• 한국위성정보통신학회논문지
• /
• 제6권1호
• /
• pp.86-96
• /
• 2011

본 논문에서는 SC-CDMA/TDD (Single Carrier CDMA/Time Division Multiplexing) 다중코드 전송에 있어서 송신단에서의 Pre-rake와 수신기에서 주파수 도메인 등화기를 결합한 Pre/Post-FDE (Frequency Domain Equalizer)를 제안하고, 무선 채널 환경 및 사용되는 멀티 코드들의 수에 따라 Post-FDE, Pre-rake, Pre/Post-FDE와 같은 모드들이 선택적으로 구동해야 함을 제안한다. 또한, Pre-rake가 적용되는 시스템에서 Cyclic Prefix의 길이를 최소화 하는 방법이 소개된다. Pre-rake로 전송되는 신호는 수신기에 부가적인 Signal to Noise ratio(SNR)를 제공할 수 있다. 이를 위하여 수신기에서는 시간 도메인에서의 rake combiner를 고려할 수 있다. 그러나, 기존의 Pre-rake만을 고려하는 단말에 비하여 rake combiner와 같은 더 많은 하드웨어를 요구하게 된다. 한편 SC-FDE(CP-CDMA)와 같은 광대역 싱글 케리어 전송 시스템에서 채용되고 있는 주파수 도메인 등화기는 시간 도메인에서의 하드웨어 복잡성을 피하고, 다양한 등화 방법을 고려할 수 있는 특징이 있다. 본 논문에서는 주파수 선택적 특성을 갖는 무선 채널과 사용되는 멀티코드 수에 따라 제안하고자 하는 Pre/Post-FDE와 기존의 Post-FDE와의 성능을 보여 주고자 한다. 제안하는 시스템의 검증을 위하여 멀티 코드 전송에서 가우지안 모델을 이용한 이론적인 분석 및 Pre/Post-FDE와 Post-FDE의 성능을 비교 분석한다.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2637-2642
• /
• 2015

Low-density parity-check(LDPC) 코드는 그 탁월한 에러 정정 능력으로 인해 많은 통신 표준에서 사용되고 있다. 여러 종류의 LDPC 코드 중 quasi-cyclic LDPC(QC-LDPC) 코드가 많이 사용되는데 QC-LDPC 코드의 복호기에는 여러 크기의 rotation을 수행할 수 있는 multi-size circular shifter(MSCS)가 필요하다. MSCS의 구현 방법 중 Benes 네트워크에 기반한 구조가 많이 사용되는데, rotation할 데이터의 개수가 3의 배수일 경우에는 $3{\times}3$ 스위치가 필요하다. 이 논문에서는 기존의 제어 신호 생성에 비해 복잡도가 줄어든 생성법과 기존의 $3{\times}3$ 스위치 구조 보다 더 빨리 동작할 수 있는 $3{\times}3$ 스위치 구조를 제안한다. IEEE 802.16e WiMAX 표준에서 사용되는 QC-LDPC 코드 복호기의 MSCS 에 적용하여 지연 시간을 8.7% 정도 줄이고 면적도 조금 감소시켰다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.868-880
• /
• 2020

One of the main concerns in the structural integrity of offshore pipelines is mechanical damage from external loads. Pipelines are exposed to fatigue failure in welded joints due to geometric discontinuity. In addition, fatigue loads such as currents, waves, and platform motions may cause significant plastic deformation and fracture or leakage within a relatively low-cycle regime. The 2007 ASME Div. 2 Code adopts the master S―N curve for the fatigue evaluation of welded joints based on the mesh-insensitive structural stress. An extension to the master S―N curve was introduced to evaluate the low-cycle fatigue strength. This structural strain method uses the tensile properties of the material. However, the monotonic tensile properties have limitations in describing the material behavior above the elastic range because most engineering materials exhibit hardening or softening behavior under cyclic loads. The goal of this study is to extend the cyclic stress-strain behavior to the structural strain method. To this end, structural strain-based procedure was established while considering the cyclic stress-strain behavior and compared to the structural strain method with monotonic tensile properties. Finally, the improved prediction method was validated using fatigue test data from full-scale girth-welded pipes.

• Korean Journal of Mathematics
• /
• 제24권3호
• /
• pp.567-572
• /
• 2016

Quadratic residue codes are cyclic codes of prime length n defined over a finite field ${\mathbb{F}}_{p^e}$, where $p^e$ is a quadratic residue mod n. They comprise a very important family of codes. In this article we introduce the generalization of quadratic residue codes defined over Galois rings using the Galois theory.

• ETRI Journal
• /
• 제32권4호
• /
• pp.588-595
• /
• 2010

This paper proposes encoding and decoding for nonlinear product codes and investigates the performance of nonlinear product codes. The proposed nonlinear product codes are constructed as N-dimensional product codes where the constituent codes are nonlinear binary codes derived from the linear codes over higher order alphabets, for example, Preparata or Kerdock codes. The performance and the complexity of the proposed construction are evaluated using the well-known nonlinear Nordstrom-Robinson code, which is presented in the generalized array code format with a low complexity trellis. The proposed construction shows the additional coding gain, reduced error floor, and lower implementation complexity. The (64, 24, 12) nonlinear binary product code has an effective gain of about 2.5 dB and 1 dB gain at a BER of $10^{-6}$ when compared to the (64, 15, 16) linear product code and the (64, 24, 10) linear product code, respectively. The (256, 64, 36) nonlinear binary product code composed of two Nordstrom-Robinson codes has an effective gain of about 0.7 dB at a BER of $10^{-5}$ when compared to the (256, 64, 25) linear product code composed of two (16, 8, 5) quasi-cyclic codes.

• Journal of applied mathematics & informatics
• /
• 제34권5_6호
• /
• pp.397-404
• /
• 2016

In this work, a method is given to construct quantum codes from cyclic codes over F₄ + vF₄ which will be denoted as R throughout the paper, where v² = v and a Gray map is defined between R and where F₄ is the field with 4 elements. Some optimal quantum code parameters and others will be presented at the end of the paper.

• 제어로봇시스템학회논문지
• /
• 제8권4호
• /
• pp.299-302
• /
• 2002

Error detection and correction using CRC and the general class of cyclic codes is an important part of designing reliable data transmission schemes. The decoding method for cyclic codes using covering patterns is easily-implementable, and its complexity de-pends on the number of covering patterns employed. Determination of the minimal set of covering patterns for a given code is an open problem. In this paper, an efficient search method for constructing minimal sets of covering patterns is proposed and compared with several existing search methods. The result is applicable to various codes of practical interest.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.396-397
• /
• 2008

OFDM 송수신 시스템에서 채널성능을 개선하기 위해 CDD(Cyclic Delay Diversity) 기술을 적용하면, Frequency Interlea ving의 영향으로 인해 burst error가 randomize되어, convolutional code/Viterbi decoding FEC의 BER 성능개선 효과를 배가 할 수 있다. 그러나 차세대 통신시스템에 적극 활용되는 Turbo FEC는 자체 interleaving 구조를 가지고 있으므로, CDD기술과의 결합으로 인한 영향을 증명하기 위하여, 본 논문에서는 Turbo FEE를 사용하는 OFDM CDD시스템을 MATLAB을 이용한 computer simulation을 통해서 BER 성능을 비교분석 하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.41-45
• /
• 2007

Multi-input multi-output (MIMO) system can increase data rate, capacity and bit error rate (BER) performance compare to traditional single antenna system. However MIMO technique is pointed out the problem that has high complexity to design receiver. So a recent trend of research on the MIMO system pays more attention to simplified implementation of receiver structure. In this paper, we propose differential space time block code (STBC) for MIMO system with cyclic delay diversity (CDD). This structure can provide a very close performance to that of the conventional diversity scheme with maximum likelihood (ML) detection without channel estimation block while the receiver structure is highly simplified. Bit error rate (BER) performance of the proposed system is simulated for an AWGN channel by theoretical and simulated approaches. The results of this paper can be applicable to the 4G mobile multimedia communication systems.

• Steel and Composite Structures
• /
• 제9권1호
• /
• pp.39-58
• /
• 2009

Composite joints, considering the composite action of steel and concrete, exhibit, in general, high strength and high ductility. As a consequence, the use of this type of joint has been increasing in many countries, especially in those that are located in earthquake-prone regions. In this paper, a hysteretic model with pinching is presented that is able to reproduce the cyclic response of steel and composite joints. Secondly, the computer implementation and adaptation of the model in a spring element within the computer code Seismosoft is described. The model is subsequently calibrated using a series of experimental test results for composite joints subjected to cyclic loading. Finally, typical parameters for the various joint configurations are proposed.