• Clinical and Experimental Pediatrics
• /
• v.58 no.12
• /
• pp.466-471
• /
• 2015

Purpose: This study attempted to examine parental satisfaction with pediatric emergency care (PEC) in Korea and investigate the features influencing overall satisfaction. Methods: A nationwide, cross-sectional survey was conducted among parents who had taken their children to an Emergency Department (ED) in the three years prior to the study. A 21-item, structured questionnaire was administered to the parents through a web-based system. Participants' satisfaction levels and the strength of the association between PEC components and overall satisfaction were rated using a 7-point Likert scale. Results: In total, 1,000 parents participated in the survey, of which 402 (40.2%) stated that they were generally satisfied with the delivered PEC. Female participants, mothers, and parents with low-acuity patients were more likely to be dissatisfied with the delivered PEC. Although the ED environment was the lowest level of satisfaction, it did not significantly influence the respondents' overall levels of satisfaction. The most influential factors in terms of overall satisfaction were "nurses' professionalism" and "doctors' attitude and proper explanation". Conclusion: Parents' overall level of satisfaction with PEC is relatively low and is closely related to factors associated with ED personnel.

• Korean Journal of Human Ecology
• /
• v.16 no.6
• /
• pp.1107-1118
• /
• 2007

This study explored the consistency of bullying, victimization and aggressive victimization, the relationships between bullying, victimization and aggressive victimization and overt/relational aggression, and the relationships between bullying groups and overt/relational aggression with gender. The subjects were 4th grade children and 2 years later they were contacted again. Instruments were the Bully-Behavior Scale, the Peer-Victimization Scale and the Peer Nomination Instrument. Bullying, victimization and aggressive victimization were decreased while there were consistencies in overt and relational aggression from 4th to 6th grade. In the correlation analysis, male victims at Time 1 were negatively related to overt and relational aggression at both Time 1 and Time 2. Female bullies were positively related to relational aggression at both Time 1 and Time 2. In the cross-sectional relations of overt aggression with bullying groups, there was a gender difference. In the relational aggression with bullying groups, only bullying groups had a significant difference. In the longitudinal relations of overt aggression with bullying groups, only gender had a significant difference. Males appeared to be more overtly aggressive than females. In the relational aggression, bullying groups, gender, and the interaction between bullying groups and gender had significant differences. Female bullies were more likely to be relationally aggressive than other groups.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6657-6663
• /
• 2014

Background: The present study aimed to determine the prevalence and types of sexual problems of Turkish patients receiving gynecologic cancer treatment. Materials and Methods: A cross-sectional convenience sample of 168 women completed the Index of Female Sexual Function (IFSF) and a Patient Identification Form in a hospital in Ankara, Turkey. Mean IFSF scores of the patients were low ($15.7{\pm}5.72$, out of a possible 45), indicating high rates of sexual problems. Results: Women frequently reported problems with dyspareunia (97.1%), vaginal dryness (97.6%), decreased sexual desire (91.1%), and difficulties of sexual arousal (92.9%) related with the cancer treatment process. They reported increased sexual problems following the period of treatment as compared to before treatment (p<0.05). Sexual dysfunction was associated with low educational and income levels, advanced age, TAH-BSO-LND surgery (total abdominal hysterectomy-bilateral salphingoopherectomylymph node dissection), experiencing side effects of chemotherapy, receiving chemotherapy in addition to surgery and radiotherapy (CT+RT+Surgery), and having a large number of chemotherapy cycles (p<0.05). Conclusions: Patients hoped for and expected counseling from healthcare professionals about their sexual functioning in relation to cancer treatments. Nurses and physicians can help to improve the overall quality of life for gynecologic cancer patients through sexual counseling.

• Journal of Korea Foundry Society
• /
• v.26 no.2
• /
• pp.85-91
• /
• 2006

Inclusions in Ti investment castings are generally known to have detrimental effects on the performance of the castings. However, actual inclusions are infrequent and hard to be located. As a result, it is extremely difficult to obtain sufficient amount of fatigue test specimens of titanium investment castings having inclusions in the gage section. Thus, in-depth research of the adverse influence of inclusions is also hindered. To address this problem, a new casting methodology of specimens containing hard alpha inclusions was developed in this study. To guarantee successful introduction of an inclusion and casting, a carefully designed mold with 8 legs and a special tool were employed. After solidification, castings were cut, and X-ray radiography determined that the inclusions were successfully incorporated into the castings. The castings were further prepared to obtain multiple test specimens and they were fatigue-tested consecutively. Fractography analysis confirmed that fatigue cracks initiated at the hard alpha inclusion. In a nonlinear regression model, the fatigue life can be modeled as an exponential function with a negative exponent of the cross-sectional area of an inclusion. The fatigue life of Ti specimens containing inclusions is inversely proportional to the cross-sectional area of an inclusion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1058-1065
• /
• 2004

In the present study, characteristics of steady state laminar flows of a straight duct connected to a 180$^{\circ}$ curved duct were examined in the entrance region through experimental and numerical analyses. For the analysis, the governing equations of laminar flows in the Cartesian coordinate system were applied. Flow characteristics such as velocity profiles, and secondary flows were investigated numerically and experimentally in a square cross-sectional straight duct by the PIV system and a CFD code(STAR CD). For the PIV measurement, working fluid produced from mosquito coils smoke. The experimental data were obtained at 9 points dividing the test sections by 400 mm. Experimental and numerical results can be summarized as follows. Critical Reynolds number, Recr which indicates transition from laminar steady flow to transition steady flow was 2,150. As Reynolds number, Re, was increased, dimensionless velocity profiles at the outer wall were increased due to the effect of the centrifugal force and the secondary flows. The intensity of a secondary flow became stronger at the inner wall rather than the outer wall regardless of Reynolds number.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.69-75
• /
• 2016

Polydimethylsiloxane (PDMS) is used as a scaffold for cell culture. Because both the stress and strain acting on the substrate and the hemodynamic environment are important for studying mechano-transduction of cellular function, the traction force of the surface of a substrate has been measured using fluorescence images of particle distribution. In this study, deformation of the cross-sectional plane of a PDMS block was measured by correlating particle image distributions to validate the particle image strain measurement technique. Deformation was induced by a cone indentor and a shearing parallel plate. Measured deformations from particle image distributions were in agreement with the results of a computational structure analysis using the finite-element method. This study demonstrates that the particle image correlation method facilitates measurement of deformation of a polymer scaffold in the cross-sectional plane.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.39-49
• /
• 2020

This study empirically examines herd behavior for fast moving consumer goods (FMCG) sector stocks under varied market return conditions and the period during the global financial crisis and its aftermath. We examine the sample of stocks trading on the Nifty FMCG Index of the Indian equity market from January 2008 up to December 2018 using the dispersion measure of cross sectional absolute deviation and examine its relationship with the market return to explore herd phenomenon. Quantile regression estimate is used and the results of the study validate rational asset pricing models as the sector does not display herding. In contrast, anti-herd behavior at lower and median quantile values is observed. A possible reason can be the non-cyclical nature of the industry where investors rely more on the fundamentals rather than crowd chasing. We also findthe absence of herd phenomenon during the market asymmetries of bull and bear phases, extreme movements, the period of the global financial crisis, and afterward. We further examine herding under the impact of the information technology (IT) industry and conclude that significant return movements in IT sector impact dispersions in the FMCG industry. Also, there is a co-varying risk between the two sectors confirming the spillover in an integrated market.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.484-489
• /
• 2003

The mass flow rate of gas flow through critical nozzle depends on the nozzle supply conditions and the cross-sectional area at the nozzle throat. In order that the critical nozzle can be operated at a wide range of supply conditions, the nozzle throat diameter should be controlled to change the flow passage area. This can be achieved by means of a variable critical nozzle. In the present study, both experimental and computational works are performed to develop variable critical nozzle. A cone-cylinder with a diameter of d is inserted into conventional critical nozzle. It can move both upstream and downstream, thereby changing the cross-sectional area of the nozzle throat. Computational work using the axisymmetric, compressible Navier-Stokes equations is carried out to simulate the variable critical nozzle flow. An experiment is performed to measure the mass flow rate through variable critical nozzle. The present computational results are in close agreement with measured ones. The boundary layer displacement and momentum thickness are given as a function of Reynolds number. An empirical equation is obtained to predict the discharge coefficient of variable critical nozzle.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.17-22
• /
• 2019

Currently, studies on weight reduction and fuel efficiency increase are the most important topics in the automotive industry and many studies are under way. Among them, weight reduction is the best way to raise fuel efficiency and solve environmental pollution and resource depletion. Materials such as aluminum, magnesium and carbon curing materials can be found in lightweight materials. Among these, research on improvement of bonding technology and manufacturing method of materials and improvement of material properties through study of ultrahigh strength steel sheet is expected to be the biggest part of material weight reduction. As the strength of the ultra hight strength steel sheet increases during forming, it is difficult to obtain the dimensional accuracy as the elastic restoring force increases compared to the hardness or high strength steel sheet. It is known that the spring back phenomenon is affected by various factors depending on the raw material and processing process. We have conducted analytical evaluations and studies to analyze the springback that occurs according to the cross-sectional shape of the ultra high tensile steel sheet.

• Journal of Society of Preventive Korean Medicine
• /
• v.13 no.1
• /
• pp.93-103
• /
• 2009

Evidences from various countries suggest that toxic heavy metals in herbal medicine may constitute a serious health problem. In order to evaluate whether the toxic heavy metals caused by herbal medicine intake, blood samples collected from 222 patients taking herbal medicine were analyzed. In average levels of analyzed metals, $0.4{\sim}33.9%$ of total samples for 8 metals such as Cd, Co, Cu, Hg, Mn, Ni, Pb and Zn except Cr and Fe exceeded the upper limit for WHO reference value. In analysis of regression coefficients indicating the levels of metals increased or decreased after taking herbal medicine for one month, however, there were different aspects by intake types for herbal medicine. For example, the metals increased by taking decoction in blood samples were as follows; Cd and Pb whether Mn, Ni and Pb as increased metals were identified in the group taking pill and decoction(combined intake group). The odds ratio showing values higher than 1 indicating that people who take herbal medicine would have possibility higher for metal accumulation in blood than that from people who do not take herbal medicine. The metals showing the odds ratio higher than 1 were Hg and Ni in decoction group, and Cd and Hg in combined intake group. However, eight of the total, 10 metals showed the odds ratios lower than 1 by taking herbal medicine. Thus, this may explain the possible role of herbal medicine as a chelator for heavy metals in body.