• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1153-1163
• /
• 2013

Bonded concrete overlay is a favorable maintenance method since the material properties are similar to existing concrete pavements. In addition, bonded concrete overlay has advantage of structural performance based on being bonded together, both for the overlay layer and the existing pavement which perform as one monolithic layer. Therefore, it is important to have a suitable bond strength criteria for long term performance of bonded concrete overlay. This study aimed to investigate the affecting of bond strength on various bond characteristics, and to compare the bond strength between direct tensile test and indirect tensile test due to various conditions such as overlay materials, compressive and flexure strength of existing pavement, and deterioration status of existing pavement. As a result of this study, bond strength occurred by both of direct and indirect tensile test due to monotonic load is highly correlated such as coefficient of determination of 0.75 and P-value of 0.002. However, bond strength by indirect tensile test was relatively higher than bond strength by direct tensile test. It was known that correlation between direct and indirect tensile test was possible to use the characteristics analysis of bond fatigue behavior based on bond strength due to cyclic load which can simulate real field behavior of bonded concrete overlay.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.161-178
• /
• 2006

Heathcote (1998) identified a systematic, seven-step approach to general watershed planning and management. It consists of 1) understanding watershed components and processes, 2) identifying and ranking problems to be solved, 3) setting clear and specific goals, 4) developing a list of management options, 5) eliminating infeasible options 6) testing the effectiveness of remaining feasible options, and 7) developing the final options. In this study the first five steps of that process were applied to the Anyangcheon watershed in Korea, which experiences streamflow depletion, frequent flood damages, and poor water quality typical of highly urbanized watersheds. This study employed four indices: Potential Flood Damage(PFD), Potential Streamflow Depletion(PSD), Potential Water Quality Deterioration(PWQD) and Watershed Evaluation Index(WEI) to identify and quantify problems within the watershed. WEI is the integration index of the others. Composite programming which is a method of multi-criteria decision making is applied for the calculation of PSD, PWQD and WEI (Step 2). The primary goal of the study is to secure instreamflow in the Anyangcheon during dry seasons. The second management goals of flood damage mitigation and water quality enhancement are also set (Step 3). Management options include not only structural measures that can alter the existing conditions, but also nonstructural measures that rely on changes in human behavior or management practices (Step 4). Certain management options which are not technically, economically, and environmentally feasible, are eliminated (Step S). Therefore, this study addresses a Pre-feasibility study, which established a master plan using Steps 1 through 5.

• Korean Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.327-336
• /
• 2007

This study assessed ecological health using a multi-metric fish model from 15 sites in the headwater watershed of southern Han River during June${\sim}$August 1999 and then compared the health with conventional community diversity index to figure out differences between health and diversity index. For the analysis, we adopted 10 metric IBI model for regional applications. During this survey, total number of species sampled were 24 (6 families) and varied depending on magnitude of ecological disturbance and stream order. In the mountainous streams, mean proportion of sensitive and insectivore species was composed of 91% and 56%, respectively, indicating a potential healthy conditions. However, tolerant species with 66% and omnivore species with 76% were sampled from the 2nd order stream, which was shown deterioration in the physical habitat quality. In the overall watershed, mean IBI value was 38, judging as "fair" condition by the health criteria. Values of Individual IBI were closely associated with stream order and this pattern was similar to other mountainous streams showing low chemical pollutions and disturbance. Our comparison between IBI and diversity index over the stream order showed a distinct difference; Shannon-Weaver diversity index overestimated the actual community conditions and the variation range in the 2nd order stream was greater in the diversity index. Overall data suggest that the multi-metric approach may to a useful tool for stream ecosystem management and the conventional diversity index may not effective unless the stream order is considered for the stream evaluation.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.368-380
• /
• 2019

This study proposes a method to evaluate the performance of a detector by analyzing the dynamic step wedge and histogram according to the change of the tube voltage and sensitivity when using the Automatic Exposure Control (AEC). The performance of a detector was evaluated by measuring X-ray quality, Entrance Surface Dose (ESD), tube current, dynamic range corresponding to detector sensitivities of S200, S400, S800, S1000 per tube voltage of 60, 70, 81, 90 kVp. As a results, all of the qualities satisfied the acceptance criteria, and the Entrance Surface Dose and tube current were decreased stage by stage as sensitivity was set higher. In the dynamic step wedge, the observable dynamic range has also increased as tube voltage became higher. The histogram showed the quantization separation phenomena as the tube voltage was set higher. The higher the sensitivity, the more the underflow and overflow occurred in which the amount of information on both ends of the histogram was lost. In conclusion, the deterioration in the performance of the detector was found to be insufficient to realize the change of the tube voltage and sensitivity when using the Automatic Exposure Control, and it is useful to use dynamic step wedge and histogram in evaluating detector performance evaluation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2010

Oyster production is playing an important role in domestic aquaculture, but facing some problems such as exports decrease, a slowdown in domestic demand and marine environmental deterioration. In order to obtain the suitable and sustainable oyster production, suitable sites selection is an important step in oyster aquaculture. This study was conducted to identify the suitable sites for lunging culture of oyster using Geographic Information System(GIS)-based multi-criteria evaluation methods. Most of the parameters were extracted by Inverse Distance Weighted(IDW) methods in GIS and eight parameters were grouped into two basic sub-models for oyster aquaculture, namely oyster growth sub-model(Sea Temperature, Salinity, Hydrodynamics, Chlorophyll-a) and environment sub-model(Bottom DO, TOC, Sediment AVS, Benthic Diversity). Suitability scores were ranked on a scale from 1(leased suitable) and 8(most suitable), and about 80.1% of the total potential area had the highest scores 5 and 6. These areas were shown to have the optimum condition for oyster culture in GeojeHansan Bay. This method to identify suitable sites for oyster culture may be used to develop bivalve culture management system for supporting a decision making.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.9
• /
• pp.357-370
• /
• 2015

Massive data occurred in a manufacturing place is able to fulfill very important roll to improve the manufacturing process. Domestic manufacturing business has been making an multilateral effort to react the change of manufacturing circumstance, but it undergoes many difficulties due to technical weakness. Coatings is a type of paint. It protect products by forming a film layer on the products and assigns various properties to those. The research of coatings is one of the fields studied actively in the polymer industry. The importance of the coatings in various industries is more increased. However, the industry still performs a mixing process in dependence on operator's experiences. In this paper, we propose a design for realtime monitoring system and data analysis verification TA to improve the manufacturing process using HW-SW integrated framework. Analysis results from the proposed framework are able to improve the coatings formulation process by collecting more quantitative reference data for work and providing it to work place. In particular, the framework may reduce the deterioration and loss cost which are caused by absence of a standard data as a accurate formulation criteria. It also may suggest a counterplan regarding errors which can be occurred in the future by deriving a standard calibration equation from the analysis using R and Design of Experiments about an error data generated in the mixing step.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1366-1381
• /
• 1997

Background : Uvulopalatopharyngoplasty(UPPP) has become the most common surgical treatment for obstructive sleep apnea syndrome(OSAS). However, the results of this therapeutic modality have been quite variable with successful results by several authors and poor results by others. Until recently, in Korea, there is only a few reports about the clinical efficacy of UPPP. A prospective study was undertaken to evaluate the effectiveness and complications of UPPP. Method : Twenty-six OSAS patients who had undergone UPPP with preoperative and postoperative polysomnographic studies were included in this study. Two definitions of surgical success were used. The responder was defined, using a conventional criteria, as a 50% or more reduction in apnea index(AI) or apneahypopnea index(AHI) after UPPP, or a postoperative AI of <10 or AHI of <20. The initial cure was defined, using our own criteria, as a postoperative AI of <5 or AHI of <10. Complications were categorized in two groups : early(disorders during the first 10 postoperative days) and late. Results : Eighteen patients(69.2%) were responders, and ten patients(38.5%) were considered as initial cure. On the other hand, in five patients (19.2%), postoperative polysomnographic data demonstrated deterioration compared with preoperative data. Reduction rate of AI or AHI following UPPP was not significantly related to the preoperative body mass index, AI or AHI. There was no significant change of sleep architecture before and after UPPP in responder and initial cure groups. Early complications such as pain, dyspnea, bleeding, nasal reflux, dysphagia or wound disruption were observed in all patients. Late complications such as nasal reflux, voice change, dysphagia, loss of taste, pharyngeal dryness or foreign body sensation were discovered in 22 patients (84.6%). However, all early and late complications were of minor importance. Conclusion : The response to UPPP was favorable in approximately 70% of OSAS patient. However, the initial Cure rate of UPPP was relatively low. We suggest that selection of more appropriate surgical candidates and adequate surgical protocol is necessary to obtain a more successful result with UPPP.

• Korean Journal of Environment and Ecology
• /
• v.34 no.1
• /
• pp.18-26
• /
• 2020

Echinosophora koreensis (Nakai) Nakai an endemic plant with limited distribution in some parts of the Korean Peninsula, is designated as "Endangered" species on the IUCN Red List. The species is under the threat of deterioration in nature due to various environmental changes causing loss of natural habitats. We investigated the distribution pattern and population structure of E. koreensis to serve as a basic reference for identifying the dynamics and persistence of natural populations of this species in the future. To determine the characteristics of the E. koreensis population, we laid two to three large plots sized 20m×30m on the ridgeline as the reference in Yanggu, Chuncheon, and Hongcheon and laid four to seven small quadrats sized 1m×1m on the transect. A total of 530 plots were laid, 10 each at 2m interval, to measure the number of the stems, the number of fruiting, height, and other factors. The collected distribution information was compared with the existing IUCN assessed categories by applying IUCN Red List ver 3.1 Criteria B. The average population density of the three surveyed areas was 3.47 stem/㎡; the density of each area was 3.95 stems/㎡ in Yanggu, 3.37 stems/㎡ in Chuncheon, and 2.87 stems/㎡ in Hongcheon. The number of fruiting per stem was 0.0038, indicating only 7 fruits out of 1,837 stems and that vegetative reproduction is likely to be more dominant than sexual reproduction. The distribution tendency of population density in the small plots in three surveyed areas showed that the density of E. koreensis tended to decrease toward the center of the forest with low crown openness and around the mountain ridge with high crown openness. It indicated that the quantity of light could be a very important factor for the growth of individuals of this species. The analysis of the heights of individuals present in the surveyed plots showed a range of 2.3 ~ 68.5cm and an average of 20.1cm. An analysis on the stage-structure of the E. koreensis population based on the sieve height found that the appearance frequency decreased with increasing height above 15 ~ 20cm and that the percentage of individuals lower than 10cm, which were presumed to be seedlings, was severely low, indicating a necessity of study on the population sustainability based on the monitored data. The occupied area calculated with the collected species distribution information was 200㎢, indicating the EN category according to the IUCN Red List Reference B.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.17-21
• /
• 2014

Purpose With the recent rise of social issue regarding radiation exposure, attention to medical radiation use has been placed under a great spotlight. During PET-CT examination, generally about 40% more of $^{18}F$-FDG is used than EANM recommendation. While maintaining the diagnostic test result, we hope to find optimal injection dose to minimize the $^{18}F$-FDG in patients by utilizing the latest PET-CT scanner which is equiped with the newest technology. Materials and Methods During this experiment, the Biograph Truepoint 40 (siemens, USA) installed in 2007 and mCT 64 (siemens, USA) installed in 2011 were used and evaluated NECR (noise-equivalent counting rate) by using a scatter phantom. For the image quality evaluation of each scanner, we injected 3.7, 4.44 and 5.18 MBq/kg of $^{18}F$-FDG in NEMA IEC Body Phantom and also evaluated SNR between two scanners by using the data acquired at 60, 70, 80, 90, 100, 110 and 120 sec per bed. For the clinical evaluation, actual data of patients who were injected $^{18}F$-FDG 3.7, 4.44, 5.18 MBq/kg were used to compare SNR and draw a final result. Results As a result, mCT 64 peak NECR value was 1.65e+005, which is 10% higher than Turepoint 40. SNR values using the IEC body phantom was 17.9%, 17.4% and 17.1% higher in $^{18}F$-FDG 3.7 MBq/kg, 4.44 MBq/kg and 5.18 MBq/kg. In clinical patients, SNR values of the image mCT 64 was 16.5, which is 25% higher than Turepoint 40 scanner. Conclusion To draw a conclusion from the test result of this experiment, the same quality of SNR could be attained even with 10% reduced injection dose, if when the duration is extended by 10 sec/bed. This optimal result was possible due to enhanced equipment. The NECR (one of the equipment's performance assessment criteria for the scanner) increased by 10% and the SNR (one of the image quality assessment criteria) also increased by 17.5%. Therefore, we can expect to reduce the injection dose without deterioration of image quality. In consequence, it will also help to decrease the patient's anxiety of the radiation exposure.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1251-1260
• /
• 2022

Recently, due to the deterioration of watermains and the detachment of scale which is accumulated on the watermain surface, water quality accidents in a water supply network occur frequently. As scale accumulated on watermains is stabilized, it may not cause water quality accidents under the normal operating condition. However, due to water hammer or transient flow caused by the abrupt velocity and/or direction of flow change, it can be detached from the watermain surface resulting in water quality accidents. To prevent these kinds of water quality accidents, it is required to remove scale by watermain cleaning regularly. Many researches about flushing which is the most popular water cleaning method are focused on the desirable velocity criteria and the cleaning condition to accomplish the effect of flushing whereas less amount of research effort is given to develop a method to consider whether the desirable velocity for flushing can be obtained before flushing is performed. During flushing, the major and minor headloss is occurred when flushing water flows through a hydrant or drain valve. These headloss may slow down the velocity of flushing water so that it can reduce the flushing effect. Thus, in this study, we suggest a method to simulate the flow velocity of flushing water using "MinorLoss Coefficient" and "Emitter Coefficient" in EPANET. The suggested method is applied to a sample network and the water supply network of "A" city in Korea to compare the flushing effect between "flushing through a hydrant" and "flushing through a drain valve". In case of "flushing through a hydrant", if the hydraulic condition ocurring from a watermain pipe connecting to the inlet pipe of a hydrant to the outlet of a hydrant is not considered, the actual flowrate and velocity of a flow is less than the simulated flowrate and velocity of a flow. In case of "flushing through a drain valve", the flushing velocity and flowrate can be easily simulated and the difference between the simulated and the actual velocity and flowrate is not significant. Also, "flushing through a drain valve" is very effective to flushing a long-length pipe section because of its efficiency to obtain the flushing velocity. However, the number and location of a drain valve is limited compared to a hydrant so that "flushing through a drain valve" has a limited application in the field. For this reason, the engineer should consider various field conditions to come up with a proper flushing plan.