• 생약학회지
• /
• 제40권3호
• /
• pp.173-177
• /
• 2009

The in vitro antibacterial activities of honeybee(Apis mellifera. L) venom collected by a bee venom collector were investigated against several bacteria including antibiotic-susceptible and resistant Propionibacterium acnes. Honeybee venom was prepared with different concentrations and they showed strong antibacterial activites. Honeybee venom inhibited the growth of the tested antibiotic-resistant P. acnes at the concentration of 1 mg/ml. The inhibitory activities of the honeybee venom showed time-dependent manner. Honeybee venom did not influence the viability of human dermal fibroblast at the high concentration of less than 10 mg/ml. From these results, we expect that honeybee venom has strong antibacterial activities and has advantage for treating cure.

• BMB Reports
• /
• 제34권5호
• /
• pp.463-471
• /
• 2001

The bark of Ulmus darvidiana var. japonica Nakai (UDN) has been used for a long time to cure inflammation in oriental medicine. In the present study, two types of extracts, Ulmus water-eluted fraction (UWF) and Ulmus ethanol-eluted fraction (UEF), were prepared from the UDN stem bark, and employed to test the extracts to see if they had anti-oxidative properties against hydroxyl radicals that could alter immune reactivity in mouse immune cells. Deoxyribose assay, DNA nicking assay, and glucose/glucose oxidase assay showed that both fractions had scavenging activity against oxygen free radicals at 50 mg/ml. In addition, hydroxyl radical-mediated apoptosis in mouse thymocytes was not protected by UEF treatment, but the apoptosis was protected by UWF at the same concentration. DNA synthesis and cytokine production that were induced in splenocytes by mitogens (Concanavalin A and lipopolysaccharide) were reduced by the addition of both fractions. These results indicate that both extracts that were prepared from the UDN stem bark have anti-oxidative activities, anti-apoptotic effects, and inhibitory effects on DNA synthesis and cytokine production in mouse immune cell cultures.

• Composites Research
• /
• 제27권6호
• /
• pp.236-241
• /
• 2014

본 연구에서는 공항 포장용 유지보수 재료로 사용되는 폴리머 콘크리트의 자외선 노출에 대한 기계적 물성 변화를 확인하기 위해 자외선 노출 전/후 시편의 압축강도 및 연성인자의 변화를 평가하였다. 현재 공항 포장용으로 사용되는 폴리머 콘크리트의 비율과 선행연구를 통해 얻은 최적 배합비율을 참고하여 시편을 제작하였다. 자외선 발생 램프의 출력을 고려하여 자연상태에서 노출되는 등가시간을 계산한 후 최대 3년에 해당하는 시간만큼의 등가시간 동안 시편을 노출시켰다. 실험결과, 자외선 노출 자체는 재료물성에 거의 영향을 주지 않았으며, 자외선 노출에 따른 온도상승에 의한 재료물성 변화가 주로 관찰되었다. 자외선에 의해 발생된 열에 노출된 후 모든 시편에서 인성은 감소하고, 압축강도는 증가하는 경향을 나타내었다.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.345-350
• /
• 2011

Antioxidant agent, 1,1,3-tris(2-methyl-4-hydroxy-5-tert-butylphenyl)butane were prepared and investigated the antioxidant activity on recycled rubber mat manufactured with waste tire powder. Mechanical properties of rubber mat are influenced by many factor such as compounding ingredients and state of cure, process of rubber, and fillers. Our study aim is to investigate influence of antioxidant activities on ozone cracking and the thermal aging time. In this work, the degradation of recycled rubber mat was studied and suggested mechanism to involve two-type of degradation, thermal aging and cracking both of which can be contained antioxidant or non-antioxidant agent.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.57-62
• /
• 2020

Concrete pump cars are a type of construction equipment that continuously supplies concrete using hydraulic pressure. When manually casting concrete, there may be a problem in the final quality of the concrete due to differences in the degree of cure between the pre-poured and subsequent concretes. Concrete pump cars are the most efficient machines to supply concrete in the shortest time; however, it is difficult to calculate their margin of safety during operation. In this paper, we verified the structural safety of the concrete pump car using a static/dynamic analysis at various position angles. Next, these results were compared with experimental results; strains using strain gages were compared with the strains measured using FEM software to verify the static analysis. In addition, the maximum displacement during the pumping was measured and it was used for fatigue analysis to evaluate the dynamic structural safety.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.29-37
• /
• 2018

Cotton has no adsorption ability for the cationic dye and heavy metal but, if anionized cotton can be made, it will be possible. In this study, to enable the anionisation of cotton fabric, it was modified using sodium vinylsolfonate(SV) as the anionisation reagent, employing a pad-dry-cure(PDC) technique. The effects of curing time, treatment concentrations of urea, sodium hydroxide and SV on the weight increase were experimented and then, the physical characterizations of sulfoethyl cotton(SEC) depending on the finishing conditions were estimated, thus the application possibility of SV as anionisation reagent was investigated. It was not much changed by anionisation except wrinkle recovery. And the structure of SEC was elucidated by Raman and NMR spectoscopy. The feasibility of using Raman and NMR spectroscopy with the band at $1,043cm^{-1}$, and 50.5ppm, respectively as marker band to determine sulfoethyl group of SEC was reported. The total degree of SV substitution(DSV) was determined via elemental analysis. SEC with diverse total DSV up to 0.066 was obtained. In the thermal decomposition(pyrolysis) by DSC, it can be found that the pyrolysis temperature was about $30^{\circ}C$ lower than that of non-treated cotton fabric.

• Korea-Australia Rheology Journal
• /
• 제20권3호
• /
• pp.165-173
• /
• 2008

Multiple particle tracking microrheology is used to characterize the viscoelastic properties of biomaterial and synthetic polymer gels near the liquid-solid transition. Probe particles are dispersed in the gel precursors, and their dynamics are measured as a function of the extent of reaction during gel formation. We interpret the dynamics using the generalized Stokes-Einstein relationship (GSER), using a form of the GSER that emphasizes the relationship between the probe particle mean-squared displacement and the material creep compliance. We show that long-standing concepts in gel bulk rheology are applicable to microrheological data, including time-cure superposition to identify the gel point and critical scaling exponents, and the power-law behavior of incipient network's viscoelastic response. These experiments provide valuable insight into the rheology, structure, and kinetics of gelling materials, and are especially powerful for studying the weak incipient networks of dilute gelators, as well as scarce materials, due to the small sample size requirements and rapid data acquisition.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.25-34
• /
• 2017

PURPOSES: The purpose of this paper is to evaluate interface performance while using various tack coat materials for asphalt overlay. METHODS : The evaluation was conducted with tracking test, permeability, and interface bond strength. Tracking test was conducted using an image processing technique, to investigate the susceptibility of the tack coat materials. BBS and pull-off test were conducted to evaluate bond strength. The permeability test was conducted to evaluate the effect of tack coat materials. RESULTS : Results reveal that the trackless tack coat material demonstrates less tracking compared to other materials. Moreover, both BBS and pull-off tests can effectively evaluate the bond strength at the interface. RSC-4 was measured less bond strength. Moreover, tack coat prevents water penetration through the surface and aids the extension of the surface life of asphalt pavement. CONCLUSIONS : Trackless tack coat demonstrated a high and consistent bond strength performance. The tack coat types demonstrate marginally different performance as function of curing times. Field applicability was tested based on visual observation. Therefore, these should be considered when trackless tack coat is slightly enhanced the pavement performance based on limited this study results. Finally, it is necessary to allow reasonable time for the tack coat to completely cure.

• 동의생리병리학회지
• /
• 제18권1호
• /
• pp.39-49
• /
• 2004

This article will introduce the changes of the historiography of the Chinese medicine which have been made during the last several decades. These will be described with the changes in the image of the Chinese medicine that has been occupied in our mind. We regard Chinese medicine as a rational knowledge system which is based on the theory of Yin-Yang and Five phases. Therefore we draw a dear line of demarcation between Chinese medicine and irrational cure means such as religious prayer, charms and folk remedies which have no theoretical background. We also think the medical lineages continue virtually uninterrupted over the whole time of the history of Chinese medicine that began from Huangdineijing(皇帝內徑) and Shanghanlun(傷寒論). And we consider Chinese medicine as a sort of science, and suppose there has been one universal and homogeneous medical system in the mainland China. This image, however, has been changing rapidly. These changes come from the join of externalists who were trained as historian not physician, for studying the history of Chinese medicine, and the methodological innovations of historiography which was influenced by the methodologies of anthropology, social history, cultural history and the discourse of postmodemism.

• 한국염색가공학회지
• /
• 제9권2호
• /
• pp.1-9
• /
• 1997

This paper was carried out to introduce flame retardant and antibiotic properties to polyester(PET) and polyester/cotton(P/C) blend fabrics. PET and P/C blend fabrics were treated by a paddry-cure method in the aqueous solutions of the finishing agents(JA 6034, JA 6050, DC-5700). The corona discharge technique was applied to increase the polar group of the polymer surface. The characteristics of the treated fabric were investigated by means of scanning electron microscope (SEM) and electron spectroscopy for chemical analysis(ESCA), and water penetration time, limiting Oxygen index(LOI), and K/S value were also measured. Wettability of the fabrics was increased considerably with the corona discharge treatment. ESCA was used to elucidate the surface chemical composition of the fabrics treated with the corona discharge. Relative Ols intensity increased and oxygen was incorporated in the form of -C-O-, -C=O, and O=C-O on the polymer surface. The current study indicated that corona discharge treatment was effective for modifying the polymer surface.