• 컴퓨터교육학회논문지
• /
• 제5권4호
• /
• pp.79-89
• /
• 2002

기존의 고정 단발기 (PC)에서만 주로 행해지던 각종 다중 사용자 접속 온라인 응용이 최근 PC와 PDA, 휴대폰 등이 공동 작업을 수행하는 멀티 플랫폼 기반 온라인 응용으로 전환되고 있다. 그러나 지금까지 멀티 플랫폼 기반 온라인 응용은 다중 사용자의 공동 데이터의 동시 접근 및 각 클라이언트의 처리 능력과 통신 속도의 비대칭을 고려하지 않아 컨텐츠가 매우 단순한 실정이다. 이 논문에서는 멀티 플랫폼 기반 동시성 제어 기법, 다양한 클라이언트간의 변경 전파 프로토콜, 모바일 클라이언트의 특성을 고려한 객체 관리 기술을 제안하였다. 그리고 멀티 플랫폼 기반 채팅 프로그램을 제작하여 제안한 기법들이 적절히 동작함을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1192-1194
• /
• 1999

Recently, there has been growing interest in utilizing cogeneration(COGN) system which has high energy efficiency due to the lacking of energy resource, but insertion of cogeneration system into existing power distribution system can cause several problems such as voltage variations, reenergizing of feeder isolated by fault, increasing fault current because of reverse power of COGN. Also these problems increase the complexity of control, protection, and maintenance of power distribution systems. Hence, some problems according to COGN interconnection operation to power distribution system must be taken into account so that operation and security of power distribution system is not disturbed. This paper deals with momentary voltage variations and fault analysis caused by interconnection operation of COGN.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.86-91
• /
• 2010

Among various fuel cells, solid oxide fuel cells (SOFCs) offer the highest energy efficiency, when taking into account the thermal recycling of waste heat at high temperature. However, the highest efficiency and lowest pollution for a SOFC can be achieved through the sophisticated control of its constituent components such as electrodes, electrolytes, interconnects and sealing materials. The electrochemical conversion efficiency of a SOFC is particularly dependent upon the performance of its electrode materials. The electrode materials should meet highly stringent requirements to optimize cell performance. In particular, both mass and charge transport should easily occur simultaneously through the electrode structure. Matter transport or charge transport is critically related to the configuration and spatial disposition of the three constituent phases of a composite electrode, which are the ionic conducting phase, electronic conducting phase, and the pores. The current work places special emphasis on the quantification of this complex microstructure of composite electrodes. Digitized images are exploited in order to obtain the quantitative microstructural information, i.e., the size distributions and interconnectivities of each constituent component. This work reports regarding zirconia-based composite electrodes.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.601-610
• /
• 2016

The light-emitting diode (LED) has been used in a variety of industrial fields and for general 0lighting purposes on account of its high efficiency, low power consumption and long lifespan. The LED is driven by direct current; therefore, an AC/DC converter is typically required for its use. An electrolytic capacitor is generally used for stabilizing DC voltage during use of the AC/DC converter. However, this capacitor has a short lifespan, which makes it a limiting factor in LED lighting. Furthermore, LED lighting requires a dimmable control to enable energy savings and fulfil a growing consumer demand. In this paper, the dimmable single-stage power factor correction (PFC) continuous conduction mode (CCM) flyback converter that employs no electrolytic capacitor is presented. The LC resonant filter is alternatively applied to reduce the 120[Hz] ripple on the output. And the optimum value of the LC resonant filter parameters considering both efficient and performance is analysed. Simulation and experimental results verify the satisfactory operation of the converter.

• 한국보건간호학회지
• /
• 제24권1호
• /
• pp.105-114
• /
• 2010

Purpose: To investigate the effect of smoking cessation expectation and on the stress for subjects in smoking cessation clinic and effect of self-efficacy in the relationship between expectancy and stress, with the aim of establishing an effective management smoking cessation strategy. Methods: Current smokers (n=161) >30-years-of-age who were residents of G city completed a questionnaire. Results: Concerning the effect of self-efficacy and the expectancy on stress, they were significantly effective in first, second and third stage, and appeared 8.3% in first stage, 13.8% in third stage, showing self-efficacy has a controlling effect on stress. Conclusion: Smoking cessation expectancy and self-efficacy significantly influence stress, and must be taken into account in development of smoking-cessation strategies and programs.

• 한국분무공학회지
• /
• 제11권2호
• /
• pp.89-97
• /
• 2006

An inviscid axisymmetric model capable of predicting droplet bouncing and the detailed pre-impact motion, influenced by the ambient pressure, has been developed using boundary element method (BEM). Because most droplet impact simulations of previous studies assumed that a droplet was already in contact with the impacting substrate at the simulation start, the previous simulations could not accurately describe the effect of the gas compressed between a failing droplet and the impacting substrate. To properly account for the surrounding gas effect, an effect is made to release a droplet from a certain height. High gas pressures are computationally observed in the region between the droplet and the impact surface at instances just prior to impact. The current simulation shows that the droplet retains its spherical shape when the surface tension energy is dominant over the dissipative energy. When increasing the Weber number, the droplet surface structure is highly deformed due to the appearance of the capillary waves and, consequently, a pyramidal surface structure is formed; this phenomenon was verified with our experiment. Parametric studies using our model include the pre-impact behavior which varies as a function of the Weber number and the surrounding gas pressure.

• 한국직업건강간호학회지
• /
• 제16권1호
• /
• pp.58-66
• /
• 2007

Purpose: A national long-term care system for elderly and the disabled has its unique evolution in each country. Japan, Germany and the United States may be the typical examples of respective social insurance system. This paper reviews the counterpart examples of Japan, Germany and the United States and looks at their accumulated long-term care system experiences and personal care system under workers' compensation. Methods: Literature review and website searching were conducted. Key words as 'workers' compensation insurance', 'personal care benefit' and 'long term care' were used in searching the related literatures. Results: Though the personal care benefit under current Workers'Compensation in Korea is very similar to Japan's, the long-term care system of Korea is not as well established. Germany and the United States have the provision of personal care benefit for injured workers within long term care system. Conclusions: We recommend some key issues to take into account for improving personal care benefit system in workers' compensation in Korea as follows: providing a comprehensive coverage through the linkage of long term care, introducing an assessment & evaluation system for the appropriate benefits, establishing insurer's role for quality management of personal care service, and developing a policy for family caregivers.

• 대한전자공학회논문지
• /
• 제26권5호
• /
• pp.60-70
• /
• 1989

본 연구는 인버터로 구동되는 유도전동기에서 발생되는 토오크 맥동을 표현하는, 고조파 토오크 함수 HTF(harmonic torque function)를 제안하고, 컴퓨터 시뮬레이션과 실험을 통하여 HTF의 타당성을 입증하였다. 제안된 HTF는 고조파 전류의 크기 뿐만 아니라 위상까지 고려하므로서 부하변동에 무관한 고조파 토오크 함수가 되었으며, 이를 six-step. SPWM 및 TPWM의 펄스 폭 제어 인버터에 적용하여 비교하였다. 그 결과 PAWM 인버터에서의 우수한 제어방법이 선택되었다. 한 주기당 펄스수가 9이하에서는 six-step이, 출력전압 크기와 토오크 맥동의 측면에서, SPWM 및 TPWM보다 우수함을 알 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.213-225
• /
• 2002

Metal-Ferroelectric- Insulator- Silicon (MFIS) structured field effect transistor (FET) device was fabricated and characterized. Important issues to realize ferroelectric gate field effect transistor device were summarized in three sections. The choice of interlayer dielectric was made in the consideration of device functionality and chemical reaction between ferroelectric materials and silicon surface during fabrication process. Also, various ferroelectric thin film materials were taken into account to meet desired memory window and process compatibility. Finally, MFIS structured FET device was fabricated and important characteristics were discussed. For feasible integration of current device as random access memory array cell address schemes were also suggested.

• 전자공학회논문지D
• /
• 제36D권4호
• /
• pp.77-85
• /
• 1999

본 논문은 진성영역에서 공핍증 폭이 선형적으로 변화한다는 가정을 도입하고 전자이동도의 수평 및 수직 전계 이존성을 고려하여 단채널 MOSFET의 {{{{ { I-V }_{ } }}}} 특성에 대한 해석적 모형을 제시하였다. 이 모형으로부터 전 동작영역에 걸쳐 적용되는 문턱전압 방정식과 드레인전류 방정식을 도출하였다. 본 모형의 타당성을 검토하기 위하여 위 식들의 계산을 수행하였고, 그 결과 채널길이가 짧아짐에 따라 문턱전압이 지수함수적으로 감소하였으며, 아울러 채널길이변조, 채널이동로 열화 등을 본 모형에 의하여 일괄적으로 설명할 수 있었다.