• The Journal of the Convergence on Culture Technology
• /
• v.10 no.6
• /
• pp.315-319
• /
• 2024

Magnolia obovata is a naturalized tree that was introduced from Japan for landscaping purposes and is spreading naturally. Its value as a landscape tree is high and its usefulness as a medicine is recognized, but mass propagation methods have not been developed due to the low success rate of cuttings. In this study, field cuttings were attempted using branches pruned in the fall as cuttings. The cuttings were cut to 30 cm in length and planted so that more than half were buried in the ground. A sunshade was put up with black vinyl, and a double vinyl tunnel was made with transparent vinyl to protect the cuttings. The double vinyl tunnel was removed at the end of March. Watering of cuttings mainly depended on natural rainfall, and cuttings were judged successful when new stems were 10 cm or longer along with leaves grown from cuttings in early June and early August. All of the thin cuttings with a diameter less than 8 mm failed to produce leaves, 4 out of 30 cuttings with a diameter of 8-10 mm, and 5 out of 30 cuttings with a diameter greater than 10 mm produced new stems of 10 cm or more along with leaves. The success rate of cuttings propagation was 11.3% of all cuttings and 15% of cuttings with a diameter greater than 8 mm. The results of this study show the possibility that cuttings using Magnolia obovata branches cut by pruning can be a viable propagation method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.3
• /
• pp.184-188
• /
• 1998

Four experiments were conducted to determine growth regulators, their concentrations and treatment time, rooting medium, and plant parts for optimum seedling propagation by stem cuttings in yacon (Polymnia sonchifolia Poepp. & Endl.). NAA was the most effective on rooting, and followed by IBA 2,4-D, and IAA. Dipping the base of cuttings in 50 or 100 ppm solutions of IBA increased rooting ratios. The 100 ppm solution of IBA was 14% higher than the 50 ppm solution for rooting ratios. Rooting medium with equal volumes of clay loam and sand was the most suitable for rooting of cuttings. Cuttings with both terminal bud and the first node or cuttings with both the first and second nodes were higher in rooting ratios than cuttings with only terminal bud or the first or second nodes. Days to rooting was not affected by plant parts.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.249-255
• /
• 2022

The study was conducted to establish a method for the proliferation of hybrid poplar (P. alba × P. glandulosa) clone Bongwha1, an excellent biomass species. It was found that to collect the cuttings of Bonghwa1, it was necessary to use the main stem rather than the axillary branch. Stem growth by green-wood cuttings showed a tendency to decrease as the length of the collected cuttings increased, but the survival rate was low. Therefore, modified leafy stem cutting was attempted to increase the survival rate of the cuttings. In the modified leafy stem cutting method, 4 leaves were included in the cuttings, and especially, cuttings were performed using cuttings containing 2-4 cm xylem parts. Leafy stem cutting increased root growth and the number of stems, as well as the survival rate of hybrid poplar clone Bongwha1 compared to green-wood cuttings. The root growth of the leafy stem cutting poplar was better as there was more xylem part. Using two-year-old nursery stocks, the leafy stem cutting was used to produce about 66 cuttings. This study is expected to contribute to the mass propagation of high-quality nursery stocks.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.218-225
• /
• 2014

Studies were carried out to standardize and develop a suitable macro-propagation technology for large scale production of superior clonal stock through stem cuttings in Commiphora wightii Arnott (Bhandari), a data deficient medicinal plant of arid region. For the purpose, three experiments were conducted. The first experiment was tried to elucidate the impact of various cutting diameters (0.50-0.75 cm, 0.75-1.00 cm, 1.00-1.50 cm, and >1.50 cm) in combination with varying growing conditions (sunlight, shade house and mist chamber) on shoot sprouting and rooting without using exogenous plant growth regulators. Cutting diameter (size 0.75-1.00 cm) in mist chamber has shown maximum sprouting (90.00%) and rooting (73.33%), primary root (6.67) and secondary root (16.67) followed by 1.00-1.51 cm in mist chamber. Minimum sprouting (40.00%), rooting (33.33%), number of shoot (1.33), primary root (1.00) and number of secondary root (1.00) was recorded in cutting diameter (size >1.50 cm) in sunlight. Second experiment was performed to find out optimum growth regulator concentration of rooting hormone (100, 200, 500 and 1000 ppm) of Indole-3-acetic acid (IAA) and Indole-3-butyric Acid (IBA) on adventitious root formation on cuttings diameter (size 0.25-0.50 cm) in comparison to control. Maximum rooting percentage (93.33%) was recorded in 200 ppm followed by 500 ppm (86.66%) of IBA as compared to control, which showed only 60 per cent sprouting. Third experiment was performed with newly formed juvenile micro-cuttings treated with varying concentrations of IAA and IBA. The juvenile cuttings (size 6-10 cm, basal dia <0.25 cm) were selected as micro-cuttings. The cuttings treated with IBA (500 ppm) showed 64.30% rooting as compared to other treatments. Results of above experiments indicate that cuttings (size 0.75-1.00 cm dia) may be developed in mist chamber for better performance. While using heavier cuttings, no growth promoting hormones is required however; growth regulator 200 ppm concentration of IBA rooting hormone was observed optimum for promoting macro-propagation in stem cuttings of lower diameter class (0.25-0.50 cm).

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.246-250
• /
• 2010

This study was conducted to find out the propagation method of a rare variety Daphne kiusiana Miq. in Korea through softwood cuttings. Daphne kiusiana Miq are the evergreen broad leaf tree which have lived in the southern part of Korea. The flowering time of Daphne kiusiana Miq is early spring and the flower has an attractive fragrance. Generally, plants are dioecious and only the male plants are found in Korea. Propagation by seed is very difficult in this tree. Softwood cuttings were taken to establish an efficient propagation method in Daphne kiusiana Miq Cuttings were grown in perlite:vermiculite (1 : 1), perlite, vermiculite, sand rooting media under shaded greenhouses during summer in 2007. The rooting rates of cuttings were 86.7%, 95%, 75% and 95% in perlite:vermiculite (1 : 1), perlite, vermiculite and sand media, respectively. Softwood cuttings taken on July and rooting at $27^{\circ}C$ were significantly improved the growth and rooting rates. Softwood cutting can be an effective means of propagation in Daphne kiusiana Miq.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.9-19
• /
• 1997

These studies were carried out to investigate seed propagation method and conducted using stem cuttings of Styrax japonicus for using as a woody landscape plant. The results are obtained as follows. After the H\sub2\SO\sub 4\ and GA\sub 3\ treatment to the seeds of Styrax japonicus, three months of warm treatment followed by cold stratification for four months increased seed germination rate. The rooting rate of Styrax japonicus was increased by the treatment with concentrated IBA, especially highest at 7,000ppm. Rooting percentages were highest for cuttings taken on July 15, 1995. Therefore, the most effective method for rooting of Styrax japonicus was treatment with 7,000ppm IBA on July 15 cuttings, which showed rooting rate of over 90%. Half-leaf-remained cuttings were more effective than those with two leaves on rooting of Styrax japonicus. Dipping for 10 seconds in IBA solution resulted in rooting rate of over 70%. The longer the treatment time the worse the rooting.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.143-151
• /
• 1998

To develop restoration technologies of natural environment, which is destroyed through the urbanization, industrialization, and the increase of leisure industry, the development of environmental restoration material and those application is greatly needed. Concerning this current issue, an experiment has been conducted to test and an experiment has been conducted to test and analyze the conditions of nutritonal propagation of willow cutting, which is known as a plant with rapid propagation and good growth capability under bad soil conditions and its wide ecological amplitude. 24 various kinds of willow cuttings -2~6 cuttings for each species -were placed into the earth for 57 days and measured the lengths and the diameters of willow cuttings, the possibility of root formation, the total number, and the total length of new shoots and roots. 23 among 24 willow cuttings tested were showing a great growing capacity and a number of new shoots and roots were observed in a relatively short time. This proved that salix is an adequate plant material for quick environmental restoraton . Besides, those willow cuttings could be classified for different site conditions through comparing the ratio of the underground part to the aboveground in total length. The results are as follows; S. dependens, S. matsudana, S. babylonica are the most suitable species for quick vegetaton and S. gracilistyla,S. myricoides,S. alba 'sercia' for erosioni control.

• Journal of Ginseng Research
• /
• v.9 no.1
• /
• pp.42-53
• /
• 1985

This study was carried out to obtain the basic information about the large scale propagation of ginseng (Panax ginseng C.A. Meyer). Therefore, the stem cuttings of 1-year old ginseng, treated with various concentrations of plant growth regulators for 5 seconds (quick dipping) and 24 hours (prolonged soaking), were cultured. The root formation of stem cuttings was varied with the concentrations, kinds, and treatment methods of plant growth regulators. Besides normal-looking roots various malformed roots were observed. In the prolonged soaking method, the culture of stem cuttings, treated with 10 ppm of IBA or NAA, resulted in profuse root regeneration. And stem cuttings, in quick dipping method, treated with 2000 ppm of IBA or NAA resulted in more excellent root regeneration. In general, IBA was more vigorous for the root formation than NAA, The treatment with 50 ppm kinetin or 100 ppm BA brought good result for the retardation of senescence of stem cuttings and BA treatment was more effective than kinetin. As for the saponin content of roots derived from stem cutting culture, the roots, formed by non-treatment of growth regulators, were higher in saponin content than those formed by treatment of growth regulators.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.79-90
• /
• 2006

Tamarix chinenis blooms twice a you and its flowers, branches and leaves make the adjustment of tree shape. Propagation methods and growth characteristics of T. chinensis were studied in order to ascertain its potential use as one of vegetation resources for coast forestation and landscaping. The study results indicated that 1 or 2 you old hard wood cuttings showed higher rooting ratio than greenwood or semi hard wood cuttings. One to one mixture between vermiculite and pearlite appeared to be the best for bed soil, and sea sand and silt(loess) mixture was the next. Sea sand and granitic soil followed after. In terms of seasonal differences, spring cuttings showed the best rooting ratio, root number, and root length. Fall cuttings followed after spring cutting, and summer cuttings showed worst results regarding rooting ratio, root number, and root length. The best rooting promotion effects of growth regulators were observed with sea sand bed soils. There was no significant difference among growth regulators in terms of rooting and shoot growth. Low concentration below 100 ppm of growth regulators was enough for rooting promotion effect. In general, the number and mean length of roots and shoots were showed the excellent records in the sites with high rooting ratio. The study result strongly showed that T. chinensis can be considered as a suitable tree for coast forestation and landscaping because of its easy cutting propagation and rapid growth on saline lands.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.72-77
• /
• 1982

To develop a new propagation method of Korean ginseng (Panax ginseng C.A. Meyer) by cutting, stem cuttings with leaflets obtained from ginseng seedlings were planted in rooting media treated with three levels of NAA concentration. NAA solution of 1.0 ppm was the most effective for the rooting of ginseng stem cuttings as well as for root growth after initiation of the roots from cuttings. A mixture of sand and leaf compost as a rooting medium for ginseng stem cuttings showed the best results in rooting percentage of cuttings and root growth after rooting. An acril film cap covering was very effective to prevent water loss by transpiration from the leaflets of stem cuttings and for rooting and root growth after rooting. Cuttings of leaf petiole with 5 leaflets from 2 year old ginseng plants showed good rooting as well as root growth after rooting in a mixture of sand and leaf compost treated with 1.0 ppm NAA.