• Title/Summary/Keyword: coverage ratio

검색결과 441건 처리시간 0.03초

동해안 춘·하계 조하대 해조군집의 생태학적 평가 (Ecological Evaluation of the Spring and Summer Subtidal Marine Algal Communities Along the East Coast of Korea)

  • 한수진;김영윤;김현정;황철희
    • 한국수산과학회지
    • /
    • 제54권6호
    • /
    • pp.1007-1016
    • /
    • 2021
  • This study examined the characteristics and seasonal distribution patterns of subtidal marine algal communities along the east coast of Korea, from 2016 to 2017, and recorded the coverage ratio (%) by the algal type. During the study period, 134 marine algae species (16 green, 29 brown, and 89 red) were identified at the survey sites. The maximum number of species was observed at the Nagok site (70 species), and the minimum at the Gisamoon site (50 species). The total average biomass (dry weight) during the survey period was 66.22 g/m2, including green algae (2.19 g/m2), brown algae (38.10 g/m2), and red algae (25.94 g/m2). The dominant seaweeds in the vertical distribution based on coverage rates (%) were Sargassum yezoense and Dictyopteris divaricata at the upper, Symphyocladia latiuscula and Undaria pinnatifida at the middle, and Agarum clathratum subsp. yakishiriense and Plocamium telfairiae at the lower sections of the distribution. Richness, evenness, and diversity index, calculated based on the biomass of the abundant species, were estimated to be 6.36, 0.55, and 1.98, respectively, over the entire sea area. Based on the evaluation of the environmental states using community indices, the ecological evaluation index (EEI-c) of subtidal marine algal communities along the east coast of Korea was marked as 'good-moderate'.

Suggestion of Spring Seedling Amounts and Drone Spreader Type for Italian Ryegrass using Drones

  • Hyeonsoo Jang;Seung-Hwa Yu;Yun-Ho Lee;Hui-Woo Lee;Pyeong Shin;Dae-Uk Kim;Jin-Hui Ryu;Jong-Tak Youn;Jung-Won Kim;Bo-Gyeong Kim
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.129-129
    • /
    • 2022
  • The production area of Italian ryegrass feed is gradually increasing and labor-saving technologies are being developed. If sowing and fertilization are carried out agricultural drones, working hours and labor are reduced. The purpose of this study is to suggest an appropriate seedling amount for feed production by drone spreading of Italian ryegrass in spring. In addition, we would like to review the productivity of the drone seeding machine that is being developed by Rural Development Administration(RDA) of Korea. Italian ryegrass was sown by a drone in February at the NICS located in Gyehwa-hwa, Jeollabuk-do, South Korea. In Experiment 1, 50kg/ha, 60, 70, and 80 seeding rates were sown with a horizontal spreader drone. In Experiment 2, uniform spreaders type drone and horizontal spreader type were sown with the same seeding amount and compared. The drone was sown using the AF-52 aircraft. The higher the seeding amount, the higher the emergence rate. As the seeding amount increased, the plant length increased, but the number of tillers per individual decreased. The dry matter weight of the feed was the highest at 1,326kg/10a at the seeding rate of 70kg/ha, and decreased by 20.5% at the seeding rate of 80kg/ha. The coverage ratio was the highest at 96 at the seeding rate of 70kg/ha, which was the most advantageous for spring sowing. In the comparative experiment according to the spreader type, the uniform spreader had a high emergence rate per unit area. When the uniform spreader was used, the dry matter weight of the feed was 17% higher than that of the horizontal one, and the coverage was about 5% higher.

  • PDF

Water vapor barrier properties of polymer-like amorphous carbon deposited polyethylene naphthalate film

  • 김정용;박규대;송예슬;이희진;;김성룡
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.303.1-303.1
    • /
    • 2016
  • Polymer-like amorphous carbon films were deposited on polyethylene naphthalate (PEN) substrate by plasma-enhanced chemical vapor deposition (PECVD) and their water vapor transmission rates (WVTR) were tested. propane was used as precursors. To make a polymer-like amorphous carbon film the deposition rate, surface roughness, light transmittance, and WVTR of the films were characterized as a function of the precursor feed ratio and plasma power. The water vapor transmission rates of bare PEN film and single layer PAC on PEN substrate were 6.95 g/m2/day and 0.3 g/m2/day, respectively. The superior property the water vapor permeability of thin layers of PAC was attributed to uniform coverage and good adhesion between PAC film and PEN substrate.

  • PDF

FDTD 시뮬레이션을 이용한 육방정계형 2차원 광자결정에서의 광자밴드갭 특성 정규화 (Normalized characteristics of the photonic bandgaps in two-dimensional photonic crystals with a hexagonal lattice by FDID simulation)

  • 여종빈;이현용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.38-38
    • /
    • 2009
  • Characteristics of the photonic bandgaps (PBGs) in two-dimensional photonic crystals (2D PCs) with a hexagonal lattice have theoretically studied using a finite difference time domain (FDTD) simulation. In this research, we propose a concept of optical coverage ratio (OCR) as a new structural parameter to determine the PBGs for E-polarized light. The OCR is an optically compensated filling factor. It is possible to normalize the PBGs of 2D PCs by introducing the OCR.

  • PDF

공역에서의 NDGPS 신호 전계강도 측정 연구 (In-Flight Field Strength Measurement of KNDGPS)

  • 안재형;유병선;강자영
    • 한국항공운항학회지
    • /
    • 제18권2호
    • /
    • pp.1-8
    • /
    • 2010
  • In order to determine the possibility of using NDGPS signals for flight operations, in-flight measurements of signals transmitted from various ground reference stations(RS) were conducted along the air routes of South Korea. Signal strength and signal to noise ratio(SNR) data were collected along domestic flight routes and recorded with time. By using three-dimensional geographical position data of the aircraft, signal strength data of en-route position were calculated and used to obtain scatter-plot of signal strength. These results were used to outline the effective coverage and field strength hemispheres of the selected DGPS signals.

Fabrication of Sputtered Gated Silicon Field Emitter Arrays with Low Gate Leakage Currents by Using Si Dry Etch

  • Cho, Eou Sik;Kwon, Sang Jik
    • Transactions on Electrical and Electronic Materials
    • /
    • 제14권1호
    • /
    • pp.28-31
    • /
    • 2013
  • A volcano shaped gated Si-FEA (silicon field emitter array) was simply fabricated using sputtering as a gate electrode deposition and lift-off for the removal of the oxide mask, respectively. Due to the limited step coverage of well-controlled sputtering and the high aspect ratio in Si dry etch caused by high RF power, it was possible to obtain Si FEAs with a stable volcano shaped gate structure and to realize the restriction of gate leakage current in field emission characteristics. For 100 tip arrays and 625 tip arrays, gate leakage currents were restricted to less than 1% of the anode current in spite of the volcano-shaped gate structure. It was also possible to keep the emitters stable without any failure between the Si cathode and gate electrode in field emission for a long time.

B2O3-P2O5-SiO2 계 박막유리의 화학증착 및 물성에 관한 연구 (A Study on the Chemical Vapor Deposition of BPSG and its Thin Film Properties)

  • 김은산;양두영;김동원;김우식;최민성
    • 한국세라믹학회지
    • /
    • 제28권7호
    • /
    • pp.517-524
    • /
    • 1991
  • The CVD process of BPSG (BoroPhosphoSilicate Glass) and its thin film properties were studied. B2H6, PH3, SiH4 and O2 gases were reacted in a AP (Atmospheric Pressure) CVD system in the temperature range of 300℃ and 460℃. The interaction of B2H6 and PH3 was studied from the deposition rate and dopant incorporation change point of view. The dependency of BPSG step coverage on the temperature was changed with different O2/(B2H6+PH3+SiH4) ratio. Finally, the boundary which distinguishes the stable BPSG's from the ones that react with Di (Deionized) water or cleaning chemicals such as H2SO4, HCl, H2O2, NH4OH etc could be defined.

  • PDF

ALD법으로 성장시킨 $Al_2$O$_3$ 박막의 특성분석 (Characteristic Analysis of $Al_2$O$_3$Thin Films Grown by Atomic Layer Deposition)

  • 성석재;김동진;배영호;이정희
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.185-188
    • /
    • 2001
  • In this study, $Al_2$O$_3$films have been deposited with Atomic Layer Deposition(ALD) for gate insulator for MPTMA and $H_2O$ at low temperature below 40$0^{\circ}C$ . Conventional methods of $Al_2$O$_3$thin film deposition have suffered from the poor step coverage due to reduction of device dimension and increasing contact/via hole aspect ratio. ALD is a self-limiting growth process with controlled surface reaction where the growth rate is only dependent on the number of growth cycle and the lattice parameter of materials. ALD growth process has many advantages including accurate thickness control, large area and large batch capability, good uniformity, and pinholes freeness.

  • PDF

Cross-layer Optimized Vertical Handover Schemes between Mobile WiMAX and 3G Networks

  • Jo, Jae-Ho;Cho, Jin-Sung
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제2권4호
    • /
    • pp.171-183
    • /
    • 2008
  • Nowadays, wireless packet data services are provided over Wireless MAN (WMAN) at a high data service rate, while 3G cellular networks provide wide-area coverage at a low data service rate. The integration of mobile WiMAX and 3G networks is essential, to serve users requiring both high-speed wireless access as well as wide-area connectivity. In this paper, we propose a cross-layer optimization scheme for a vertical handover between mobile WiMAX and 3G cellular networks. More specifically, L2 (layer 2) and L3 (layer 3) signaling messages for a vertical handover are analyzed and reordered/combined, to optimize the handover procedure. Extensive simulations using ns-2 demonstrate that the proposed scheme enhances the performance of a vertical handover between mobile WiMAX and 3G networks: low handover latency, high TCP throughput, and low UDP packet loss ratio.

Vertical Diffusion of Ammonia Into Amorphous Ice Sturcture

  • 김영순;문의성;강헌
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.280-280
    • /
    • 2012
  • We examined ammonia diffusion on the surface of amorphous ice film through the measurement of decreasing residual quantity of $NH_3$ molecules compared to $H_2O$. The populations of $NH_3$ molecules on the surface of amorphous ice were monitored by using the techniques of temperature programmed reactive ion scattering (TPRIS) method. The ratio of intensity between ammonia and water was examined as a function of time at controlled temperature. When ammonia molecules were externally added onto an ice film at a temperature of 80 K, ammonia coverage with regard to ice was 0.12-0.16 ML. The intensity of ammonia molecules on the surface of ice decreased as time increased and the extent of decreased intensity of ammonia increased as controlled temperature increased. Moreover, energy barrier was estimated to be $51kJmol^{-1}$ on amorphous ice film. The results of the experiment indicate that ammonia molecules have a property of vertical diffusion into amorphous ice and the energy barrier of ammonia diffusion into bulk of ice is higher than that of hydrogen bonding.

  • PDF