• Title/Summary/Keyword: current pattern

Search Result 2,157, Processing Time 0.032 seconds

An Improved Current Control Method for Three-Phase PWM Inverters Using Three-Level Comparator (3레벨 비교기를 이용한 3상인버터의 개선된 히스테리시스 전류제어 기법)

  • Moon, Hyoung-Soo;Han, Woo-Yong;Lee, Chang-Goo;Sin, Dong-Yong;Kim, Mu-Youn
    • Proceedings of the KIEE Conference
    • /
    • 2001.07b
    • /
    • pp.1035-1037
    • /
    • 2001
  • This paper presents an improved hys- teresis current control method for three-phase PWM power inverters using 3-level comparator. Hysteresis current controller using 3-level comparator has an advantage of constant switching frequency compared with conventional hysteresis current controller. However, this method has disadvantage that the longer sampling period, the larger current error because the switching is performed without considering current error magnitude of each phase. The proposed method improves the control performance by selecting the optimum switching pattern in which the magnitudes of current errors are considered introducing space vector concept. Simulation results using Matlab/Simulink show that the proposed control method reduces current error keeping the merit of previous hysteresis current control method.

  • PDF

Optical Characterization of Superconducting Strip Photon Detector Using $MgB_2$

  • Shibata, H.
    • Progress in Superconductivity
    • /
    • v.14 no.2
    • /
    • pp.96-98
    • /
    • 2012
  • Bias current dependence of a superconducting strip photon detector is studied in the wavelength range of 405 to 1310 nm. The detector is made of an $MgB_2$ meander pattern with the line width of 135 nm and thickness of 10 nm. At 1310 nm, the detection efficiency exponentially decreases as the bias current decreases. While at 405 nm, the detection efficiency almost saturates in the high bias current region. These features suggest that the intrinsic detection efficiency of the $MgB_2$ detector is high at 405 nm.

Analysis of Multi Level Current Source GTO Inverter for Induction Motor Drives

  • Arase, Takayuki;Matususe, Kouki
    • Proceedings of the KIPE Conference
    • /
    • 1998.10a
    • /
    • pp.535-540
    • /
    • 1998
  • This paper discusses a triple stage current source GTO inverter system for high power motor drives. The energy rebound circuit of the triple stage inverter not only controls the spike voltage of the GTO inverter but also facilitates PWM control of the thyristor rectifier operated at unity fundamental input power factor. Based on Pspice simulation and experiments, the principles and PWM pulse pattern for removing specific lower harmonics in the inverter's output current are discussed in detail.

  • PDF

Magnetic Substance Search Using Finite Element Method and Neural Network (유한요소법과 인공지능을 이용할 자성체 탐사)

  • Lee, Kang-Woo;Park, Il-Han
    • Proceedings of the KIEE Conference
    • /
    • 1997.07a
    • /
    • pp.198-200
    • /
    • 1997
  • This paper consider a simple Nondestructive Testing(NDT) having eddy currnt effect. We analyzed the two dimension modeling of alternative magnetic field. eddy current with voltage source. And, the current magnitude and phase data obtained from each different frequency five object position is used for learning the neural network. Therefore, we can recognize an object position pattern from new input current magnitude, phase data.

  • PDF

Characteristic Analysis of Permanent-Magnet Linear Eddy-Current Brake System According to Magnetization Pattern (자화패턴에 따른 영구자석 직선형 와전류 제동장치의 특성 해석)

  • 이성호;조한욱;장석명
    • The Transactions of the Korean Institute of Electrical Engineers B
    • /
    • v.52 no.9
    • /
    • pp.427-433
    • /
    • 2003
  • Permanent magnet movers with three different magnetization patterns were applied to a linear eddy current braking system. By using a two-dimensional analytical technique, this paper deals with the comparison of the design guidelines, magnetic field, required magnet volume, and force capability for three types of linear brakes. The analytical results are also verified by finite element analyses.

Vector Controlled Induction Motor Drives Fed by PWM CSI Using Space Current Vectors (공간 전류벡터를 이용한 PWM CSI 구동 유도전동기의 벡터제어)

  • Lee, Dong-Choon;Ko, Sung-Beom;Ro, Chae-Gyun
    • Proceedings of the KIEE Conference
    • /
    • 1995.07a
    • /
    • pp.357-359
    • /
    • 1995
  • In this paper, vector control of induction motor drives using space current vector PWM is presented. The scheme gives advantages, besides robustness to inverter arm-shoot, sinusoidal input current and voltage for induction motors. In addition, space vector PWM for CSI produces faster transient response than conventional pattern PWM. Also, a modulation index control is proposed.

  • PDF

A Study on the Rotary Tidal Current in the East China Sea (동지나해 어장의 회전 조류에 관하여)

  • 김진건
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.22 no.2
    • /
    • pp.1-6
    • /
    • 1986
  • Even though it is well known that the tidal current in the East China Sea rotates clockwise, few report can be found about the precise pattern of it. To furnish some information available for the stow net fishermen, the author carried out the observation over 235 semidiurnal tidal cycle to investigate the pattern of the set and the rate of tidal current in the Korean fishing section 250 and 494, by reading the current meter and by tracing the corner reflectors with radar onboard the anchored obsen'ation vessel, from May 12, 1984 through February 27, 1986. The results obtained are as follows: 1. The mean semidiurnal tidal cycle was 12 h 20 m during spring tide, and 12 h 30 m during neap tide. 2. The mean interval from the calculated time of high water until the current began to set north was 2 h 30 m and 2 h 15 m in the fishing section 250 and 494 respectively, and the mean interval from the time of low water current began to set south was about 2 h 0 m in both sections. 3. In comparison of the occupied times to vary the set from one of 8 principal bearing points to the neighboring one, the shortest was while the set varied from N to NE and S to SW in the section 250 and 494 respectively. Contrary the longest was while the set varied from SE to S and from W to NW in the section 250 and 494 respectively. 4. In comparison of the rate while the set varied from one of 8 principal bearing points to the neighboring one, the fastest was while the set varied from SE to Sand NW to N in the section 250, and E to SE and W to NW in the section 494. Contrary the slowest was while the current set to NE and S W in the section 250, and N, NE and S W in the section 494.

  • PDF

The Analysis of Relation between Cigarette Smoking and Stroke; case-control study (흡연과 중풍발생의 상관관계에 관한 환자-대조군 연구)

  • 양대진;배종면;이경섭;조기호;김영석;배형섭
    • The Journal of Korean Medicine
    • /
    • v.22 no.4
    • /
    • pp.69-78
    • /
    • 2001
  • Objectives : It is known that cigarette smoking is associated with increased risk of both thrombotic and hemorrhagic stroke. However, in Korea, especially in the academic world of Korean Medicine, there is a lack of study about the relation between cigarette smoking and stroke. We carried out a case-control study to clarify the relation between cigarette smoking and stroke. Method : We interviewed 441 stroke patients (236 men, 205 women) as a case group and 432 non-stroke patients (208 men, 224 women) as a control group. We investigated the smoking pattern of all patients and stroke-subtype of the case group. Smoking pattern is classed into two (Class I), four (Class II) and five groups (Class III). Class I consists of current non-smokers and current smokers. Class II consists of non-smokers, former smokers, current light smokers and current heavy smokers. Class III consists of never smoked, secondhand smokers, former smokers, Current light smokers and current heavy smokers. Stroke-subtype consists of cerebral infarction and cerebral hemorrhage. Results : The percentage of current smokers of case group is higher significantly than that of control group. The number of cigarettes smoked per day is associated positively with the risk of stroke. According to our study, generally cigarette smoking is related with ischemic stroke. The percentage of secondhand smokers of the case group is lower than that of the control group. According to our study, characteristically secondhand smoking is associated with hemorrhagic stroke. Conclusions : From the above results we found that cigarette smoking is an important risk factor of stroke - especially cerebral infarction - and the number of cigarettes smoked per day is associated positively with the risk of stroke. Characteristically according to our study, secondhand smoking is associated with hemorrhagic stroke. Overall we conclude that cigarette smoking may be an important preventable factor for stroke.

  • PDF

Impedence Analysis of Planar Air Core Inductor (공심 평면인덕터의 임피던스 해석)

  • 김영학;송재성
    • Journal of the Korean Magnetics Society
    • /
    • v.6 no.3
    • /
    • pp.179-188
    • /
    • 1996
  • This paper discussed on the impedance analysis of the planar air core inductors having spiral pattern and meander pattern. The width and distance of conductor, and number of turns were varied. As the width of conductor increased, both resistance and inductance decreased and there existed an maximum value in Q for spiral pattern. But Q increased with increasing width of conductor in meander pattern. In spiral pattern, there existed a distance between conductors where inductance became constant and Q became maximum, while the distance between conductors must be as large as possible to obtain large Q because the mutual inductance of meander pattern inductor has negative sign due to opposite current direction at adjacent conductor. Resistance and inductance increased with increasing the number of turns. There existed maximum Q at certain number of turns in spiral pattern. But Q became small in the meander pattern because increase of resistance was larger than increase of inductance with increasing number of turns.

  • PDF

A Study on the Status of Work and Education of Modelists (모델리스트의 업무 및 교육 실태에 관한 연구)

  • Park, Sung Mi;Choi, Young Lim
    • Fashion & Textile Research Journal
    • /
    • v.24 no.2
    • /
    • pp.241-248
    • /
    • 2022
  • This study aims to provide basic data to suggest guidelines for re-education and work improvement of modelists based on the analysis of the current status of modelist work and education. A survey was conducted from January 4 to May 15, 2020, targeting 44 people working in pattern, pattern CAD, and grading in domestic apparel companies. Descriptive statistical analysis and frequency analysis using SPSS 25 were employed to analyze the status of work type, work difficulties, and re-education. For pattern production, the rate of using pattern CAD for business was high. It was found that companies mainly use YUKA CAD (63.8%), and branded companies use pattern CAD (100%). It was found that 3D CAD is mostly employed by vendors (88.9%), and CLO (90%) is mainly used. Regarding difficulties in pattern making, it was found that they experienced difficulties with stretchable materials owing to the amount of shrinkage and sagging of the fabric. The work problem was the lack of requisite working hours owing to the volume of work. Regarding future re-education, 63.6% of the total respondents indicated that they required a course related to pattern correction and material. Moreover, it was found that re-education was necessary to upgrade technology and acquire new knowledge, however, information on re-education was insufficient.