminates are in good agreement with the available experimental results and even in better agreement than the traditional CDM results. Variations of the stresses and stiffness components through the laminate thickness and near the free edges are also computed and compared with the available CDM results.

• 한국터널지하공간학회 논문집
• /
• 제3권3호
• /
• pp.31-43
• /
• 2001

본 연구에서는 안전진단에 관한 기본적 정보를 제공하고 유사한 변상의 발생을 최소화하기 위한 목적으로 터널의 변상사례들에 대한 조사와 분석을 수행하였다. 국내외 터널의 44개 변상사례에 대하여 4개 항목 즉, 내용수명, 변상유형 및 원인, 지질상태 등에 관한 빈도 수를 분석하였다. 이와 더불어 국내 터널분야의 전문가들로부터 안전진단 평가에 관련하여 총 28개 항목에 대한 설문조사를 수행하였다. 본 연구의 결과는 터널의 변상항목 중에는 균열에 의한 변상이 42~58% 정도로 가장 높은 비율을 나타났다. 변상 원인으로는 시공불량에 의한 영향이 높은 비율을 나타내고 있으므로 시공품질의 확보가 중요한 요인으로 사료된다. 설문조사 결과로부터 경직된 평가기준의 완화를 지적하였다. 그리고 각 항목별 중요도를 제시함으로써 인공지능기법 등을 안전진단분야에 적용하기 위한 기초자료로 활용될 수 있을 것이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.651-656
• /
• 2007

Changes in measured structural responses induced by a damage could be significantly smaller than those by environmental effects such as temperature and temperature gradients. It is highly desirable to develop a methodology to distinguish the changes due to the structural damage from those by the environmental variations. In this study, a novel method to extract the damage-induced deflection under temperature variations is presented using the outlier analysis on the deflections obtained using the modal flexibility matrices. The main idea is that temperature change in a bridge would produce global increase or decrease in deflections over the whole bridge while structural damages may cause local variations in deflections near the damage locations. Hence, the correlation between the deflection measurements may show high abnormality near the damage locations. A series of laboratory tests were carried out on a bridge model with a steel box-girder for 14 days. It has been found that the damage existence assessment and localization can carried out for a case with relatively small damage under the temperature variations

• 한국해양공학회지
• /
• 제38권3호
• /
• pp.124-136
• /
• 2024

As the number of offshore wind-power installations increases, collision accidents with vessels occur more frequently. This study investigates the risk of collision damage with operating vessels that may occur during the operation of an offshore wind turbine. The floater used in the collision study is a 15 MW UMaine VolturnUS-S (semi-submersible type), and the colliding ships are selected as multi-purpose vessels, service operation vessels, or anchor-handling tug ships based on their operational purpose. Collision analysis is performed using ABAQUS and substantiation is performed via a drop impact test. The collision analyses are conducted by varying the ship velocity, displacement, collision angle, and ship shape. By applying this numerical model, the extent of damage and deformation of the collision area is confirmed. The analysis results show that a vessel with a bulbous bow can cause flooding, depending on the collision conditions. For damage caused by collision, various collision angles must be considered based on the internal stiffener arrangement. Additionally, the floater can be flooded with relatively small collision energy when the colliding vessel has a bulbous bow.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.106-112
• /
• 2004

In particle or short-fiber reinforced composites, cracking or debonding of the reinforcements cause a significant damage mode because the damaged reinforcements lose load carrying capacity. The average stress in the inhomogeneity represents its load carrying capacity, and the difference between the average stresses of the intact and broken inhomogeneities indicates the loss of load carrying capacity due to cracking damage. The composite in damage process contains intact and broken reinforcements in a matrix. An incremental constitutive relation of discontinuously-reinforced composites including the progressive cracking damage of the reinforcements have been developed based on the Eshelby's equivalent inclusion method and Mori-Tanaka's mean field concept. Influence of the cracking damage on the stress-strain response of the composites is demonstrated.

• 한국가스학회지
• /
• 제22권3호
• /
• pp.53-64
• /
• 2018

천연가스는 폭발성 유체로 고압의 매설 배관 파손시 심각한 인적/물적 손해를 야기할 수 있으며, 최근에도 실제 매설 배관의 파손으로 상당한 인명피해가 발생한 사례가 보고되고 있다. 국내의 경우, 급속한 성장 및 보급에도 불구하고 천연가스 배관의 운영 길이와 운영기간이 짧아 가스배관의 사고원인 등에 대한 유효한 사고데이터의 확립이 부족한 실정이다. 국내에서 사고 사례에 대한 데이터베이스를 체계적으로 구축하기 위하여 국내보다 천연가스 배관의 운용 역사가 길고, 긴 배관망을 갖고 있는 해외 주요국에서 발생한 최근의 천연가스 배관관련 사고의 원인과 빈도를 분석하는 것이 필요하다. 따라서 본 연구에서는 해외 주요국에서 가스배관의 사고원인별 발생 빈도의 추이를 파악한 후 이를 비교 분석하여 국내 고압가스 운송 배관망의 안정성 확보의 토대를 구축하고자 하였다.