• Journal of Powder Materials
• /
• v.22 no.1
• /
• pp.15-20
• /
• 2015

The composite of porous silicon (Si) and amorphous carbon (C) is prepared by pyrolysis of a nano-porous Si + pitch mixture. The nano-porous Si is prepared by mechanical milling of magnesium powder with silicon monoxide (SiO) followed by removal of MgO with hydrochloric acid (etching process). The Brunauer-Emmett-Teller (BET) surface area of porous Si ($64.52m^2g^{-1}$) is much higher than that before etching Si/MgO ($4.28m^2g^{-1}$) which indicates pores are formed in Si after the etching process. Cycling stability is examined for the nano-porous Si + C composite and the result is compared with the composite of nonporous Si + C. The capacity retention of the former composite is 59.6% after 50 charge/discharge cycles while the latter shows only 28.0%. The pores of Si formed after the etching process is believed to accommodate large volumetric change of Si during charging and discharging process.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.641-643
• /
• 2004

Liquid Zone Control System controls the power of heavy water reactor. Changing the level of each zone compartment regulates one local zone power of 14 zone powers, iud the level is limited less than 90% by the control algorithm to prevent the flood. In recent years, the level and the power was controlled oscillatory in the upper zones. To find out the condition of cycling, the zone control system was modelled with the linear difference equations and identified using parameter estimation. The pole-zero plot showed that the major pole was near the stability boundary, and the system had oscillatory characteristics in nature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.107-117
• /
• 2010

The atmospheric geochemistry of mercury is generalls represented by gaseous elemental phase that exhibits the high environmental mobility and relatively long atmospheric residence time (c.a., 1 year) with its high chemical stability. In the recognition of the environmental significance of its global cycling, enormous efforts have been devoted to the measurements of Hg exchange across air-soil boundary. To be able to describe the fundamental aspects on this subject, the current development in the measurements of atmospheric exchange rates of mercury has been summarized using the current database reported worldwide. As a first step, different techniques commonly employed in its measurements are introduced with the discussions on their merits and disadvantages. Then, the results derived from various field measurement campaigns are also compared and discussed. The direction for the future study of mercury is presented at last.

• KIEAE Journal
• /
• v.2 no.2
• /
• pp.23-31
• /
• 2002

The purpose of this study is to suggest an environmentally friendly energy system of ecological architecture, with the reference to foreign cases, judge feasibility of it. The ecological architecture is very similar to the natural ecosystem. There is growing international scientific consensus that human activities are having a discernible effect on the global climate. Therefore, with a precise understanding of the concept of ecological approach and concrete perception of the necessity it, an establishment of planning which recognizes the ecological architecture as a organism a same time, ensures diversity, stability and cycling stemmed from the ecosystem to various activities through a ecological structure shall bring the introduction of substantial ecological architecture into domestic realm. As a result, in this Age of industrial science, We are proposing useful materials and suggestion regarding the ecological architecture planning of korean cities, by preestimating the characteristics of a city heading toward the Age of the new ecological environment.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.633-637
• /
• 2010

In this study, lithium manganese oxide spinel ($LiMn_{1.9}Fe_{0.1}Nb_{0.0005}O_4$) as a cathode material of lithium ion secondary batteries is synthesized with spray drying, and in order to increase its crystallinity and electrochemical properties, the granulated $LiMn_{1.9}Fe_{0.1}Nb_{0.0005}O_4$ particle surface is coated with lithium titanium oxide spinel ($Li_4Ti_5O_{12}$) through a sol-gel method. The granulated particles present a higher tap density and lower specific surface area. The crystallinity and discharge capacity of the $Li_4Ti_5O_{12}$ coated material is relatively higher than uncoated material. With the coating layer, the discharge capacity and cycling stability are increased and the capacity fading is suppressed successfully.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.252-259
• /
• 2016

Di(1-aminopyrene)quinone (DAQ) as a quinone-containing conducting additive is synthesized from a solution reaction of 1-aminopyrene and hydroquinone. To utilize the conductive property of DAQ and its compatibility with activated carbon, a composite electrode for a supercapacitor is also prepared by blending activated carbon and DAQ (3:1 w/w), and its supercapacitive properties are characterized based on the cyclic voltammetry and galvanostatic charge/discharge. As a result, the composite electrode adopting DAQ exhibits superior electrochemical properties, such as a higher specific capacitance of up to $160F{\cdot}g^{-1}$ at $100mV{\cdot}s^{-1}$, an excellent high-rate capability of up to $1,000mV{\cdot}s^{-1}$, and a higher cycling stability with a capacitance retention ratio of 82% for the 1,000th cycle.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.41-44
• /
• 1995

The electrochromic WO$_3$ thin films were prepared by using an electron - beam evaporation technique. The influence of the electron - beam evaporation conditions. especially the vacuum pressure, and resistance of ITO substrate on the structural and electrochromic properties of the investigated film was presented. This films showed electrochromic behavior in an aqueous electrolyte of 1 M H$_2$SO$_4$. Among these WO$_3$ thin films, films prepared at a vacuum pressure of 10$^{-4}$ mbar were found to be most stable in terms of cycling durability. The chemical stability of film against dissolution in the aqueous solution was also shown to depend on the quantity of water in the film.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.2
• /
• pp.162-168
• /
• 2017

$LiNi_xCo_yMn_zO_2$ cathode materials have been the focus of much attention because of their high specific capacity. However, because of the poor interfacial stability between cathodes and electrolytes, the cycling performance of these materials fades rapidly, especially at high temperatures. In the present paper, we propose the use of tris(trimethylsilyl) phosphate (TMSPO), which contains phosphate and silyl functional groups, as a functional additive in electrolytes. The addition of TMSPO resulted in the formation of cathode electrolyte interphase (CEI) layers on the surfaces of the cathodes and effectively suppressed electrolyte decomposition reactions, even at high temperatures. As a result, cells cycled with TMSPO exhibited remarkable capacity, which remained after 50 cycles (82.0%), compared to cells cycled without TMSPO (64.6%).

• Korean Journal of Microbiology
• /
• v.27 no.3
• /
• pp.272-278
• /
• 1989

The bacteria utilizing 3-chlorobenzoate as a sole carbon and energy source were isolated by Most-Probable-Number technique and identified in Korean coastal waters. Pseudomonas, Moraxella and Flavobacterium were dominant genera and comprised 70.2% of total isolates. Forty-four biochemical, cultural, morphological and physiological testa were performed and average linding cluster analysis was conducted from the test results. Total 92.7% of isolates were clustered into 17 groups under the 80% similarity level. The degradation of 3-chlorobenzoate was performed by many heterogeneous bacteria and the species diversity of these bacterial group offers informations of the stability of bacterial communities in relation to carbon compound cycling in coastal enviromnents.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.4
• /
• pp.263-268
• /
• 2016

This study describes the effect of coating the $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ cathode surface with a homogeneous carbon layer produced by carbonization of polyvinylidene fluoride (PVDF) as a novel organic source. The phase integrity of the above cathode was not affected by the carbon coating, whereas its rate capability and cycling performance were enhanced. Similarly, the cathode thermal stability was also improved after coating, which additionally protected the cathode surface against the reactive electrolyte containing hydrofluoric acid (HF). The results show that coating the $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ cathode with carbon using the PVDF precursor is an effective approach to enhance its electrochemical properties.