• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.390-396
• /
• 2003

As the design rule of device continued to shrink, the contact resistance in small contact size became important. Although the conventional TiN/Ti structure as a ohmic layer has been widely used, we propose a new TiN/Co film structure. We characterized a contact resistance by using a chain pattern and a KELVIN pattern, and a leakage current determined by current-voltage measurements. Moreover, the microstructure of TiN/ Ti/ silicide/n$\^$+/ contact was investigated by a cross-sectional transmission electron microscope (TEM). The contact resistance by the Co ohmic layer showed the decrease of 26 % compared to that of a Ti ohmic layer in the chain resistance, and 50 ％ in KELYIN resistance, respectively. A Co ohmic layer shows enough ohmic behaviors comparable to the Ti ohmic layer, while higher leakage currents in wide area pattern than Ti ohmic layer. We confirmed that an uniform silicide thickness and a good interface roughness were able to be achieved in a CoSi$_2$ Process formed on a n$\^$+/ silicon junction from TEM images.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.150-158
• /
• 2017

This study proposes a new pulse-width modulation switching pattern for the low conduction loss of a three-level neutral point clamped (NPC)-based dual-active bridge (DAB) converter. The operational principle for a bidirectional power conversion is a phase-shift modulation. The conventional switching method of the three-level NPC-based DAB converter shows a symmetric switching pattern. This method has a disadvantage of high root-mean-square (RMS) value of the coupling inductor current, which leads to high conduction loss. The proposed switching method shows an asymmetrical pattern, which can reduce the RMS value of the inductor current with lower conduction loss than that of the conventional method. The performance of the proposed asymmetrical switching method is theoretically analyzed and practically verified using simulation and experiment.

• ALGAE
• /
• 제36권1호
• /
• pp.13-24
• /
• 2021

The present-day genetic structure of macroalgal species reflects both geographical history and oceanic circulation patterns as well as anthropogenic introduction across native ranges. To precisely understand the genetic diversity and how the factors shape the current population structure of Gloiopeltis furcata sensu lato, we determined the mitochondrial 5' end of cytochrome c oxidase subunit I (COI-5P) sequences for 677 individuals sampled from 67 sites spanning almost the entire distribution range in Korea and Japan. Results from the phylogenetic analysis and haplotype distribution revealed eleven distinct lineages within G. furcata s.l. along the Korea-Japan coastal areas and displayed divergent phylogeographic patterns among lineages. Despite the closely related lineages distributed in same habitats as high rocky intertidal zone, they display different phylogeographic patterns among lineages. The populations from the south of Korea-Japan harbored the highest genetic diversity and unique endemism in comparison with other populations in the distribution range. This could be the evidence of southern refugia for G. furcata s.l. in the Northwest (NW) Pacific and the recent migration from native to introduced region. The reason is that an exceptional distribution pattern was found high genetic diversity in Hakodate of Japan where is the northern location in the NW Pacific. Our results imply the contemporary influence on the distribution due to current circulation pattern and anthropogenic effects. These phylogeographic findings provide the important insight into cryptic species diversity and the detailed distribution pattern of Gloiopeltis in the NW Pacific.

• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.49-54
• /
• 2022

반도체 Si 웨이퍼 Cu 배선을 제작하는데 사용하는 submicron 크기의 다마신 패턴의 구리 도금공정을 동일한 조건의 유기첨가제 및 전류밀도 조건을 사용하여 PCB 금속배선에 사용되는 수십 micron 크기의 패턴 도금에 적용하였다. PCB 패턴의 종횡비가 작아 쉽게 채워질 것으로 기대했던 것과는 달리, 이 경우 패턴 내부에 위치별 도금 두께 불균일도가 심화되는 것이 관찰되었다. 이러한 원인을 정량적으로 분석하기 위해 유동 및 전기장을 고려한 전기화학적 해석을 진행하였으며, 이를 통해 패턴 바닥부 코너에서 측벽과 바닥부의 도금에 의한 용액내 Cu²⁺ 이온의 고갈이 상대적으로 패턴 상부보다 빠르게 일어나는 것이 확인되었다. 이는 Cu²⁺ 이온의 확산계수가 2.65×10^-10 m²/s 로 초당 16.3 ㎛정도의 평균 이동거리를 가짐으로, 이 값이 다마신 패턴에서는 충분히 커서 원활하게 패턴 내부까지 이온 공급이 이루어지나, 수십 micron 크기를 갖는 PCB 크기에서는 소진된 구리이온을 보충해 주기 위해 충분한 시간이 필요하기 때문인 것으로 확인되었다. 구리 이온을 충분히 공급해 주기 위해 전류밀도를 낮춰 Cu²⁺ 이온이 확산할 수 있는 충분한 시간을 할애해 줌으로써 두께 균일도가 향상되는 것을 알 수 있었다.

• Ocean and Polar Research
• /
• 제33권3호
• /
• pp.309-319
• /
• 2011

This is a preliminary study of the feasibility of obtaining reliable tidal current harmonic constants, using one month of current observations, to verify the accuracy of a tidal model. An inference method is commonly used to separate out the tidal harmonic constituents when the available data spans less than a synodic period. In contrast to tidal constituents, studies of the separation of tidal-current harmonics are rare, basically due to a dearth of the long-term observation data needed for such experiments. We conducted concurrent and monthly harmonic analyses for tidal current velocities and heights, using 2 years (2006 and 2007) of current and sea-level records obtained from the Tidal Current Signal Station located in the narrow waterway in front of Incheon Lock, Korea. Firstly, the l-year harmonic analyses showed that, with the exception of $M_2$ and $S_2$ semidiurnal constituents, the major constituents were different for the tidal currents and heights. $K_1$, for instance, was found to be the 4th major tidal constituent but not an important tidal current constituent. Secondly, we examined monthly variation in the amplitudes and phase-lags of the $S_2$ and $K_1$ current-velocity and tide constituents over a 23-month period. The resultant patterns of variation in the amplitudes and phase-lags of the $S_2$ tidal currents and tides were similar, exhibiting a sine curve form with a 6-month period. Similarly, variation in the $K_1$ tidal constant and tidal current-velocity phase lags showed a sine curve pattern with a 6-month period. However, that of the $K_1$ tidal current-velocity amplitude showed a somewhat irregular sine curve pattern. Lastly, we investigated and tested the inference methods available for separating the $K_2$ and $S_2$ current-velocity constituents via monthly harmonic analysis. We compared the effects of reduction in monthly variability in tidal harmonic constants of the $S_2$ current-velocity constituent using three different inference methods and that of Schureman (1976). Specifically, to separate out the two constituents ($S_2$ and $K_2$), we used three different inference parameter (i.e. amplitude ratio and phase-lag diggerence) values derived from the 1-year harmonic analyses of current-velocities and tidal heights at (near) the short-term observation station and from tidal potential (TP), together with Schureman's (1976) inference (SI). Results from these four different methods reveal that TP and SI are satisfactorily applicable where results of long-term harmonic analysis are not available. We also discussed how to further reduce the monthly variability in $S_2$ tidal current-velocity constants.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2002년도 Language, Information, and Computation Proceedings of The 16th Pacific Asia Conference
• /
• pp.157-165
• /
• 2002

This paper describes our ongoing Korean-Chinese machine translation system, which is based on verb patterns. A verb pattern consists of a source language pattern part for analysis and a target language pattern part for generation. Knowledge description on lexical level makes it easy to achieve accurate analyses and natural, correct generation. These features are very important and effective in machine translation between languages with quite different linguistic structures including Korean and Chinese. We performed a preliminary evaluation of our current system and reported the result in the paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2075-2076
• /
• 2011

The stator winding faults diagnosis technique based on MCSA is as follows. Firstly, collecting the 3 phase motor currents, that signal is transformed by (d-q transform, $i_d$, $i_q$). Park's vector pattern, the circle that is down by d-q transformed currents($i_d$, $i_q$). The circle is widely used for stator winding faults detection. The current distortion ratio(DR), defined by the ratio of max-axis and min-axis of ellipse of Park's vector's pattern. In this study, distortion ratio of Park's vector pattern is suggested for Auto diagnosis of stator winding short fault and usefulness of distortion ratio is verified through simulation using LabVIEW program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.29-31
• /
• 1993

This paper presents Neural Network(NN) approach to short-term load forecasting. Input to the NN are past loads and the output is the predicted load for a given day. The NN is used to learn the relationship among past, current and future temperature and loads. Three different cases are presented. Case 1 divides into weekday and weekendday load pattern. Case 2 forcasts 24-hour ahead load. Case 3 searchs for the same load pattern as present load pattern in past load pattern. From result of forecasting, an average absolute percentage errors of case 1 shows 2.0%. That of case 2 shows 2.2, and That of case 3 shows 1.6%.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.322.2-322
• /
• 2002

Vibration table is required to obtain high packing density in lost form casting process. Packing density, which is important manufacture factor, depends on the vibration pattern induced by vibration table. In general, circular vibration pattern is recognized as the best pattern. The existing vibration table is investigated to identify current vibration pattern and consider a countermeasure. Modal test is utilized to identify the dynamic characteristics of vibration table, and finite element method is used to present the improved design

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.747-753
• /
• 2018

Currently, many companies have succeeded in logistics delivery experiments utilizing drone and report it. When a drone is used commercially, long-term flight is an important performance that a drone should have. However, unlike vehicles operated on the ground, drone is a vehicle that continues to consume energy when maintaining the current altitude or moving to the destination. Therefore, the drones can fly for a long time as the capacity of the battery is large, but the batteries with large capacity are restricted by heavy weight and it acts as a limiting factor in a commercial use. To address this issue, we attempt to compare how far we can fly than forward flight based on the flight pattern with the same energy consumption condition. In this paper, the comparison of energy consumption was performed in three flight pattern, forward flight without altitude change and forward flight with altitude change, by computer simulation and it shows the increasing of flight distances when the quadrotor fly with altitude change from high altitude to low altitude.