• Journal of Microbiology and Biotechnology
• /
• 제19권1호
• /
• pp.93-98
• /
• 2009

The thermophilic aerobic digestion (TAD) process is recognized as an effective method for rapid waste activated sludge (WAS) degradation and the deactivation of pathogenic microorganisms. Yet, high energy costs due to heating and aeration have limited the commercialization of economical TAD processes. Previous research on autothermal thermophilic aerobic digestion (ATAD) has already reduced the heating cost. However, only a few studies have focused on reducing the aeration cost. Therefore, this study applied a two-step aeration control strategy to a fill-and-draw mode semicontinuous TAD process. The NADH-dependent fluorescence was monitored throughout the TAD experiment, and the aeration rate shifted according to the fluorescence intensity. As a result, the simple two-step aeration control operation achieved a 20.3% reduction in the total aeration, while maintaining an effective and stable operation. It is also expected that more savings can be achieved with a further reduction of the lower aeration rate or multisegmentation of the aeration rate.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.178-185
• /
• 1999

Minimum life-cycle cost helps to evaluate cost effectiveness of base-isolated bridges under specific condition. Life-cycle cost mainly consists of the initial construction cost and the expected damage cost. Damage cost estimation needs proper model of input ground motion failure probability evaluation method and limit states definition. We model the input ground motion as spectral density function compatible with the response spectra defined at each seismicity and site condition. Spectrum analysis and crossing theory is suitable for reseating calculation of failure probabilities in the process of cost minimization. Limit states of base-isolated bridges re defined for superstructure isolator and pier respectively The method is applied to both base-isolated bridges and conventional bridges under the same conditions to investigate cost effectiveness of base isolation in low and moderate seismic region. the results show that base-isolation of bridges are more effective in low and moderate seismic region and that the site effects on the economical efficiency may not be negligible in such a region.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.277-283
• /
• 2005

Formability simulation of automotive panels at early design phases can reduce product and tooling development time and cost. However, for the simulation to be effective in leading the design process, fast and reliable results should be achieved with limited design definition and minimum modeling effort. In this paper, nonlinear finite element analysis is used to develop an automated process for the formability simulation of automotive body panels at early design phases. Due to the limited design definition at early design phases, the automated simulation process is based on the plane strain analysis for selected number of typical sections along the panel. Therefore, an entire panel can be analyzed with few sections. The state of plane strain can be easily induced, during simulation through symmetry and applied boundary conditions that simplify the modeling process. To study the reliability and effectiveness of the developed simulation process, the analytical results are compared with measured results of production automotive body side panels. The comparison demonstrates that the developed simulation process is reliable and can be effective for analyzing sheet metal formability, in early vehicle development phases.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.199-200
• /
• 2006

PM recent developments focus on increasing this technology's competitiveness when compared to wrought materials. Warm compaction allows the replacement of a double press double sinter process with a single warm press and sintering step, thus allowing cost and time savings. Moreover there are added benefits to consider such as reducing work in process and lessening part's logistics cost. This paper presents a successful industrial trial to replace a double press-double sinter process with a warm die compaction and sintering process. The part chosen was a high performance gear containing 0,9% wt. carbon. Sintering was conducted in a belt furnace at $1120^{\circ}C$ in a nitrogen rich atmosphere with rapid cooling process in order to obtain a quasi fully martensitic structure with a minimum of 700HV0,1 and 450HV10 after annealing. The balance between properties and cost is favoured by the use of a singular lubricant developed in a Eureka frame project together with POMETON S.A. and die warm compaction. Warm compaction is only needed to be effective on the gear teeth, in order to achieve the required properties. Therefore only the die is actually heated. This simplified system avoids flow rate problems typically involved when using more elaborate warm compaction equipments.

• 산업경영시스템학회지
• /
• 제31권2호
• /
• pp.36-42
• /
• 2008

As competition shifts from being a company oriented one to a supply chain oriented, an effective SCM(supply chain management) becomes a necessary strategy for any successful businesses. But, it is not easy to form a successful SCM, because the individual desire of participants conflict with others. These desires affect the performance of SCM and cause waste of cost and time. Analyzing a supply chain of discount retailers, this paper eliminates idle time and improves the process with rearranging the reorder closing time(reorder point). For win-win strategy, this work reveals the reorder closing time is an important factor. It is possible to reduce cost and time on the entire SCM process by just changing the ordering time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.540-545
• /
• 2002

The tight integration of the part design and process planning is very effective to high quality product development and cost effective manufacturing. Moreover, the integration in the early design stage, that is, the integration of the conceptual design and the conceptual process planning may take a big impact with the forecasting the alternative of the design and manufacturing. In this paper, the real field parts are studied about the relations among the Feature, Function, and Manufacturing Process taking the style of reverse engineering method, to found the base of the systematic computer system for the integrated product design and manufacturing process planning.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.103-110
• /
• 2009

Recently, maintenance of public rental housing becomes a critical issue because its expenditure possesses the majority proportion of life cycle cost. The countries, such as USA and Singapore, have introduced the approaches for advanced property management, which are cost-effective in the maintenance management. However, as maintenance management system becomes advanced, risks associated with its application are also increased. Therefore, it is needed to assess the appropriate applicability of public rental housing maintenance management considering the constrains in domestic construction industry. The main objective of this study are to investigate international cases and systems and to propose strategic introduction, which satisfies the regulations and policies for domestic public rental housing. In order to evaluate the suitability of the investigated systems, practitioners' opinions were reviewed through the questionnaire surveys using analytic hierarchy process (AHP). The surveys indicate that advanced asset management was the suitable process for managing efficiently domestic public rental housing. Moreover, the results showed each weights of considerable criteria for assessing the effective application of maintenance management, and would contribute to further detailed and systematic management.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.30-36
• /
• 1995

Conventionally design for multi-stage cold forging depends on the designer's experience and decision-making. Due to such non-deterministic nature of the process sequence design, a flexible inference engine is needed for process design expert system. In this study, A* searching algorithm was introduced to arrive at the vetter process sequence design considering the number of forming stages and levels of effective strain, effective stress, and forming load during the porcess. In order to optimize the process sequence in producing the final part, cost function was defined and minimized using the proposed A* searching algorithm. For verification of the designed forming sequences, forming experiments and finite element analyses were carried out in the present investigation. The developed expert system using A* searching algorithm can produce a flexible design system based on changes in the number of forming stages and weights.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.107-112
• /
• 2017

The purpose of this study was to develop an extractor to improve the effective ingredient of propolis. In order to improve the performance of conventional alcohol extraction at room temperature, a striking-type extractor used with a sprayed mist (alcohols, 95% alcohol) was developed for use at $40^{\circ}C$. Extraction of the effective ingredient of propolis was tested, and the resulting material was analyzed using a device. The extraction test of the mist spraying method indicated that the level of flavonoid was 1.56%, which is 1.5 times the 1.04% shown in existing data from a conventional stirred extractor. In addition, the extraction time can be reduced by half and the cost reduced by about 12.7% per year. It is confirmed that the extractor developed with a sprayed mist (alcohols, 95% alcohol) appears effective at the low temperature.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.95-106
• /
• 2005

Many Korean companies are challenged to reduce logistics cost and meet environmental-friendly logistics. The textile companies in harsh competition are requested to make improvement on their logistics environment to cut down the total cost. However, they have reached the limit on improving the manufacturing process. We believe that the logistics department is the most improvable part at present. Improving logistics will be highly effective to cut down the total cost. In this study, we present Pad Pool System(PPS) as the solution to save their logistics cost. PPS, which means the shared use of Styrofoam pads, will enable the textile companies to cut down their cost and strengthen enterprise competitiveness. Also, PPS will be helpful reducing environmental disruption because the system reuses retrieved Styrofoam pads many times.