• Advances in materials Research
• /
• v.13 no.1
• /
• pp.1-18
• /
• 2024

The present experimental investigation focuses on finding optimal parametric data-set of laser micro-drilling operation with minimum taper and Heat-affected zone during laser micro-drilling of Carbon Nanotube/Epoxy-based composite materials. Experiments have been conducted as per Box-Behnken design (BBD) techniques considering cutting speed, lamp current, pulse frequency and air pressure as input process parameters. Then, the relationship between control parameters and output responses is developed using second-order nonlinear regression models. The analysis of variance test has also been performed to check the adequacy of the developed mathematical model. Using the Response Surface Methodology (RSM) and an Accelerated particle swarm optimization (APSO) technique, optimum process parameters are evaluated and compared. Moreover, confirmation tests are conducted with the optimal parameter settings obtained from RSM and APSO and improvement in performance parameter is noticed in each case. The optimal process parameter setting obtained from predictive RSM based APSO techniques are speed=150 (m/s), current=22 (amp), pulse frequency (3 kHz), Air pressure (1 kg/cm²) for Taper and speed=150 (m/s), current=22 (amp), pulse frequency (3 kHz), air pressure (3 kg/cm²) for HAZ. From the confirmatory experimental result, it is observed that the APSO metaheuristic algorithm performs efficiently for optimizing the responses during laser micro-drilling process of nanocomposites both in individual and multi-objective optimization.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.7-14
• /
• 2012

We frequently confront with cars interfering into our lane on the ramp. We suffered from serious traffic congestion due to the interfering cars. But the police enforcement has not done actively because it's hard to enforce. In this study, we have evaluated the systems to enforce cutting-in cars through the field test. Generally, the image processing method depends on the weather. To overcome this limitation we proposed a new algorithm combined with section detection method. In the filed test we concluded the results as follows. Whereas the violation detection rate of the general image processing was 58.2%, a new algorithm proposed by this study was 74.5%. And, an error rate enforcing vehicles that do not violate was 0.0%. Also, we can use the existing facilities, such as street light because of compact and lightweight systems which are integrated camera with controller. Therefore, we concluded that it is possible to enforce the interfering Cars using vehicle enforcement systems.

• Composites Research
• /
• v.31 no.2
• /
• pp.69-75
• /
• 2018

In this study, a grid panel structure in which the woven CFRP composites were stacked in the orthogonal array was proposed and the mechanical properties were analyzed and studied. The grid parts were fabricated by cutting prepregs and laminating them. The grid panel structure was fabricated by co-curing with lower laminate plate in auto-clave process. The behavior of the proposed grid panel structure was evaluated by tests under tensile, compressive, shear, and bending loads. The effect of increasing the stiffness of the orthogonal grid structure was verified through these tests. In addition, the finite element model was constructed and compared with the test results, confirming the validity and reliability of the test and analysis.

• Restorative Dentistry and Endodontics
• /
• v.41 no.3
• /
• pp.176-181
• /
• 2016

Objectives: This study aimed to compare two nickel-titanium systems (rotary vs. reciprocating) for their acceptance by undergraduate students who experienced nickel-titanium (NiTi) instruments for the first time. Materials and Methods: Eighty-one sophomore dental students were first taught on manual root canal preparation with stainless-steel files. After that, they were instructed on the use of ProTaper Universal system (PTU, Dentsply Maillefer), then the WaveOne (WO, Dentsply Maillefer). They practiced with each system on 2 extracted molars, before using those files to shape the buccal or mesial canals of additional first molars. A questionnaire was completed after using each file system, seeking students' perception about 'Ease of use', 'Flexibility', 'Cutting-efficiency', 'Screwing-effect', 'Feeling-safety', and 'Instrumentation-time' of the NiTi files, relative to stainless-steel instrumentation, on a 5-point Likert-type scale. They were also requested to indicate their preference between the two systems. Data was compared between groups using t-test, and with Chi-square test for correlation of each perception value with the preferred choice (p = 0.05). Results: Among the 81 students, 55 indicated their preferred file system as WO and 22 as PTU. All scores were greater than 4 (better) for both systems, compared with stainless-steel files, except for 'Screwing-effect' for PTU. The scores for WO in the categories of 'Flexibility', 'Screwing-effect', and 'Feeling-safety' were significantly higher scores than those of PTU. A significant association between the 'Screwing-effect' and students' preference for WO was observed. Conclusions: Novice operators preferred nickel-titanium instruments to stainless-steel, and majority of them opted for reciprocating file instead of continuous rotating system.

• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.1157-1182
• /
• 2016

A newly puzzle shape of crestbond rib shear connector is a type of ductile perfobond rib shear connector. This shear connector has some advantages, including relatively easy rebar installation and cutting, as well as the higher shear resistance strength. Thus, this study proposed a newly puzzle shape of crestbond rib with a "${\mho}$" shape, and its shear resistance behaviors and shear strengths were examined using push-out tests. Five main parameters were considered in the push-out specimens to evaluate the effects of shear resistance parameters such as the dimensions of the crestbond rib, transverse rebars in the crestbond dowel, concrete strength, rebar strength, and dowel action on the shear strength. The shear loading test results were used to compare the changes in the shear behaviors, failure modes, and shear strengths. It was found that the concrete strength and number of transverse rebars in the crestbond rib were significantly related to its shear resistance. After the initial bearing resistance behavior of the concrete dowel, a relative slip occurred in all the specimens. However, its rigid behavior to shear loading decreased the ductility of the shear connection. The cross-sectional area of the crestbond rib was also shown to have a minor effect on the shear resistance of the crestbond rib shear connector. The failure mechanism of the crestbond rib shear connector was complex, and included compression, shear, and tension. As a failure mode, a crack was initiated in the middle of the concrete slab in a vertical direction, and propagated with increasing shear load. Then, horizontal cracks occurred and propagated to the front and rear faces of the specimens. Based on the results of this study, a design shear strength equation was proposed and compared with previously suggested equations.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.79-88
• /
• 2002

13%Cr martensitic stainless steel has been used mainly with a material for fish pre-processing machinery. However, it has not very nice cutting section because of little of the carbon content. Therefore, SUS420J2 steel that contents 0.3%C with high-strength in spite of the rust is used with a material for fish pre-processing machinery. However, studies on the corrosion characteristics of SUS420J2 steel are relatively rare. Especially, the corrosion phenomenon may cause serious degradation because the fish pre-processing machinery is exposed always to seawater environment. In this paper, the immersion corrosion test was carried out at seawater environment (pH=7.52) on SUS420J2 steel specimens that have various post-treatment conditions and its corrosion characteristics were evaluated. From test results, the specimens such as base metal, vacuum heat treatment, electrolytic polishing and tempering after quenching tend somewhat sensitive from the corrosion. In the case of vacuum heat treatment specimen of continuous immersion during 360 days, the weight loss ratio was high about seven times when compared with the different specimens. On the contrary, SUS420J2 steel specimen that has the heat treatment of tempering after quenching and the electrolytic polishing was less sensitive from the corrosion, and the weight loss ratio was very low.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1507-1510
• /
• 2005

This study was carried out as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-\mu{m}-deep$ indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.49 GPa and 100 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46-0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined area during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.201-207
• /
• 2018

Infrared(IR) heating has many advantages, such as energy efficiency, reduced heating time, cleanliness, equipment compactness, high drying rate and easy automation. These features of IR heating provide widely industrial applications, such as surface heat treatment in semiconductor fabrication, thermoforming of polymers, drying and disinfection of food products, heating to metal forging, and drying of wet materials. In this study, the characteristics of a protected gold mirror were examined by spectrophotometer and the lifetime of the coating layers were evaluated by a cross-cutting method and salt spray test. The effects of manufacturing conditions on the protected gold mirror were seen and remedies for these effects were noted in order to improve the properties of the protected gold mirror in the drying process. The reflectance and lifetime of the protected gold mirror was influenced by manufacturing conditions, such as surface roughness and forming conditions of the anti-oxide layer, the adhesion layer, the reflecting layer and the protection layer. The results of this study showed that the protected gold mirror manufactured using a buffing method for pre-treatment resulted in the most effective reflectance. In addition, $Al_2O_3$ coating on an Al substrate as an anti-oxide layer was more effective than the anodizing process in the test of reflectance. Furthermore, the protected gold mirror manufactured by layers forming of various materials resulted in the most effective reflectance and lifetime when coated with $Al_2O_3$ as the anti-oxide layer, coated Cr as the adhesion layer, and coated $MgF_2$ as the protection layer.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.925-933
• /
• 2009

This research was carried out by analyzing a form and composition in baseball cap targeting 97 marketing products, and we have typified it by frequency analysis. We have carried out comparing and wearing test between comparative pattern and the most preferred three products of sports brand, fashion brand A, and fashion brand B (flex fit). And also, in order to provide basic indices for developing new pattern, we have carried out analysis of variance. 1. As a result of analyzing a form in baseball cap, the most general pattern type for crown is central cutting with six pieces. In a cap, a basic type with no decoration was the most general. In the size adjustment and decoration, belt type and embroidery type (front or side embroidery of the crown) was the most common, respectively. 2. As a result of comparing and analyzing six-piece typed crown pattern, the comparative pattern was the same and symmetric in size and form of three patterns in front, side, and back. However, the patterns of marketing products of three brands were different in size and form of three patterns in front, side, and back. The patterns of sports brand were the largest in crown height and width, thus it was good at providing activity and motion. The patterns of fashion brand A were the shortest in the crown length and well-curved in front pattern, so it was well-matched with head shape. The patterns of fashion brand B were well-described back side of head since its convex and long patterns in the back head. 3. As a result of wearing test by five-point Likert scale among brand, pattern of fashion brand B outperformed the others since it was well-matched with head shape. In the cap, pattern of fashion brand A is the most preferred which was 7.5 cm of length and 18cm of width.

• Health Policy and Management
• /
• v.9 no.3
• /
• pp.95-112
• /
• 1999

The objectives of this study were to develop the therapeutic recreation programs for relieving depressive symptoms of the elderly and to verify the effect on their psychological condition. The key elements of these programs, which consisted of 9 sessions. were aerobic exercises, group dynamics. and making fun. These programs were developed through a multidisciplinary approach with social workers and the faculties of preventive medicine. The social workers gave these programs to fifteen elderly people at the community center, so called noinjung, for 9 weeks. Before intervention of this program for the experimental group, the baseline was measured by GDS(geriatric depression scale). After intervention for 9 weeks, GDS as an outcome was measured to evaluate the effects of the program. This data was analyzed by $X^2$-test and Wilcoxon signed rank test. and the results were as follows: 1. Based upon the cutting point(GDS = 5) which could distinguish between depression group and normal group, the number for the normal group increased, while the number for the depression group decreased slightly after intervention with the therapeutic recreation programs, however, there was no significant change(p〉0.05). 2. The score of GDS decreased significantly after intervention with the therapeutic recreation programs(p〈0.05). 3. The scores of GDS decreased in widow(or) group and in female group compared to those of the married group and the male group, respectively(p〈0. 05). 4. The score of GDS increased in groups with similar labor and emotional support compared to those of groups with sufficient or less support, respectively(p〈0.05), These findings indicate that the therapeutic recreation programs might be effective for relieving depressive symptoms of the elderly. It is, therefore, suggested that this program be modified and standardized through review of the intervening process, experimental results, and responses of clients for appling in other noinjungs.