• 한국재료학회지
• /
• 제12권2호
• /
• pp.103-111
• /
• 2002

The thermally insulated underground pipelines have been used for district heating system. The sensor wire embedded in the insulation was used for monitoring the insulating resistance between the sensor wire and the pipe. The resistance measurement system detects corrosion of steel pipe under insulation. The corrosion and stress corrosion cracking(SCC) characteristics of sensor wire in synthetic ground water were investigated using the electrochemical methods and constant load SCC tests. The polarization tests were used to study the electrochemical behavior of sensor wire. The sensor wire was passivated at temperatures ranging from 25 to $95^{\circ}C$. However, the applied sensing current larger than passive current resulted in breakdown of passive film. The constant load SCC tests were performed to investigate the effects of applied current and load on the fracture behavior. Stress-corrosion cracks initiated at pits that were produced by sensing current. The growth of the pit involves a tunnelling mechanism, which leads to ductile fracture.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권4호
• /
• pp.62-70
• /
• 1995

Brushless DC Motor (BDCM) is widely used in the industry such as a variable speed motor in a compressor for room air conditioners, because the motor can be easily controlled and operated over a wide speed range. The system to drive BDCM needs encoder that senses rotor position. Gut in a certain application, the position sensor has to be avoided. In the paper, various position sensorless drive systems for BDCM are investigated and critically evaluated, so that the effective method of sensorless control can be selected. Out of these methods, the freewheeling diode current sensing has many advantages. For example, the simple starting procedure makes it possible to perform sensorless control even in low speed. So the hardware design for this method has been carried out and the system has been implemented using DSP. The experimental results verified that the freewheeling diode current sensing approach has advantages in starting procedure and low speed sensing.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1304-1306
• /
• 2003

The absolute area of wetland accounts for 0.3% of the whole Beijing. We have studied the current environmental situations of Beijing's wetland and the changes in the key wetland supported by Remote Sensing(RS) technology. The result shows that the areas of wetland are reducing year by year and the quality of ecological environment is dropping year by year. At last, we analyze the factors that influence the change of wetland and propose some constructive suggestions according to current problems existing in Beijing's wetland.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.333-341
• /
• 2007

Waveform design method for inkjet printing has been proposed tv pressure wave measurement. The pressure wane inside the inkjet dispenser can be effectively measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially availablelaser vibrometer. In order to obtain high speed inkjet droplets, two pulse waveform was designed such that the pressure wane after droplet formation can be minimized.

• 대한원격탐사학회지
• /
• 제21권4호
• /
• pp.341-369
• /
• 2005

이 연구는 새로운 광학원격탐사자료로 대두되고 있는 초분광영상의 기본적 특성과 용어에 관한 정의를 검토하고, 지금까지 초분광영상과 관련된 주요 처리기법 및 활용분야를 광범위하게 검토하여 국내에서 초분광영상 기술의 활용을 위한 기초 자료를 제공하고자 한다. 먼저 문헌자료와 인터넷 검색을 통하여 항공기 및 위성탑재 센서와 지상용 카메라 등 현존하는 초분광센서의 종류 및 특성을 제시하였다 초분광영상과 관련된 연구 현황을 분석하기 위하여 원격탐사와 관련된 주요 국제학술지와 초분광영상 관련 학술발표회에서 발표된 논문들을 선정하여 센서별, 영상처리기법별, 주요 활용분야별로 나누어 정리하였다. 현재 항공기 및 위성 탑재 초분광영상 센서의 종류가 증가하고 있는 추세지만, 지금까지 초분광영상과 관련된 연구의 주된 부분은 미국 항공우주국에서 개발된 AVIRIS영상자료를 토대로 하고 있다. 기존의 다중분광영상에 보다 많은 분광밴드를 가진 초분광영상의 특성을 최대한 이용할 수 있는 영상처리기법이 개발되고 있다. 대기보정, 분광혼합분석, 특징추출 등이 초분광영상처리와 관련된 중요한 분야로 대두되고 있으나, 아직까지 보편적인 초분광영상 처리기술로 자리 잡기까지는 보다 많은 연구가 필요한 실정이다. 초분광영상이 가지고 있는 분광특성 정보를 최대한 이용하기에 적합한 암석 및 광물탐사가 초기의 주된 활용분야였으나, 식물의 물리화학적 정보 추출, 수질, 군용목표물 탐지 등 초분광영상의 활용은 기존의 다중분광영상의 한계를 극복하는 측면에서 확대될 전망이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.590-593
• /
• 2004

Extraction of ocean surface current velocity offers important physical oceanographic parameters especially on understanding ocean environment. Although Remote Sensing techniques were highly developed, the investigation of ocean surface current using Synthetic Aperture Radar (SAR) is not an easy task. This paper presents the results of ocean surface current observation using Doppler Centroid of ERS-1 SAR data obtained off the coast of Korea peninsula. We employed the concept, in which Doppler frequency shift and the ocean surface current are closely related, to evaluate ocean surface current. Moving targets cause Doppler frequency shift of the back scattered radar waves of SAR, thus the line-of-sight velocity component of the scatters can be evaluated. The Doppler frequency shift can be measured by estimating the difference between Doppler Centroid of raw SAR data and reference Doppler Centroid. Theoretically, the Doppler Centroid is zero; however, squinted antenna which is affected by several physical factors causes Doppler Centroid to be nonzero. The reference Doppler Centroid can be obtained from measurements of sensor trajectory, attitude and Earth model. The estimated Doppler Centroid was compensated by considering the accurate attitude estimation of ERS-1 SAR. We could verify the correspondence between the estimated ocean surface current and observed in-situ data in the error bound.

• 한국위성정보통신학회논문지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2015

최근 제한된 주파수 자원의 효율적인 사용을 위한 인지 무선 기술(CR)이 많은 관심을 받고 있다. CR 기술에서 가장 중요한 부분은 인가 사용자의 통신을 보호 하는 것이다. 따라서 비인가 사용자는 자신이 현재 사용 중인 주파수 대역은 물론 인가 사용자가 나타났을 시에 스위칭 해야 할 후보 채널의 주기적인 센싱도 필요하다. 본 논문에서는 CR 환경에서 인가 사용자를 보호하기 위한 방법으로 비인가 사용자로 하여금 각 노드의 남은 에너지와 센싱 존 이웃이라는 개념을 이용하여 협력적인 채널 센싱을 하도록 제안한다. 채널 센싱은 현재 사용하고 있는 채널을 센싱하는 인밴드센싱과 인가 사용자가 나타났을 경우 스위칭 해야할 후보 채널을 센싱하는 아웃밴드 센싱으로 수행된다. 모의 실험을 통해 제안된 방법이 센싱을 수행하는 노드의 수를 줄임으로 인해 센싱에 필요한 많은 에너지가 절약되고, 남은 노드들의 에너지가 균일해 짐으로써 네트워크의 수명이 길어지는 것을 확인할 수 있다.

• 한국태양에너지학회 논문집
• /
• 제32권spc3호
• /
• pp.255-261
• /
• 2012

Since PV PCS uses output current sensor for ac output current control, the sensor's sensing value includes unnecessary offset inevitably. If PV inverter is controlled by the included offset value, it's output current will generate DC offset. The DC offset of output current for trans-less PV inverter is fatal to grid, which results in saturating grid side transformer. Usually DSP controller of PV inverter reads several times sensing value during initial operation and, finally, it's average value is used for offset calibration. However, if temperature changes, the offset changes, too. And also, the switch device is not ideal, both each switching element of the voltage drop difference and on & off time delay difference generate DC offset. Thus, to compensate for deadtime and the switch voltage drop, feedback control by output current DC offset should be provided to compensate additional distortion of the output current. The validity of the proposed method is confirmed through PSIM simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1257-1262
• /
• 2008

A long-distance remote sensing of temperature and current based on a fiber Bragg grating (FBG) is proposed and demonstrated. The thermal expanding effect of the epoxy and the Er-doped fiber ring laser (EFRL) are applied to the sensor system to enhance the temperature and current sensitivity. An EFRL with a 5 km-single-mode fiber and a FBG shows a high extinction ratio of more than 60 dB and a low power fluctuation of less than 1 dB. The metal wires are used to supply the current to the sensors. When the NOA65 puts on the FBG as a thermal expanding material, the temperature and current sensitivity of the lasing wavelength shift are about $30\;pm/^{\circ}C$ and 3pm/mA, respectively. The proposed sensing scheme is useful for measurement of current or temperature at a distant object of more than several km.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.66-80
• /
• 1997

This paper describes a newly developed arc-sensing algorithm of seam-tracking for FCA W (flux-cored arc welding) horizontal fillet welding. In this algorithm, arc current and the Weighted-Are-Current (WAC) are used to adjust the position of a weld torch in directions of bead throat and weaving, respectively. The WAC, which is newly devised in this study, means that arc current in the vicinity of weaving end is more emphasized than that in the center of weaving. The reason of this is because there usually exists much noise in the center of weaving due to abrupt change of arc length in case some empty gaps exist in a fillet joint Variance analysis was performed in order to check the effect of weld parameters on arc current and the WAC. As a result, the relationships between tip-to-workpiece distance and arc current, and between weaving offset and the WAC were established.To check "the validity of the algorithm, seam-tracking experiments were performed ;mder various welding condition. The result of experiments showed a satisfactory tracking performance in the presence of empty gaps in a horizontal fillet joint.et joint.