• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.102-107
• /
• 2001

Interfacial cracks between an isotropic and orthotropic material, subjected to static far field tensile loading are analyzed using the technique of photoelasticity. The fracture parameters are extracted from the full-field isochromatic data and the same are compared with that obtained using boundary collocation method. Dynamic Photoelasticity combined with high-speed digital photography is employed for capturing the isochromatics in the case of propagating interfacial cracks. The normalized stress intensity factors for static crack is greater when $\alpha=90^{\circ}C$ (fibers perpendicular to the interface) than when $\alpha=0^{\circ}C$ (fiber parallel to the interface) and those when $\alpha=90^{\circ}C$ are similar to ones of isotropic material. The dynamic stress intensity factors for interfacial propagating crack are greater when $\alpha=0^{\circ}C$ than $\alpha=90^{\circ}C$. The relationship between complex dynamic stress intensity factor $|K_D|$ and crack speed C is similar to that for isotropic homogeneous materials, the rate of increase of energy release rate G or $|K_D|$ with crack speed is not as drastic as that reported for homogeneous materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.159-161
• /
• 1997

This paper presents a method of reducing cogging torque and improving average torque by changing the dead zone angle of trapezoidal magnetization distribution of rotor magnet in ring type. Because brushless d.c. motor has 3D shape of overhang, 3D analysis should be used for computation of its magnet field. In this paper, Three Dimensional Equivalent Magnetic Circuit Network method (3DEMCN) which can calculate an accurate 3D magnetic field has been introduced. The method has an advantage that nonlinear magnetic phenomena can be considered and the cogging torque analyses requesting the rotation of the rotor can be performed by the variation of magnetization distribution without remesh.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.675-682
• /
• 2000

An easier implementation method of the field oriented control of induction machine using Matlab/Simulink and dSpace board is proposed in this paper. The total system for the control of induction motor is modeled with the help of Matlab/Simulink. These models consist of induction motor block, SVPWM inverter block and control algorithm block, etc. And this system is simultaneously simulated and experimented in Matlab/Simulink environment with dSpace borad (DS1102). It is possible that Matlab and dSpace board compiler can make $^'{\ast}.c'\;and\;^'{\ast}.obj'$ file of models designed in Matlab/Simulink environment automatically. Both Simulation and experimental results are given.

• Bulletin of the Korean Chemical Society
• /
• 제10권1호
• /
• pp.27-30
• /
• 1989

Lithium has been intercalated into $FeMoO_4Cl$, and deintercalated from $LixFeMoO_4Cl$ both electrochemically and chemically. The inserted $Li^+$ ions are stabilized in the distorted octahedral field in interlayer space of $FeMoO_4Cl$. The crystal symmetry is reduced from tetragonal to monoclinic due to the reduction of ferric to ferrous ions in $LixFeMoO_4Cl$ upon lithium intercalation. From the magnetic and structural data, it has been concluded that the high-spin electronic configuration of $Fe^{2+}(d_{xz}^2{d_{y2}^1}{d_1}{2d_z^12}{\cdot}_y2)$, corresponding to $^5E_g$, group term in $D_{4h}$ symmetry, can be stabilized by the elongation of $FeO_4Cl_{2-}$octahedra in a weak ligand field.

• 한국강구조학회 논문집
• /
• 제20권6호
• /
• pp.751-759
• /
• 2008

본 연구에서는 구조적 기본단면인 사각단면중에서 B/D=2,3,4,5 단면을 대상으로 단면주위 흐름상태가 단면의 공기력 특성에 미치는 영향을 살펴보고, 정지/진동하는 B/D=4 사각실린더 주위의 비정상압력장에 POD해석을 도입함으로써 흐름패턴에 따른 POD해석의 고유벡터를 규정하고 실린더 주위 흐름장 안에 공존하는 서로 다른 흐름패턴의 상호간섭과 물리적 모드분해에 관하여 검토하였다. POD해석의 고유벡터 비교를 통해서 칼만와류는 박리버블에 의해서 거의 영향받지 않지만 칼만와류는 단면후류부에서 박리버블의 발달에 상당히 간섭하고 있음을 확인하 였다. 변장비(B/D=2,34,5) 변화에 따른 ${dC_L/d\alpha}$, ${H_1^{*}}$의 정(+)부(-)의 차이, 즉 갤로핑현상에 대한 안정/불안정성은 박리전단층의 재부착에 깊은 관련이 있는 것으로 판단되며 B/D=3,4에서 시간평균적으로 재부착하던 주위흐름장이 칼만와류의 방출을 제어하면 재부착하지 않는 것으로 생각된다. 즉, 칼만와류의 억제는 후류부에서 박리전단층의 곡률이 작아지도록 간섭하고 단면에 있어서 elongation효과를 나타낸다.

• 자원환경지질
• /
• 제32권1호
• /
• pp.19-31
• /
• 1999

In this study, we have estimated lineaments in the Euiseong area, Kyungbuk Province, from Landsat TM by applying the algorithm developed by Kim and Won et al. which can effectively reduce the look direction bias associated with the Sun's azimuth angle. Fratures over the study area were also mapped in the field at 57 selected sites to compare them with the results from the satellite image. The trends of lineaments estimated from the Landsat TM images are characterized as $N50^{\circ}$~70W, NS~$N10^{\circ}$W, and $N10^{\circ}$~$60^{\circ}$E trends. The spatial distribution of lineaments is also studied using a circular grid, and the results show that the area can be divided into two domains : domain A in which NS~$N20^{\circ}$E direction is dominant, and domain B in which west-north-west direction is prominent. The trends of lineaments can also be classified into seven groups. Among them, only C, D and G trends are found to be dominant based upon Donnelly's nearest neighbor analysis and correlations of lineament desities. In the color composite image produced by overlaying the lineament density map of these C-, D-, and G-trends, G-trend is shown to be developed in the whole study area while the eastern part of the area is dominated by D-trend. C-trend develops extensively over the whole are except the southeastern part. The orientation of fractures measured at 35 points in the field shows major trends of NS~$N30^{\circ}$E, $N50^{\circ}$~$80^{\circ}$W, and N80$^{\circ}$E~EW, which agree relatively well with the lineaments estimated form the satellite image. The rose diagram analysis fo field data shows that WNW-ESE trending discontinuities are developed in the whole area while discontinuities of NS~$N20^{\circ}$E are develped only in the estern part, which also coincide with the result from the satellite image. The combined results of lineaments from the satellite image and fracture orientation of field data at 22 points including 18 minor faults in Sindong Group imply that the WNW-ESE trend is so prominent that Gumchun and Gaum faults are possibly extended up to the lower Sindong Group in the study area.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.21-23
• /
• 1999

In this paper, the analysis of the electric field in the chamber of high voltage $SF_6$ GCB(Gas Circuit Breaker) is presented by using C-1 FEM. For this purpose, pre-processing program and post-processing program were developed for axisymmetirc 3 dimensional analysis and the electric field in cylindric chamber was analyzed. Important problem is that electric analysis must be considered coronal due to break-down of $SF_6$ when it is cutted off. To solve this problem, a procedure is needed to verify that the solution of Poisson's equation for scalar potential satisfy charge continuos condition because of using first order element os not satisfy the electric continuous condition, C-1 FEM is introduce to obtain electirc potential and electric field at the same time. Analysis of the distribution of electric field on model was done. It is confirmed that the developed program in this paper applicable to design and to analyze of characteristics in total program as electric characteristics analysis routine.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.45-50
• /
• 2004

The field utilization factor (equation omitted) (the mean electric field / the maximum electric field) of standard sphere gaps was calculated by the charge simulation method, taking into account the ground plane and shanks. n changes mainly with g/r and slightly with 1$_1$, 1$_2$ and 1, where D=2r is the sphere diameter, g is the gap length, 1$_1$ and 1$_2$, respectively, are the lengths of the upper and lower shank, and t is the shank diameter. Generally, (equation omitted) increases as 1$_1$,1$_2$ and t each becomes larger. IEC standard 60052(2002) limits t$\leq$0.2D 1$_1$$\geq$1D and prescribes A=1$_2$＋D＋g where A is the height of the spark point on the upper sphere. Therefore, (equation omitted) is the largest when A=9D and the smallest when A=3D. The simple equation of a straight line, (equation omitted)=1- (g/3r), can generally be used as a representative value of (equation omitted) for a wide variety of sphere diameters that are permitted by the IEC standard. The maximum electric field E$_{m}$ at sparkover of standard air gaps has also been calculated by the relation E$_{m}$=V/(equation omitted)g). E$_{m}$ describes a U-curve for g/r, up to the sphere diameter of 1 m. Moreover, for 1.5-m and 2-m diameters and especially .for negative polarity, sparkover voltages have been calculated by integration of the ionization index.index.

• 대한수학회지
• /
• 제59권5호
• /
• pp.843-867
• /
• 2022

Maynard proved that there exists an effectively computable constant q1 such that if q ≥ q1, then $\frac{{\log}\;q}{\sqrt{q}{\phi}(q)}Li(x){\ll}{\pi}(x;\;q,\;m)<\frac{2}{{\phi}(q)}Li(x)$ for x ≥ q8. In this paper, we will show the following. Let 𝛿1 and 𝛿2 be positive constants with 0 < 𝛿1, 𝛿2 < 1 and 𝛿1 + 𝛿2 > 1. Assume that L ≠ ℚ is a number field. Then there exist effectively computable constants c0 and d1 such that for dL ≥ d1 and x ≥ exp (326n𝛿1L(log dL)1+𝛿2), we have $$\|{\pi}_C(x)-\frac{{\mid}C{\mid}}{{\mid}G{\mid}}Li(x)\|\;{\leq}\;\(1-c_0\frac{1og\;d_L}{d^{7.072}_L}\)\;\frac{{\mid}C{\mid}}{{\mid}G{\mid}}Li(x)$$.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.312-314
• /
• 2002

Magnetic circuit design of HTS (High Temperature Superconducting) motor is important to achieve the power at a given load condition, and it is essential to the thermal design for HTS motor rotors. To determine the result of thermal design, the magnetic field distribution has to be known exactly. On the basis of the 2 dimensional magnetic field analysis, the magnetic field distributions due to several cases are calculated by using Biot-Savart equation and magnetic image method. And the I$_{c}$ of HTS field coil was calculated by using I$_{c}$-B(equation omitted) curve and 3D FEA(Finite Element Analysis).is).