• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2007

There are many risks in constructing tunnel-structure. To prevent these risks from occurring and secure safety, the precise and rapid survey of inside displacement of the tunnel is required. But nowadays the measurement of the crown settlement, convergency, and surface settlement depends on general kinds of method which use total station or level. In the way to provide data about maintaining structure according to recent improvement and progress of measuring technology, 3D laser scanning is used. It solves the problem of reliability in measuring displacement of existing structure, provides material that enables to estimate shape change of structure visually, and makes it possible to deliberate speedy countermeasure. By this three dimensioning it is possible to make efficient use of structure maintenance and field measurement.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.65-72
• /
• 2014

Sensor nodes are easily compromised by attacker when which are divided in open environment. The attacker may inject false report and false vote attack through compromised sensor node. These attacks interrupt to transmission legitimate report or the energy of sensor node is exhausted. PVFS are proposed by Li and Wu for countermeasure in two attacks. The scheme use inefficiency to energy of sensor node as fixed report threshold and verification node. In this paper, our propose the next neighbor node selection scheme based on fuzzy logic system for energy improvement of PVFS. The parameter of fuzzy logic system are energy, hops, verification success count, CH select high the next neighbor node among neighbor nodes of two as deduction based on fuzzy logic system. In the experimental, our proposed scheme was improvement to energy of about 9% compare to PVFS.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.3
• /
• pp.165-173
• /
• 2016

Objective: The objective of this research is to inquire about safety information from the standpoint of its usefulness to suggest the significance of the Reactive Safety Action Program, which serves to promote aviation safety culture. Background: Safety information plays an important role in operating safety programs. Each organization learns lessons from safety information collected from aviation accidents and incidents. When an accident occurs, it is only through safety investigation and a close inquiry on the cause that we can come up with an appropriate countermeasure which would contribute to preventing the recurrence of the same or similar accident. However, the usefulness of safety information produced from unsatisfactory safety investigation is insufficient. Method: This research analyzed the characteristics of aviation accidents, the differences between safety investigations and legal accident investigations in systematic and operative perspectives, and safety culture as a measure to activate reporting systems (compulsory/voluntary). Results: This research defined the investigation scope and processes of safety investigations and legal accident investigations. It also suggested factors such as just culture based on trust, non-punitiveness, confidentiality, the participation of the entire staff through the use of inclusive reporting base, ensuring the independence of the operating organization as a way to promote safety through reporting systems. Conclusion: The organization's effort is the important aspect in obtaining exact and accurate safety information from accidents/incidents. The separate running of SIB (Safety Investigation Board) and AIB (Accident Investigation Board), the systematization of safety information reporting system, and prescribing (legislating) the composition of related organizations are some representative programs. Application: This research inquired experiences that contributed in promoting aviation safety culture in a reactive perspective, and will serve a role in spreading safety culture by enabling the use of application experiences of the aviation field in other domains.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.473-492
• /
• 2016

Objective: This paper discusses the recent challenges to human factors engineering due to the safety culture. Background: As incidents occurring in specific fields such as logistics, plant, energy and medical sectors in Korea, as well as in the public sectors including railway, road, aviation and shipping, are recently raised as social issues from the disaster dimension, those incidents are dealt with as man-made disasters in many cases. The trend regarding all accidents as man-made disasters has been expanded in the active perspective that the controllability of all incidents should be ensured in technology development, due to change from a fatal point of view regarding disasters as random occurrence of uncertainties in the past. Method: Man-made disasters are concluded as human errors, and safety culture stands out as a cause of human errors or a new cause item recently. Because safety culture, however, is a very comprehensive term, of which true nature is obscure, although many definitions of safety culture have been presented, the safety culture may make avoid the true nature and responsibility of an incident, or make the main player and subject obscure. Raising safety culture as a cause without presenting a specific countermeasure will be just a wisdom of hindsight. Results and Conclusion: This study reviews the fundamental discussions on "Is safety culture a task of human factors engineering?" and the existing approach carried out from various perspectives in order to seek an effective approach on the new task of safety culture in the human factors engineering field. This study discusses an engineering approach to meet a precondition that safety culture is not just an added factor through a review of the approaches in the proactive fields such as nuclear power and aviation, and the traditional approaches of human factors engineering. Application: This study especially defines the perspective of socio-technological system that has expanded the existing man-machine system, and discusses a systemic approach embracing various interactions, and several overriding tasks.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.84-89
• /
• 2018

The number of landslides has increased since the 2000s due to the increased frequency of heavy rainfall caused by abnormal weather. A variety of debris flow prevention facilities have been installed as a countermeasure against this problem. However, it is not easy to evaluate the efficiency of debris flow prevention structures except for the structures with constant volume such as the erosion dam, because the other structures are limited to be reproduced in simulation program for debris flow. Therefore, the methods by which the debris flow prevention structures were modeled were proposed, and the efficiency of four prevention structures installed in Baekyang Mt. in Busan was evaluated with UDS, which accuracy had been verified, using these methods. The initial amount of debris flow was determined based on landslide which occurred in 2014, and specifications of the complex retaining walls around the settlements were measured and applied modeling for terrain. The numerical results showed that the efficiency of debris flow prevention structures could be quantitatively presented. Among the debris flow prevention structures installed in Baekyang Mt., prevention structure of barrier type for debris flow was the most efficiency and debris flow prevention device was the lowest efficiency when the only depth of debris was evaluated. It seems that this study is meaningful to propose the methods which were used to model the debris flow prevention structures that could not be reproduced in most 2D debris flow numerical analysis programs. If precise verification of the presented methods is carried out, it will be possible to provide clear criteria for the efficiency evaluation method of disaster prevention structures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.1
• /
• pp.1-15
• /
• 2020

As differential computation analysis attack(DCA) which is context of side-channel analysis on white-box cryptography is proposed, masking white-box cryptography based on table encoding has been proposed by Lee et al. to counter DCA. Existing higher-order DCA for the masked white box cryptography did not consider the masking implementation structure based on table encoding, so it is impossible to apply this attack on the countermeasure suggested by Lee et al. In this paper, we propose a new higher-order DCA method that can be applied to the implementation of masking based on table encoding, and prove its effectiveness by finding secret key information of masking white-box cryptography suggested by Lee et al. in practice.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.431-439
• /
• 2017

This study was conducted for the purpose of providing help to preparation of preventive intervention plans on job stress and the quality of life by investigating how resilience affects the relationship between job stress and the quality of life of the employed mentally disabled. As for the methods, this study collected materials by combining mail survey and visiting survey through a self-administered method targeting 113 mentally disabled who have been cared at community psychiatric rehabilitation centers in Seoul and Gyeonggi, and been employed for more than 3 months after the researcher of this study gave explanation to and asked for consent to the staffs of the centers. Study results show that job stress perceived by the employed-disabled exerts a significant influence on the quality of life, and resilience have a significant mediating effect between job stress and the quality of life. Through the above results, this study showed a possibility to apply resilience of the employed mentally disabled as an internal countermeasure, suggesting a comprehensive intervention plan for lowering job stress and improving the quality of life.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.201-207
• /
• 2017

Failure of the power apparatus causes many inconveniences and problems due to power outage in all places using power such as industry and home. The main causes of faults in the Power Apparatus are aging, natural disasters such as typhoons and earthquakes, and animals. At present, the long high temperature status is monitored only by the assumption that a fault occurs when the temperature of the power apparatus becomes higher. Therefore, it is difficult to cope with the failure of the power apparatus at the right time. In this paper, we propose a power apparatus monitoring system as an efficient countermeasure against general faults except for faults caused by sudden natural disasters. The proposed monitoring system monitors the power apparatus in real time by attaching a thermal sensor, collects the monitored data, and predicts the failure using the accumulated information through learning using the artificial neural network. Through the learning and experimentation of artificial neural network, it is shown that the proposed method is efficient.

• Geotechnical Engineering
• /
• v.11 no.4
• /
• pp.111-124
• /
• 1995

On development of mountaneous or hilly area, stability of cut slope should be provided to prevent undesirable landslides. When piles are used as a countermeasure to stabilize existing landslide, stabilities for both piles and slope should be simultaneously satisfied to obtain the whole stability of the slope reinforced by piles. In order to confirm the effect of stabilizing piles on slope stabilization, it is necessary to investigate the behavior of the slope, in which the piles are installed. In this paper, first, the countermeasures used commonly to control unstable slope in Korea were summerized systematically. Nezt, the behavior of piles and slope soil was investigated by instrumentation installed into a cut slope for an apartment stabilized by a row of piles. Instrumentation could present sufficient effect of piles on slope stabilization Construction works in front of the row of piles affected the displacement of piles and slope. The construction works were divided into four stages, i.e. initial cutting stage of slope, excavation stages for retaining wall and parking space, and construction of retaining wall. As the result of research, the applicability of the proposed design method could be confirmed sufficiently.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.150-156
• /
• 2008

Recently life and properties damage at Japan and China by generating earthquake. For establishing measure for earthquake in domestic, earthquake disaster measure law was enacted on March, 2008 from a natural disaster of earthquake and present the detail part and enforce the measures. This paper analyzes domestic site and problems of electrical facility earthquake measures at transformer vault which the power supply the emergence situation at generating earthquake. Also we present the domestic seismic design and construction direction from research and analysis related law and regulation for the seismic design and construction in domestic and foreign for electrical facility. Afterward we will need to study reliability inspection for electrical facility seismic design method and construction at buildings transformer vault.