Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Waveform Design for Piezo Inkjet via Self- sensing Measurement

셀프 센싱을 이용한 피에조 잉크젯의 파형 설계

  • Published : 2007.04.20
Download PDF
⟨ Previous Next ⟩

Abstract

Waveform design method for inkjet printing has been proposed tv pressure wave measurement. The pressure wane inside the inkjet dispenser can be effectively measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially availablelaser vibrometer. In order to obtain high speed inkjet droplets, two pulse waveform was designed such that the pressure wane after droplet formation can be minimized.

Keywords

References

  1. Kwon, K. S., Shin, S. J. and Kim, S. J., 2005, 'The Opportunity of Printing Technology for Display Manufacturing Process', Proceedings of Colloquium on Micro/Nano Thermal Engineering, Seoul National University
  2. Bale, M., et al, 2006, 'Ink Jet Printing: The Route to Production of Full Color P-OLED Displays', Research Paper, Website: http://www.cdtltd.co.uk
  3. Rhee, J., et al, 2006, 'A 14.1-in Full-color Polymer-LED Display with a-Si TFT Backplane by Ink-jet Printing', SID (society for information display)
  4. Gohda, T., et al., 2006, 'A 3.6-in 202-ppi Full-color AMPLED Display Fabricated by Ink-jet Method', SID
  5. Koo, H. S. et al, 2006, 'Fabrication and Chromatic Characteristics of the Greenish LCD Colour-filter Layer with Nano-particle Ink Using Inkjet Printing Technique', Displays, Vol. 27, pp. 124-129 https://doi.org/10.1016/j.displa.2006.04.001
  6. Creagh, L. T. et al., 2004, 'FPD Manufacturing Conference, Ink Jet Printhead as a precision deposition tool in manufacturing FPDs', SEMICON China
  7. Albertalli, D., 2005, 'Gen 7 FPD Inkjet Equipment Development status', SID
  8. Bogy, D. B. and Talke, F. E., 1984, 'Experimental and Theoretical Study of Wave Propagation Phenomena in Drop-on-demand Ink Jet Devices', IBM Journal of Research and Development, Vol. 28, No. 3, pp. 314-321 https://doi.org/10.1147/rd.283.0314
  9. Microfab technote, 1999, 'Drive Waveform Effects on Ink-jet Device Performance', 99-03
  10. Molesa, S. E., 2006, 'Ultra-low-cost Printed Electronics', Ph.D. Dissertation, University of California, Berkeley
  11. Dong, H. and Morris, J. F., 2006, 'An Experimental Study of Drop-on-demand Drop Formation', AIP, Physics of fluids, Vo. 18, 072102
  12. Szczech, J. B., Gamota, D. R., Zhang, J., 2002, 'Fine-line Conductor Manufacturing Using Drop-on-demand PZT Printing Technology', IEEE Transactions on Electronics Packaging Manufacturing, Vol. 25, No. 1, pp.26-33 https://doi.org/10.1109/TEPM.2002.1000480
  13. Lee, C., Toshihiro, I. and Suga, T., 1999, 'Self-excited Piezoelectric PZT Microcantilevers for Dynamic SFM with Inherent Sensing and Actuating Capabilities', Sensor and Actuators A, Vol. 72, pp. 179-188 https://doi.org/10.1016/S0924-4247(98)00212-X
  14. Giurgiutiu, V. and Zagrai A. N., 2002, 'Embedded Self-sensing Piezoelectric Active Sensors for On-line Structural Identification', Journal of Vibration and Acoustics, ASME, Vol. 124, pp. 116-125 https://doi.org/10.1115/1.1421056
  15. Wassink, M. B. G., Bosch, M. J. M., Bosgra, O. H. and Koekebakker, S., 2005, 'Enabling Higher Jet Frequencies for an Inkjet Printhead Using Iterative Learning Control', Proceedings of the 2005 IEEE Conference on Control Applications, Toronto, Canada, Aug. 28-31
  16. Groninger, M. A., Kruiit, P. G. M., Reinten, H., Schippers, R. H. and Simons, H. M. M., 2003, 'A Method of Controlling an Inkjet Printhead, an Inkjet Printhead Suitable for Use of Said Method, and an Inkjet Printer Comprising Said Printhead', European patent, EP 1 378 360 A1
  17. Horowitz, P. and Hill Windfield, 1989, 'The Art of Electronics', Cambridge University Press
  18. Website: http://www.dimatix.com

Cited by

  1. Optimization of the Excitation signal for a novel piezoelectric micro-jet vol.61, pp.2261-236X, 2016, https://doi.org/10.1051/matecconf/20166101025