• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.78-83
• /
• 2024

This study was carried out to analyze the effect of changes in the light environment caused by the daylight disturbance on the growth, flowering, and cut flower quality of spray chrysanthemums. The spray chrysanthemum 'Yellow Cap' and 'Pitch PangPang' cultivars for cut flowers were artificially shaded to interfere with 66% of sunlight compared to the non-shading, and then the growing and flowering characteristics, and cut flower yield were investigated accordingly. There was no significant difference in the cut flower yield per unit area between the shading and the non-shading treatments. However, the number of days to flowering was 72.1 days for the 'Yellow Cap' and 65.2 days for the 'Pitch PangPang', which were delayed by 14.1 and 8.9 days, respectively, compared to the non-shading light. In the shading treatment, the flower diameter and the number of flowers also decreased by 10% and 15%, and 30% and 28% for both 'Yellow Cap' and 'Pitch PangPang', respectively. The stem length also decreased by 10% and 20%, the stem diameter by 23% and 37%, and fresh weight by 32% and 33%, respectively. The shading treatment delayed the flowering of chrysanthemums and reduced the growth such as flower diameter, number of flowers, and the length and weight of cut flowers. Based on these results, the daylight disturbance by artificial buildings is expected to reduce the productivity and quality of cut flowers by limiting the light intensity needed for chrysanthemum growth, flower bud differentiation, and flower development. Therefore, further research is needed on the rate of decrease in yield and market value according to the degree of shading to relieve damage to chrysanthemum growers caused by the daylight disturbance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.4
• /
• pp.42-49
• /
• 2003

The branch and bound techniques based on cut tree and eigenvector have been Introduced in the literature [1, 2, 3, 6, 9, 12]. These techniques are used as a basis to allocate departments to floors and then to fit departments with unchangeable dimensions into floors. Grouping algorithms to allocate departments to each floor are developed and branch and bound forms the basis of optimizing using the criteria of rectilinear distance. The proposed branch and bound technique, in theory, will provide the optimal solution on two dimensional layout. If the runs are time and/or node limited, the proposed method is a strong heuristic The technique is made further practical by the fact that the solution is constrained such that the rectangular shape dimensions length and width are fixed and a perfect fit is generated if a fit is possible. Computational results obtained by cut tree-based algorithm and eigenvector-based algorithm are shown when the number of floors are two or three and there is an elevator.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.74-83
• /
• 2001

The purpose of this study was investigate to the influence of forest roads characteristics and environment factors on the soil erosion, stability and vegetation survival of cut slope in forest roads. The results obtained could be summarized as follows; 1. The correlated factors between slope erosion and variables in cut slope were altitude, convex, degree of slope, length of slope and soil depth. In the stepwise regression analysis, length of slope and soil hardness was a high significant and its regression equation was given by -89.6136 + 15.0667X14 + 16.6713X15($R^2$ = 0.6712). 2. The main factors influencing the stability of cut slope were significant in order of coverage, middle, convex, length of slope and north, and its discriminant equation was given by -1.019 + 0.064X22 - 0.808X8 - 0.622X24 + 0.742X11 - 0.172X14 - 0.545X6 ($R^2$ = 0.793). 3. The centroids value of discriminant function in the stability and unstability estimated to 1.244 and -1.348, respectively. The boundary value between two groups related to slope stability was -0.1038. The prediction rate of discriminant function for stability evaluation of was as high as 91.3%. 4. The dominant species of invasion vegetation on the cut slope consist with Carex humilis, Agropyron tsukushiense var. transiens, Calamagrostis arundinacea, Miscanthus sinensis var. purpurascens, and Ixeris dentata in survey area. The rate of vegetation invasion more increased by time passed. 5. The life form of invasion vegetation in cut slop showed to $H-D_1-R_{2,3}-e$ type of the hemicryptophyte of dormancy form, dissem inated widely by wind and water of dissminule type, moderate extent and narrowest extent of radicoid type, erect form of growth form. 6. The correlated factors between forest enviroment and coverage appeared north, passage years and middle position of slope at 5% level. The forest environment factors influencing the invasion plants in survey area were shown in order to altitude, passage years, rock(none), forest type(mixed) and stone amount. The regression equation was given by 17.5228 - 0.0911X3 + 3.6189X28 15.8493X22 19.8544X25 + 0.3558X26 ($R^2$ = 0.4026).

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.943-948
• /
• 2006

This study carried out to investigate the effect of cutting stimulation on time of cutting, yield and length of antler in Sika deer. There was no significance between surgical stimulation and length of antler, but length was the longest in one side cutting group and the shortest in both side cutting group. Development of point was increased as the number of wounds in the second year (P<0.05). Time of casting was 2 weeks earlier in one side cutting group (P<0.05) than in both sides cutting group. Yields of velvet antler were 148±23g when pedicle was not cut, and 126±61g, 179±63g, 170g, and 48±25g when pedicle was cut by 0.3cm, 0.4cm, 0.5cm and 0.6cm thickness, respectively. In case of 0.6cm, yield was significantly smaller than others (P<0.05). The most desirable thickness of pedicle cut was 0.4～0.5mm. Yield of antler was increased as the size of wound in the first year, and 588, 790 and 657g in control, one-cut and both-cut, respectively. Yields of antler in one-cut is significantly high (P<0.05).

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.115-121
• /
• 2006

This study carried out to investigate the effect of cutting stimulation on time of cutting, yield and length of antler in Sika deer. There was no significance between surgical stimulation and length of antler, but length was the longest in one side cutting group and the shortest in both side cutting group. Development of point was increased as the number of wounds in the second year (P<0.05). Time of casting was 2 weeks earlier in one side cutting group (P<0.05) than in both sides cutting group. Yields of antler were $148{\pm}23g$ when pedicle was not cut, and $126{\pm}61g$, $179{\pm}63g$, 170g, and $48{\pm}25g$ when pedicle was cut by 0.3cm, 0.4cm, 0.5cm and 0.6cm, respectively. The most desirable thickness of pedicle cut was 0.4-0.5mm. Yield of antler was increased as the size of wound in the first year, and 588, 790 and 657g in control, one-cut and both-cut, respectively. Yields of antler in one-cut is significantly high (P<0.05).

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.177-184
• /
• 2005

The Sapaesan tunnel, the longest twin tube tunnel (4km) in Korea with 4 lanes each, is under construction with two years of delayed schedule because of the strong opposition from environmental bodies. Therefore, maximizing the construction efficiency was needed in tunnel project to compensate for time delay. This study includes improvements in the construction of the Sapaesan tunnel such as increasing excavation length and changing excavation sequence. In this paper the system for predicting tunnel face ahead is also introduced. Bulk-Emulsion explosive and Cylinder-Cut method were adopted in tunnel blasting to increase the excavation length. Optimum tunnel excavation step was designed to make up delayed time. Tunnel foe mapping, TSP survey and geological prediction system using computerized jumbo-drill were performed fnr safe construction of long and large twin tube tunnel.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.400-403
• /
• 1988

This study was conducted to evaluate the polishing process that affects the polishing properties and cooking qualities of cut-polished barley. Naked barley, Youngsanbori (Sedohadaka), which was produced in Cheonnam province, Korea in 1981, was cut and polished to have the polished yield per cent of four grades, 68.27, 72.85, 75.51 and 78.70, in contrast to the conventionally polished barley which was polished up to 70.10 per cent. Length. thickness and width of the kernels and weight of 1,000 kernels of the cut-polished barley were increased with improving the grade of the polishing yield. Energy consumption was found to be reduced according to increasing the polishing yield of the cut-polished barley. As polishing yield of the cut-polished barley were increased. the contents of P$_2$O$\_$5/, K$_2$O, MgO and Mn were increased. Also whiteness, water uptake and expanding volume of cooked barley were increased in accordance with upgrading the polishing yield of the cut-polished barley.

• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.63-69
• /
• 2003

Filtering is necessary to reduce statistical noise and to increase image quality in SPECT images. Noises controled by low-pass filter designed to suppress high spatial frequency in SPECT image. Most SPECT filter function control the degree of high frequency supression by chosing a cut of frequency. The location of cut off frequency determines the affect image noise and spatial resolution. If select the low cut off frequency, its provide good noise suppression but insufficient image quantity and high cut off frequencies increase the image resolution but insufficient noise suppression. The purpose of this study was to determines the optimam cut off level with comparison of FWHM according to cut off level in each kiters-Band-limited, Sheep-logan, Sheep-logan Hanning, Generalized Hamming, Low pass cosine, Parazen and Butterworth filter in SPECT camera. We recorded image along the X, Y, Z-axis with $^{99m}TcO_4$ point source and measured FWHM by use profile curve. We find averaged length is $9.16\;mm{\sim}18.14\;mm$ of FWHM in X, Y, and Z-axis, and Band-limited and Generalized Hamming filters measures 9.16 mm at 0.7 cycle/pixel cut off frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1493-1495
• /
• 1997

Cropping of head and tail ends of rod in wire Rolling Process is required to aviod roll damage, and prevent cobbles. In order to reduce the crop loss, the new crop control system for rotary shear of Wire rolling Process has been developed. Performance shows the developed system cut precisely within setting length. As a result, it is expected to increase the yield ratio of products about 0.2 percent and stabilize the operantional condition.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2009

This study was conducted to improve commercial quality of a cut spray chrysanthemum 'Gama' bred in Korea by foliar application of daminozide (DMZ), suppressing excessive elongation of peduncle caused by high temperature in summer season production. Applications were made at three floral bud developmental stages (I, II, and III), and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. Both cut flower length and peduncle length showed the greatest suppression of elongation by DMZ treatments at stage II. DMZ also gradually reduced values of those in a concentration-dependant manner. Stem thickness and flower diameter reduced compared to control as DMZ was sprayed at later stage and those two characteristics decreased in a concentration-dependant manner. The number of paralleled flowers neighboring apical part of whole plant showed the best results at stage I and II. As for DMZ concentration, those increased effectively at $500-1,000mg{\cdot}L^{-1}$. Among all combinations, $1,000mg{\cdot}L^{-1}$ DMZ at stage II recorded the most paralleled flowers and showed 24.2% increment as compared to control. The number of fully expanded flowers and total floral buds also showed the highest values using $1,000mg{\cdot}L^{-1}$ DMZ at stage II than the other treatments. In cut spray chrysanthemum cultivar 'Gama' bred in Korea, foliar-spraying with $1,000mg{\cdot}L^{-1}$ DMZ at stage II most effectively suppressed excessive peduncle elongation, parallelled flower cluster arrangement, and increased the number of flowers in summer. However, this combination affected negatively the other commercial qualities, reducing cut flower length, stem thickness, and flower diameter. Therefore, we recommended that foliar-spraying stage and DMZ concentration was stage I and $1,000mg{\cdot}L^{-1}$, respectively, in a practical culture for 'Gama'.