References
- Predin, A. and Biluŝ I., 2003, "Influence of Additional Inlet Flow on the Prerotation and Performance of Centrifugal Impellers," J. of Hydraulic Research, Vol. 41, No. 2, pp. 207-216. https://doi.org/10.1080/00221680309499962
- Bolpaire S., Barrand J.P., and Caignaert G., 2002, "Experimental study of the flow in the suction pipe of a centrifugal impeller:steady conditions compared with fast start-up," International Journal of Rotating Machinery, 8(3):215-222. https://doi.org/10.1155/S1023621X02000209
- Kikuyama K., Hasegawa H., and Maeda T., 1992, "Unsteady Pressure Change in Centrifugal Pump Impeller Passages due to Inlet Swirl," J. of Fluids and Structures, Vol. 6, pp. 337-351. https://doi.org/10.1016/0889-9746(92)90013-S
- Bwalya A.C. and Johnson M.W., 1996, "Experimental Measurements In A Centrifugal Pump," ASME J. of Fluids Eng., Vol. 116, pp. 692-697.
- Howard J.H.G. and Kittmer C.W., 1975, "Measured Passage Velocities in a Radial Impeller with Shrouded and Unshrouded Configurations," ASME J. of Engineering for Power, pp. 207-213.
- Murakami M., Kikuyama K., and Asakura, 1980, "Velocity and Pressure distributions in the impeller passages of centrifugal pump," ASME J. of Fluids Eng., 102, pp. 420-426. https://doi.org/10.1115/1.3240714
- Hong S.S. and Kang S.H., 2002, "Exit Flow Measurement of a Centrifugal Pump Impeller," KSME International Journal, Vol. 16, No. 9, pp. 1147-1155. https://doi.org/10.1007/BF02984434
- Pedersen N., Larsen P.S. and Jacobsen C.B., 2003, "Flow in a Centrifugal Pump at Design and Off-Design Conditions - Part I: Particle Image Velocimetry (PIV) and Laser Doppler Velocimetry (LDV) Measurement," ASME J. of Fluids Eng., Vol. 125, pp. 61-72. https://doi.org/10.1115/1.1524585
- Liu C.H., Vafidis C., and Whitelaw J.H., 1994, "Flow Characteristics of a Centrifugal Pump," ASME J. of Fluids Eng., Vol. 116, pp. 303-309 https://doi.org/10.1115/1.2910272
- Abramian M. and Howard J.H.G., 1994, "Experimental Investigation of the Steady and Unsteady Relative Flow in a Model Centrifugal Impeller Passage," ASME J. of Fluids Eng., Vol. 116, pp. 269-279.
- Dong R., Chu S., and Katz J., 1992, "Quantitative Visualization of the Flow Within the Volute of a Centrifugal Pump. Part B: Results and Analysis," ASME J. of Fluids Eng., Vol. 114, pp. 396-403. https://doi.org/10.1115/1.2910044
- Chu S., Dong R., and Katz J., 1995, "Relationship Between Unsteady Flow, Pressure Fluctuations, and Noise in a Centrifugal Pump; Part B: Effects of Blade-Tongue Interactions," ASME J. of Fluids Eng., Vol. 177, pp. 30-35.
- Asuaje M., Bakir F., Kergourlay G., Noguera R., and Rey R., 2006, "Three-dimensional Quasi-steady Flow Simulation in a Centrifugal Pump: Comparison with Experiment Results," Proc. IMechE Part A: J. Power and Energy, Vol. 220, pp. 239-256. https://doi.org/10.1243/09576509JPE154
- Feng J.J., Benra F.K., and Dohmen H.J., 2007, "Numerical Investigation on Pressure Fluctuations for Different Configurations of Vaned Diffuser Pumps," International J. of Rotating Machinery, Vol. 2007, Article ID 34752.
- Feng J.J., Benra F.K., and Dohmen H.J., 2009, "Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV Results," International J. of Rotating Machinery, Vol. 2009, Article ID 410838.
- Enayet M. M., Gibson M. M., Taylor A. M. K. P., and Yianneskis M., 1982, "Laser-Doppler measurements of laminar and turbulent flow in a pipe bend," Vol. 3, No. 4, pp. 213-219. https://doi.org/10.1016/0142-727X(82)90024-8
- Azzola J., Humphrey J.A.C., Iacovides H., and Launder B.E., 1986, "Developing Turbulent Flow in a U-Bend of Circular Cross-Section: Measurement and Computation," ASME J. of Fluids Eng., Vol. 108, pp. 214-221. https://doi.org/10.1115/1.3242565
- Elholm T., Ayder E., and Van den Braembussche R.A., 1992, "Experimental Study of the Swirling Flow in Volute of Centrifugal Pump," ASME J. of Turbomachinery, Vol. 114, pp. 366-372 https://doi.org/10.1115/1.2929153
- Stepanoff A.J., 1957, "Centrifugal and Axial Flow Pumps: Theory, Design and Application," 2nd Ed. Krieger, Melbourne, FL.
- Iversen H.W., Rolling R.E., and Carlson J.J., 1960, "Volute Pressure Distribution, Radial Force on the Impeller, and Volute Mixing Losses of a Radial Flow Centrifugal Pump," ASME J. of Eng. For Power, pp. 136-144.
Cited by
- Unsteady Analysis of Impeller-Volute Interaction in Centrifugal Pump vol.4, pp.3, 2011, https://doi.org/10.5293/IJFMS.2011.4.3.349
- Spiral Casing of a Volute Centrifugal Pump - Effects of the Cross Sectional Shape - vol.16, pp.4, 2013, https://doi.org/10.5293/kfma.2013.16.4.028
- Spiral casing of a volute centrifugal pump vol.28, pp.7, 2014, https://doi.org/10.1007/s12206-014-0626-0
- Experimental and numerical investigations of head-flow curve instability of a single-stage centrifugal pump with volute casing vol.230, pp.7, 2016, https://doi.org/10.1177/0957650916663326
- Differential amplification method for flow structures analysis of centrifugal pump between design and off-design points vol.24, pp.6, 2017, https://doi.org/10.1007/s11771-017-3548-z
- Numerical Investigation of Periodic Fluctuations in Energy Efficiency in Centrifugal Pumps at Different Working Points vol.10, pp.3, 2017, https://doi.org/10.3390/en10030342
- Large eddy simulation of energy gradient field in a centrifugal pump impeller pp.2041-2983, 2018, https://doi.org/10.1177/0954406218809127
- Establishing a Relationship between Hydraulic Efficiency and Temperature Rise in Centrifugal Pumps: Experimental Study vol.144, pp.4, 2018, https://doi.org/10.1061/(ASCE)HY.1943-7900.0001442
- Experimental evaluation of temperature rise in centrifugal pumps at partial flow rates vol.40, pp.4, 2018, https://doi.org/10.1007/s40430-018-1078-8