• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.428-441
• /
• 2015

Corresponding to the high consumption rate of the selfie stick for cell phone camera, the design of the product is becoming diverse. However, relatively low cost selfie stick models are not strong enough to stand the weight of the cell phone. This results into a bending of the stick or the accidental fall of the cell phone by the failure of the holding unit. As a solution to the problem, design of selfie stick that is structurally strong enough to stand the weight of the cell phone with the minimum weight for the portability is proposed in this paper.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.181-186
• /
• 2007

UBM (Under Bump Metallurgy) of flip chip assemblies consists of several layers such as the solder wetting, the diffusion barrier, and the adhesion layers. In addition, IMC layers are formed between the solder wetting layers (e.g. Cu, Ni) and the solder. The primary failure mechanism of the solder joints in flip chips is widely known as the fatigue failure caused by thermal fatigues or electromigration damages. Sometimes, the premature brittle failure occurs in the IMC layers. However, these phenomena have thus far been viewed from only experimental investigations. In this sense, this paper presents a method for solid modeling of IMC layers in flip chip assemblies, thus providing a pre-processing tool for finite element analysis to simulate the IMC failure mechanism. The proposed modeling method is CSG-based and can also be applied to the modeling of UBM structure in flip chip assemblies. This is done by performing Boolean operations according to the actual sequences of fabrication processes

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1626-1629
• /
• 2003

The study is expressed on the web browser using virtual reality of developer manufacturing process and method or manufactured goods conviction for designer and developer with visualized model. This study purpose of basic feature with VRML file and Java and VRML with AWT to get WC code was presented. The study process is equal to the real thing modeling on using Pro/Engineer and exports on the VRML1.0. The condition converts VRML1.0 to VRML2.0 on the CROSS ROADS. And then Cosmo World is coding and manufacturing simulation is expressed on the Cosmo Player.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.37-42
• /
• 2009

The performance of an OLED(organic luminescent emitting device) fabrication system strongly depends on the design of the evaporation cell-source. Trends in display sizes have hauled the enlargement of mother glass substrates. The enlargement of substrates requires the improvement and the enlargement of the effusion cell-source for OLED evaporation process. The deposited layers should be as uniform as possible, and therefore it is important to know the effusion profile of the molecules emitted from the cell-source. Conventional 2D DSMC algorithm cannot be used for simulating the new concept cell-source design, such as a linear source. This work concerns the development of 3D DSMC (direct simulation Monte Carlo) analysis for simulating the behavior of the evaporation cell-sources. In this paper, the 3D DSMC algorithm was developed and the film thickness profiles were obtained by the numerical analysis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.972-974
• /
• 2014

현대 사회에서 젊은 사람들의 인터넷 게임 과몰입 현상은 하나의 사회적 문제로 대두된다. 본 연구는 설문 결과를 이용하여 인터넷 게임 과몰입 사용자들의 생체 신호 차이를 비교하여 각 비교군들의 특징을 분석한다. 과몰입 사용자들의 CSG척도를 이용하여 분류한 각 몰입군 별로 Go/Nogo Task를 통하여 ERPs 신호를 측정, 특징을 분석한다. 이를 이용하여 각 몰입군 별 생리학적 지표를 만들고 인터넷 게임 과몰입자에게 몰입 정도를 알려주는 과몰입 진단 방법을 제안한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6C
• /
• pp.303-311
• /
• 2009

In this study, weakly cemented sand was cured at air dry condition with different periods (3, 7, 14, 21, 28 days) and its unconfined compressive strength was evaluated. As a result, the strength of specimens with low cement ratios such as 4 and 8% increases until 7 days curing but, after 7 days, their strength continuously decreases. The strength of specimens with relatively high cement ratios such as 12 and 16% increases up to 7 days curing and then stays almost constant until 21 days. After 21 days curing, their strength suddenly dropped down, which is much lower than the strength of 3 days curing specimen. A cemented sand and gravel called CSG, which is highly permeable, could be exposed to repetitive drying and wetting conditions due to rainfall or groundwater table change during curing. In this study, the weakly cemented sand is exposed to repetitive drying and wetting and then its unconfined compressive strength was evaluated. As a result, the strength of a specimen with 27 days drying condition following 1 day wetting was at maximum 35% lower than the one cured under 28 days drying. The strength degradation due to wetting decreases as a cement ratio increases. However, the strength of a specimen with repetitive drying and wetting increases as the number of wetting increases until 3 cycles. After 3 cycles of drying and wetting, the rate of strength increase decreases due to an insufficient water for hydration or stays constant. If the sufficient water supply is provided to cemented sand during curing, the target or design strength increase can be achieved. Otherwise, the strength degradation due to wetting should be considered at the design stage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.129-136
• /
• 2010

This study was initiated to investigate thatch accumulation in several turfgrasses grown under two soil systems. The 45 centimeter deep USGA system was constructed with rootzone, intermediate and drainage layers. The mono-layer system, however, was made with only a 30cm rootzone layer. Turfgrasses used in the study were comprised of 3 varieties from Korean lawngrass of Warm-Season Grass(WSG) and 3 blends and 3 mixtures from Cool-Season Grass(CSG). A total of 9 turfgrass treatments were replicated three times in RCBD in both systems. Cultural practices for the research plot followed a typical maintenance program for highly managed turf. Treatment differences for thatch accumulation were observed among the turfgrasses in both soil systems. Thatch under the USGA system was 9% greater than under the mono-layer system due to its more favorable conditions for turf growth. Higher thatch depth was found with Korean lawngrass, 34~87% in the USGA system and 16~75% in the mono-layer system when compared with CSG. Among WSG, the Joongji variety was the highest in thatch layer under both the USGA and mono-layer systems. Kentucky bluegrass(KB) was the greatest among CSG, since it is a rhizomatous-type in growth habit, resulting in faster production of organic matter over bunch-type of tall fescue and perennial ryegrass. Proper depth in the thatch layer was known to be beneficial by enhancing the resiliency and wear tolerance of the turf in athletic fields. Thus, KB was considered to be a very excellent turfgrass in terms of turf quality, environmental performance, physical properties and soccer player safety. However, disadvantages such as poor water-holding properties, more inclined to injury from environmental stresses and severe diseases and insect injury were also expected where thatch was excessively accumulated. Therefore, these results demonstrate that more frequent measures for controlling thatch such as vertical mowing, topdressing or coring should be employed for soccer fields with Korean lawngrass and KB over other turfgrasses.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.257-273
• /
• 2023

Hydrochemical characteristics and microbial communities of spring (Samtong), surface water, and groundwater in Cheorwon, Korea, were analyzed. Field surveys and water quality analyses were undertaken at 10 sampling points for five spring, two surface, and three groundwater samples on 15 December 2022. Hydrochemical analysis revealed that most water samples were Ca-HCO₃ type and that water-rock interactions were the predominant mineral source. Radon concentrations were <1 kBq m^-3 for surface water, 1~10 kBq m^-3 for spring water, and 1~1,000 kq m^-3 for groundwater. Microbial cluster analysis showed that the main phyla were Proteobacteria, Planctomyceta, Verrucomicrobia, Acidobacteria, and Actinomycetota.Non-metric multidimensional scaling (NMDS) analysis indicated that water temperature, pH, and Si content were closely related to microorganism content. NMDS and canonical correspondence analysis results revealed that environmental factors affecting spring water were temperature, and Mg and Si concentrations, particularly for Acidobacteria and Proteobacteria, and Pseudomonas brenneri. Both hydrochemical and microbial community analyses yielded similar results at some spring and groundwater sampling points, likely due to the effects of a basalt aquifer.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.98-108
• /
• 1998

Hull design data is currently prepared by a 2D CAD system and re-input to 3D CAD systems specialized for detail design or to a structural analysis system. In this paper, sharing design data among different CAD systems has been studied. Based on STEP methodology, a neutral model is generated from 2D AutoCAD drawings. To handle a geometric data of this model, the non-manifold model of ACIS is used because it can support various CAD data representation such as 2D graphic entities, 3D wireframe, 3D surface model, and solid B-Rep/CSG model. It is observed that a mon-manifold model can easily be transformed to a 3-D wireframe model for the hull detail design system AutoDef or a FE model for the structural analysis system Nastran.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.342-353
• /
• 2016

This study was initiated to evaluate green color retention under three different soil systems. Several turfgrasses were evaluated in multi-layer, USGA, and mono-layer systems. Turfgrass entries were comprised of three cultivars of Korean lawngrass (Zoysia japonica Steud.) as warm-season grass (WSG) and three blends and three mixtures of Kentucky bluegrass (KB, Poa pratensis L.), perennial ryegrass (PR, Lolium perenne L.), and tall fescue (TF, Festuca arundinacea Schreb.) as cool-season grass (CSG). Significant differences were observed in visual turf color and green color retention among soil systems and turfgrasses. Both the multi-layer and USGA systems were highly associated with better color ratings and longer color retention, as compared with the mono-layer system. Seasonal variation of visual turf color greatly occurred from late December to early spring. CSG exhibited longer color retention than did WSG. The latter maintained green color for approximately 6 months, regardless of the soil system. Spring green-up of Korean lawngrass occurred from early to middle May, while it underwent discoloration from late October to early November. Among the CSGs green-up occurred between early March and early April and leaf color was maintained until middle December to early February. Therefore, the CSGs were green for 8.5 to 11 months, depending on turfgrass and soil system. The mean period of green color duration across all soil systems was approximately 10-11, 9-10 and 8.5-9.0 months for PR, KB and TF, respectively. As for the CSG mixtures, the greater the proportion of PR, the longer the green color retention, while the higher the proportion of TF, the shorter the color retention. There was greater variation in green color duration among the CSGs than the WSGs. Across soil systems, color retention differences of 2 to 6 days were observed for the Korean lawngrass, but 7 to 36 days for the CSGs. These results demonstrate that green color retention varied greatly according to soil systems and also among turfgrasses. Selections of turfgrass and soil system should be made using a concept-oriented approach, when establishing garden, park, soccer field, golf course and other sports field. Information obtained in this study can be used to select soil systems and turfgrasses based on the expected degree of leaf color retention.