• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.92-101
• /
• 2000

The objective of this paper is to design the controller for longitudinal vehicle following which makes the vehicle follow the lead vehicle and keeps a safety distance without human driver operation. This paper presents a sliding mode control algorithm for the ACC system. The controller is based on three sliding surfaces. Each surface plays an individual control-deviation control, throttle control and brake control. In addition to sliding mode control, we propose some additional schemes to enhance controller performance. The first one is a gear shift-down controller which makes tractive force increase with a change of gear ratio. The other is a predictive correction method which reduces slinky effect.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.107-113
• /
• 2005

In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead HTTP(Hyper Text Transfer Protocol) web server, and the system which can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized For sensing the operation condition and change of vehicle the desired data is derived by interfacing ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle valve.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.166-166
• /
• 2004

운전자 보조시스템에는 적응순항제어 (adaptive cruise control), 차선변경 (lane change), 충돌경고 (collision warning), 충돌회피 (collision avoidance), 및 자동주차 (automatic parking) 등이 있다. 이런 운전자 보조시스템은 어떤 목적을 가지고 있다. 운전자의 부담을 줄이고 안전을 위하여 차량의 주행방향에 있는 장애물이나 차량을 감지하여 차량간의 안전거리론 유지하고 자동차가 일정 속도를 유지하도록 한다. 운전자 보조시스템의 효율은 센서들로부터 얻어진 정보의 해석에 달려있다.(중략)

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.209-214
• /
• 1997

본 논문에서는 직선주로상에서 차량의 정속 주행을 위한 제어기를 설계하였다. 전형적으로 차량이라는 것은 동특성과 특유한 비선형성에 기인하는 속도로 기술된다. 가장 효율적인 제어방식인 1차 퍼지 제어기를 바탕으로 한 선형 가속 제어기를 주제어기로 사용하고 승차감에 대한 언어적인 기술을 기반으로 2차 퍼지 제어기를 사용하였다. 그리고 설계된 제어기를 가상차량 모델에 적용하였다. 그리고 NATLAB을 이용하여 시뮬레이션하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.185-188
• /
• 1999

An estimation algorithm for vehicle driving load has been proposed in this paper. Driving load is an important factor in a vehicle's longitudinal motion control. An approach using an observer is introduced to estimate driving load based on inexpensive RPM sensors currently being used in production vehicles. Also, a torque estimation technique using nonlinear characteristic functions has been incorporated in this estimation algorithm. Using a nonlinear full vehicle simulation model, we study the effect of the driving load on longitudinal vehicle motion, and the performance of the estimation algorithm has been evaluated. The proposed estimation algorithm has good performance and robustness over uncertainties in the system parameters. An accurate estimate of the driving load can be very helpful in the development of advance vehicle control systems such as intelligent cruise control systems, CW/CA systems and smooth shift control systems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.1-7
• /
• 2011

Various convenient systems which are telecommunication and navigation system and safety system which include Antilock Braking System, Electronic Stability Control, Adaptive Cruise Control have been developed and applied to meet customer needs and each standards since vehicles are used. The complexity of new electronics become significant reason of breakdown especially embedded software failures. Hardware reliability is almost stabilized with long history but software reliability needs more improvements through reliability researches. This new challenge will improve software reliability to clear its overall failures in vehicles. This paper introduces some software reliability models and evaluates embedded software reliability using failure data which occurred during operating.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.82-87
• /
• 1997

This paper presents a new approach to the design of cruise control system of a mobile robot with two drive wheel. The proposed control scheme uses a Gaussian function as a unit function in the fuzzy-neural network, and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized learning architecture. It is proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is shown by performing the computer simulation for trajectory tracking of the speed and azimuth of a mobile robot driven by two independent wheels.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.643-649
• /
• 2012

Lab scale experiment study was carried out for biological treatment process development in cruise. SBR(Sequence Batch Reactor) process with BM(Beneficial Microorganisms) was investigated for practical application on shipboard sewage treatment. From the results it was suggested that SBR process with BM might be a suitable process for advanced cruise sewage treatment in terms of decrease in T-N and T-P, maintenance of useful microorganisms and control of sludge bulking. By adding BM to SBR system, about 40% of EPS in sludge was increased, about 74% of total nitrogen was reduced and the total phosphorus reduction averaged 75%.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.5
• /
• pp.273-279
• /
• 2015

The vehicle has lots of embedded systems. Each of systems has its own role. In case of the vehicle, simple failure of system can be critical to driver. Therefore all of embedded system should be managed based on importance factors to be effective. In this paper, we consider the resilience as the importance factor for the driving system with ACC(Adaptive Cruise Control). We propose metrics to calculate the resilience of the embedded system. To get the resilience of system, we calculate the reliability and the resilience of nodes in the system using its failure rate. The resilience of whole system can be presented by the resilience of nodes and its weight. We calculate the resilience and compare the centralized structure and the distributed structure.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.41-48
• /
• 2005

The Rotating transmission is made up of belts, mass disks and gears. This transmission is controlled electro-mechanically by the motor and operation program. The control strategy of the system can be to change belts' stiffness and the masses of mass disk and gear. This system can be modeled as a rigid body, and also finds broad application in such diverse fields as machine tools, the cruise control system In automobiles, and control in the attitude and gimbals of spacecraft. This Transmission proves the necessity and effect of a closed loop control. The study of the Rotating Transmission excited by its base motion is able not only to predict the rotational performance, but to obtain the fundamental data for vibration isolation. In this research, we compared the response characteristics of the two controllers by means of the experiments on PD controller and PID controller added on integral action. Furthermore, we studied the response abilities such as steady state error, overshoot, and ect. and the response velocities such as rising time, settling time, and ect. in the rotating transmission.