• 제목/요약/키워드: coupling behavior

검색결과 549건 처리시간 0.022초

접합부 상세에 따른 복합 병렬 전단벽 시스템의 구조 성능 (Structural Performance of Hybrid Coupled Shear Wall System Considering Connection Details)

  • 박완신;윤현도;김선웅;장영일
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권3호
    • /
    • pp.128-137
    • /
    • 2012
  • 복합 병렬 전단벽(Coupled shear walls)은 커플링 보와 철근콘크리트 벽체로 구성되어 바람이나 지진 등의 횡하중으로부터 유발된 전도모멘트의 상당 부분을 철골 연결보의 커플링 작용에 의하여 골조 작용(Frame action)을 의하여 횡력에 효율적으로 저항하게 된다. 본 연구에서는 접합부 상세에 따른 복합병렬 전단벽의 접합부 강도에 대한 규준식을 정립하기 위한 선행연구로서 병렬 전단벽 접합부에서 커플링 보의 매립길이 및 벽체 두께를 주변수로 실험적 연구를 수행하여 접합부 상세에 따른 복합 병렬 전단벽 시스템의 거동특성을 규명하고자 하였다. 본 실험결과, 실험체의 거동 및 내력은 매립길이 및 접합부 상세에 많은 영향을 받는 것으로 나타났으며 향후 설계시 이에 대한 영향을 반영해야 할 것으로 판단된다.

FBP가 설치된 철골 커플링보 접합부의 거동 및 파괴모드 (Behavior and Failure Mode of Steel Coupling Beams Joint with FBP)

  • 송한범;이원호
    • 콘크리트학회논문집
    • /
    • 제17권6호
    • /
    • pp.1001-1009
    • /
    • 2005
  • 고층 건물의 구조계획에서 벽체의 유용성은 오래전부터 인식되어 왔다. 구조물에서 적절한 위치에 벽체를 배치하며, 벽체는 구조물에 작용하는 횡하중에 매우 효과적으로 저항할 수 있다. 특히 병렬 전단벽 시스템의 구조물의 횡력저항 시스템으로서 가장 선호되는 구조이고 이러한 구조는 커플링보에 의해 벽체가 연결되게 된다. 커플링보는 강도, 강성, 연성 및 에너지 소산능력이 충분한 부재이어야 한다. 이러한 요구들을 만족시키기 위해 FBP를 적용한 철골 커플링보를 제안한다. FBP의 적용 여부를 변수로 하여 총 2개의 시험체를 계획하고 실험을 실시하였다. 이러한 실험 연구를 통하여 FBP를 적용한 철골 커플링보의 장점에 대해 서술하였고, 파괴모드를 제안하였다.

화강암반내 단층지역에 위한 지하 방사성폐기물 처분장 인접지역에서의 열-수리-역학적 연성거동 비교 연구 (A comparison study on coupled thermal, hydraulic, and mechanical interactions associated with an underground radwaste repository within a faulted granitic rock mass)

  • 김진웅;배대석;강철형
    • 지질공학
    • /
    • 제11권3호
    • /
    • pp.255-267
    • /
    • 2001
  • 지하 50m의 화강암반내 단층지역에 위치한 지하 방사성폐기물 처분장 인접지역에서의 열, 수리, 및 역학적 연성거동을 비교하고 분석하였다. 해석에는 2차원 해석코드인 UDEC을 사용하였다. 해석모델은 화강암반, 처분공내의 압축 벤토나이트로 둘러싸인 PWR 사용후 핵연료 처분용기, 및 처분동굴내에 채워진 혼합 벤토나이트를 포함한다. 수리-역학적, 열-역학적, 및 열-수리-역학적 연성거동을 비교 및 분석하였다. PWR 사용후 핵연료내의 방사성 물질로부터 나오는 시간의존 방사성 붕괴열이 처분장 및 인접지역에 미치는 영향을 분석하였다. 수리해석에는 steady state flow 알고리즘을 사용하였다.

  • PDF

세라믹 VCO의 Block 특성 분석을 통한 주파수 튜닝 (The Tuning of Oscillation Frequency by the Analysis of Characteristics of each Block in Ceramic VCO)

  • 유찬세;이우성
    • 마이크로전자및패키징학회지
    • /
    • 제11권2호
    • /
    • pp.49-52
    • /
    • 2004
  • 세라믹 모듈 내부에 내장되는 인덕터와 캐패시터와 같은 수동소자들은 주변 소자 및 패턴의 영향으로 모듈 내부에서는 변형된 특성을 갖게 된다. 이 때문에 수동소자들의 특성을 모듈내부에 내장된 상태로 추출하는 것이 가장 정확하다. 본 연구에서는 세라믹 VCO를 개발함에 있어서 전체 회로를 공진부와 발진부로 나누어서 각 block의 특성을 측정하였고 이를 통해 VCO의 고주파수 거동을 예측하여 개발에 활용할 수 있도록 하였다.

  • PDF

Pt Thickness Dependence of Oscillatory Interlayer Exchange Coupling in [CoFe/Pt/CoFe]/IrMn Multilayers with Perpendicular Anisotropy

  • Lee, Sang-Suk;Choi, Jong-Gu;Kim, Sun-Wook;Hwang, Do-Guwn;Rhee, Jang-Roh
    • Journal of Magnetics
    • /
    • 제10권2호
    • /
    • pp.44-47
    • /
    • 2005
  • The oscillatory interlayer exchange coupling (IEC) has been shown in pinned $[CoFe/Pt(t_{pt})/CoFe]/IrMn$ multi-layers with perpendicular anisotropy. The period of oscillation corresponds to about 2 monolayers of Pt. The oscillatory behavior of IEC depending on the nonmagnetic metallic Pt thickness is thought to be related the antiferromagnetic ordering induced by IrMn layer. Oscillatory IEC as function of insulating NiO thickness has been observed in $[Pt/CoFe]_4/NiO(t_{NiO})/[CoFe/Pt]_4$ multilayers. The effect of N (number of bilayer repeats) upon the magnetic property of [Pt/CoFe]N/IrMn is also studied.

세라믹 VCO 내 Block 특성 분석 (The analysis of monoblock characteristics in ceramic VCO)

  • 유찬세;김경철;이영신;이우성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
    • /
    • pp.269-272
    • /
    • 2003
  • Nowadays, the study on the ceramic components and modules using LTCC is being performed and on the passives included in modules is being done also. But the characteristics of passives changes in ceramic module due to the coupling between patterns, so each block in module must be analyzed in the state of module including coupling factors. In our research each block of VCO, resonator part, oscillator part, output part is measured and analyzed and that allows the prediction of behavior of VCO.

  • PDF

CORE AND SUB-CHANNEL EVALUATION OF A THERMAL SCWR

  • Liu, Xiao-Jing;Cheng, Xu
    • Nuclear Engineering and Technology
    • /
    • 제41권5호
    • /
    • pp.677-690
    • /
    • 2009
  • A previous study demonstrated that the two-row fuel assembly has much more favorable neutron-physical and thermal-hydraulic behavior than the conventional one-row fuel assemblies. Based on the newly developed two-row fuel assembly, an SCWR core is proposed and analyzed. The performance of the proposed core is investigated with 3-D coupled neutron-physical and thermal-hydraulic calculations. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a sub-channel analysis code and the neutron-physical performance is computed with a 3-D diffusion code. This paper presents the main results achieved thus far related to the distribution of some neutronic and thermal-hydraulic parameters. It shows that with adjustment of the coolant and moderator mass flow in different assemblies, promising neutron-physical and thermal-hydraulic behavior of the SCWR core is achieved. A sensitivity study of the heat transfer correlation is also performed. Since the pin power in fuel assemblies can be non-uniform, a sub-channel analysis is necessary in order to investigate the detailed distribution of thermal-hydraulic parameters in the hottest fuel assembly. The sub-channel analysis is performed based on the bundle averaged parameters obtained with the core analysis. With the sub-channel analysis approach, more precise evaluation of the hot channel factor and maximum cladding surface temperature can be achieved. The difference in the results obtained with both the sub-channel analysis and the fuel assembly homogenized method confirms the importance of the sub-channel analysis.

두 이동질량이 단순지지 유체유동 파이프의 동특성에 미치는 영향 (Influence of Two Moving Masses on Dynamic Behavior of a Simply Supported Pipe Conveying Fluid Flow)

  • 윤한익;임순홍;유진석
    • 한국소음진동공학회논문집
    • /
    • 제13권8호
    • /
    • pp.605-611
    • /
    • 2003
  • A simply supported pipe conveying fluid and two moving masses upon it constitute this nitration system. The equation of motion is derived by using Lagrange's equation. The influence of the velocities of two moving masses, the distance between two moving masses, and the velocities of fluid flow in the pipe have been studied on the dynamic behavior of a simply supported pipe by numerical method. The velocities of fluid flow are considered with in its critical values of a simply supported pipe without moving masses upon It. Their coupling effects on the transverse vibration of a simply supported pipe are inspected too. As the velocity of two moving masses increases, the deflection of a simply supported pipe is increased and the frequency of transverse vibration of a simply supported pipe is not varied. In case of small distance between two masses, the maximum deflection of the pipe occur when the front mass arrive at midspan. Otherwise as the distance get larger, the position of the front masses where midspan deflection is maximum moves beyond the midpoint of a simply supported pipe. The deflection of a simply supported pipe is increased by coupling of the velocities of moving masses and fluid flow.

간극공기압을 고려하는 불포화토의 유한요소해석 (Finite Element Analysis of Partially Saturated Soil Considering Pore-air Pressure)

  • 김재홍;황영철
    • 한국지반공학회논문집
    • /
    • 제27권3호
    • /
    • pp.95-102
    • /
    • 2011
  • 불포화 지반을 이루고 있는 흙의 알갱이, 물과 공기의 연계해석이 전체 지반의 변형에 미치는 영향을 알아보고자, 흙 알갱이와 물의 두 가지 요소로 해석되어지는 기존 관점과의 차이를 분석하고 그에 대한 원인을 비교하였다. 열역학적 가정을 토대로 평형방정식을 이용하여 불포화토 거동을 지배하는 물과 공기의 흐름 관계를 유한요속해석을 위한 수학적인 알고리즘을 유도하여 배수시험 수치해석을 통해 기존 문헌과 비교 검증하였다. 3상으로 이루어진 불포화토 거동을 통해서 흙의 알갱이와 물과의 상호작용에서 공기압의 역할을 분석하여 불포화 지반 내에 물과 공기의 두가지 흐름에 대해 지반공학적인 적용성을 알아보았다.

단순지지 송수관의 동특성에 미치는 이동질량의 영향 (Influence of a Moving Mass on Dynamic Behavior of a Simply Supported Pipe Conveying Fluid)

  • 윤한익
    • 한국해양공학회지
    • /
    • 제15권2호
    • /
    • pp.135-140
    • /
    • 2001
  • A simply supported pipe conveying fluid and a moving mass upon it constitute a vibrational system. The equation of motion is derived by using Lagrange's equation. The influence of the velocity and the inertia force of a moving mass and the velocities of fluid flow in the pipe have been studied on the dynamic behavior of a simply supported pipe by numerical method. The velocities of fluid low are considered within its critical values of the simply supported pipe without a moving mass upon it. Their coupling effects on the transverse vibration of a simply supported pipe are inspected too. as the velocity of a moving mass increases, the deflection of midspan of a simply supported pipe conveying fluid is increased and the frequency of transverse vibration of the pipe is not varied. Increasing of the velocity of fluid flow makes the frequency of transverse vibration of the simply supported pipe conveying fluid decrease and the deflection of midspan of the pipe increase. The deflection of the simply supported pipe conveying fluid is increased by a coupling of the moving mass and the velocities of a moving mass and fluid flow.

  • PDF