• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.956-965
• /
• 1998

Hot-wire measurement of the longitudinal and radial velocity components and Reynolds stresses are reported for developing turbulent flow in a strongly curved 180 deg. pipe and its tangents. Slanted wire is rotated to 6 directions and the voltage outputs of them are combined to obtain the mean velocities and Reynolds stresses. Significant double maxima in the longitudinal velocity component appear in the bend. V-profiles reveal the development of a strong secondary flow. This secondary flow is induced by the transverse pressure gradient set up between the outer(r$\sub$o/) and inner(r$\sub$i/) wall region of the bend. Another second cross-stream flow develops after .theta.=135 deg. and its direction is opposed to that of main second flow.

• 한국의류학회지
• /
• 제20권3호
• /
• pp.452-466
• /
• 1996

The purpose of this study is to proviede basic data for designing sports-brassiere by a questionnaire survey about sports-brassieres preferences and physiological wearing test. The results of the survey and the physiological wearing tests on sports-brassieres are as follow; 1. According to the survey, dissatisfied factors on the sports-brassiere are "drooping and vibrating of the breasts". Preferable factors are supporting breasts by stretch and seldom changing its position by motion. The bigger cup-size and more hemispherical-type causes more discontent than flat-type. 2. The shape of breasts is oval, on what ground, horizontal line is longer than vertical. For the cross section of bust line, shirts type.brassiere is more gently curved than cup-brassiere. 3. The feeling of wearing comfort is correlated with bust.up, shield, close adhesion. The vibration of breasts is correlated with covering urea and close adhesion, and the changing band's position by movement, close adhesion. Too much covering area or strain are in inverse correlation of the comfort. 4. The rate of prevention of vibration is 75~80% on superior sports-brassieres, which has broad covering area and excellent close adhesion. adhesion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1550-1556
• /
• 2009

The sophisticated technologies, ensuring both stability and curving performance, are required for the medium high speed train running on conventional railway line where tangent and curved section mixed together. We can hardly meet the both requirements conflicting each other with the conventional type of bogie. Effective solution is to apply stabilizing mechanism for the bogie design, which increase hunting stability or dynamically critical speed while maintaining curving performance. In this research the numerical analysis by means of multi-body dynamic simulation S/W, experiments by using roller test rig and main line running test have been comprehensively performed for the 200km/h Korean Tilting Train with newly developed stabilizer. The paper proposes the effectiveness of stabilizer and its usefulness based on the results of analyses.

• 전산구조공학
• /
• 제11권4호
• /
• pp.239-251
• /
• 1998

본 연구에서는 비대칭 박벽단면을 갖는 곡선보의 안정성해석을 수행할 수 있는 이론 및 엄밀해를 제시하기 위하여, 3차원 연속체로부터 유도된 평형방정식으로부터 선형화된 가상일의 원리를 적용하였다. 박벽단면의 구속된 ？(warping)과 곡률효과를 고려하고 유한한 회전각의 2차항을 포함하는 곡선보의 변위장을 도입하여 단면에 대해 적분함으로써 도심축에 대한 박벽 곡선보의 총포텐셜에너지를 유도하였다. 또한, 단순지지되고 일축대칭 단면을 갖는 박벽원형 곡선보의 면내 및 면외좌굴에 대한 엄밀해를 유도하기 위하여, 면내에 대해서는 균일압축을 받는 원형아치의 역대칭 좌굴모드에 대한 좌굴하중을 유도하고 면외좌굴에 대해서는 균일압축 및 순수휨을 받는 아치의 처짐함수를 가정하여 곡선보의 횡좌굴하중에 대한 일반해를 제시하였다.

• 소성∙가공
• /
• 제12권4호
• /
• pp.348-357
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. A center point fur area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.25-32
• /
• 2011

The objective of present work is to use numerical simulation to investigate the complex three-dimensional and secondary flow structures developed at the inlet and impeller in a centrifugal pump at design and off-design points. The pump impeller is shrouded with 6 backward swept blades and with a specific speed of 0.8574. The characteristic of the pump is measured experimentally with straight and curved intake sections. Numerical computation is carried out to investigate the pump inlet flow structures and subsequently the flow field within the centrifugal pump. The numerical results showed that strong interaction between the impeller eye and intake section. Secondary flow structure occurs upstream at the pump inlet has great influence on the pump performance and flow structure within the impeller.

• Tribology and Lubricants
• /
• 제13권3호
• /
• pp.93-101
• /
• 1997

The numerical results on the stress distributions of rail-wheel contact problems are presented for three models in a high-speed rail system. These models which have straight and tapered (1:40 and 1:20) contact geometries between the wheelset and rail are analyzed using the finite element approach. From the simulation results we found that the tapered geometry (1:20) of railwheel contact base line showed very stable contact stress distributions for a whole contact position between the wheel and rail in a curved rail section. The FEM computed results may present an optimized slope geometry of rail-wheel contact in a high-speed railway system.

• Advances in aircraft and spacecraft science
• /
• 제6권1호
• /
• pp.19-30
• /
• 2019

Two- and three-dimensional turbulent airflows in a 9-degrees-bent channel are studied numerically. The inner surfaces of upper and lower walls are parallel to each other upstream and downstream of the bend section. The free stream is supersonic, whereas the flow at the channel exit is either supersonic or subsonic depending on the given backpressure. Solutions of the Reynolds-averaged Navier-Stokes equations are obtained with a finite-volume solver ANSYS CFX. The solutions reveal instability of formed shock waves and a flow hysteresis in considerable bands of the free-stream Mach number at zero and negative angles of attack. The instability is caused by an interaction of shocks with the expansion flow formed over the convex bend of lower wall.

• 한국통신학회논문지
• /
• 제29권8A호
• /
• pp.950-961
• /
• 2004

이 논문에서는 최근 무선 통신 환경으로 증가하고 있는 지하철 터널 환경에서의 전파 특성을 측정하고 분석하였다. 측정은 지하철 터널에서 2.45㎓와 5.8㎓의 주파수 대역을 가지고 수행하였다. 측정을 위해 사용된 터널의 길이는 LOS(line of sight: LOS)가 175m이고, NLOS(non line of sight: NLOS)가 270m이다. 지하철 터널은 곡선형이며, 그 단면은 마제형(horseshoe type)이다. 측정 시스템은 협대역 시스템과 광대역 시스템을 이용한다. 협대역 시스템은 경로손실(path loss: PL) 측정을 위해 사용되고 광대역 시스템은 전력지연프로파일(power delay profile: PDP) 측정을 위해 사용된다. 특히, 광대역 시스템은 슬라이딩 코릴레이션 기법을 기반으로 80MHz 칩율과 1023길이의 PN 시퀀스 발생기로 구성하였다. 안테나 빔 형태에 따른 전파특성을 분석하기 위해서 무지향성 안테나와 지향성 안테나를 사용하였다. 경로손실은 터널 환경의 순수한 경로손실만을 나타내었다. 지연 프로파일은 평균초과지연(Mean Exess Delay)와 RMS 지연확산(RMS delay spread)에 대해서 분석하였다.

• 대한전자공학회논문지TC
• /
• 제43권5호
• /
• pp.162-168
• /
• 2006

전파 특성의 이해는 무선 통신 시스템의 설계와 서비스의 구축을 위해 매우 중요하다. 본 논문에서는 곡선형 지하철 터널환경에서 2.45GHz 주파수 대역의 전파 특성을 측정하고 분석하였다. 슬라이딩 코릴레이션 기반의 채널 측정 시스템을 구성하고 안테나의 빔 형태에 따른 특성을 비교하기 위해 5 종류의 안테나를 사용하였다. 터널내 경로손실은 자유공간에 비하여 안테나에 따라 평균 $4.38^{\sim}14.41dB$가 적고 원편파 안테나의 경로손실이 가장 적다. 또한 곡선구간에서 수신 안테나의 위치가 바깥쪽에 위치할 때 경로손실이 가장 적다. 모든 안테나의 지연성분의 90%가 20ns 이내에 존재하며, 지향성 안테나가 무지향성 안테나보다 더 넓은 코히어런스 대역폭을 갖는다. 측정결과 경로손실과 지연 특성을 고려할 때 지하철 터널에서는 원편파 안테나를 사용하는 것이 적합한 것으로 판단된다.