• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.10-22
• /
• 2011

Human health risk assessment for petroleum, oil and lubricant (POL) contaminated sites is challenging as total petroleum hydrocarbon (TPH) is not a single compound but rather a mixture of numerous substances. To address this concern, several TPH fractionation approaches have been proposed and used as an effective management tool for the POL-contaminated sites in many countries. In Korea, there are also recognized needs to establish a reliable and cost-effective human health risk assessment strategy based on the TPH fractionation method. In order to satisfy the social and institutional demand, this study suggested that the comprehensive risk assessment strategy based on a newly modified TPH fractionation method with 10 fractions, the Korean Standard Test Method (KSTM)-based analytical protocol and a stepwise risk assessment framework should be introduced into the domestic contaminated land management system. Under the proposed strategy, POL-contaminated sites can be effectively managed in terms of human health protection, and remedial cost and time can be determined reasonably. In addition, more researches required to increase our understanding of environmental risks and improve the domestic management system were proposed.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.204-212
• /
• 2022

Recently, the Korean government has been actively promoting the smart city as their strategic agenda. However, to build smart cities that are greener, the authors believe it is essential to rapidly transit conventional energy sources such as fossil fuels to renewable energy. Although there is a big potential for Offshore wind in Korea, there has not been a full-scale commercial offshore wind farm until today. Since Korea is relatively a new market compared to the EU, it can be risky for developers. The authors will introduce risk management best practices in the offshore wind industry applicable to the Korean environment. This paper will mainly introduce an offshore wind project size of 99 MW. The project is expecting a Finance Close (FC) in Q3 2022, so the project team has prepared a risk register with over 150 risks and levers throughout the project lifecycle. Overall risks include risks with Development Expenditure (DEVEX) impact, a Capital Expenditure (CAPEX) impact, and an Operating Expenditure (OPEX) impact. Based on the identified risks, a more qualitative assessment of Cost and Schedule Impact was conducted. In conclusion, a Monte Carlo simulation was performed to propose a quantitative risk assessment to evaluate a benchmark contingency of the project cost.

• International Journal of Quality Innovation
• /
• v.7 no.3
• /
• pp.24-45
• /
• 2006

In recent years, the labor consciousness is gradually valued. During the process of pursuing sustainable operation, the enterprises treat occupational hazard risk as the waste of cost. The purpose of OHSAS 18000 occupational security and health management system is to systematically establish the business managerial measures in terms of occupational security and calamity prevention. This research proceeded with questionnaire analysis with respect to the relationship between the OHSAS 18000 system implementation and competitiveness in Taiwan's industries. The research result revealed that there was significant relationship between Taiwan firms' execution of OHSAS 18000 system and industry competitiveness. Thus, the enterprises can decide the proper managerial plans according to the result of their own risk evaluation to prevent the happening of accidents and reduce the operational cost. They can thus completely control business occupational hazard risk through "systematic" management.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.65-72
• /
• 2001

With the recent rising project complexities and competitive environments in the construction projects, a risk management is recognized as more important management tool than the others. However, as most risk management techniques applied to the construction projects are centered around their initial phases and risk analyses, they are not developed into general project management technique such as time management, cost management and quality management, etc., that are usually applied in the process of construction. Thus, this paper proposes a response process to construction project risks based on the risk threshold and its calculation methodology applying a concept of VaR to establish risk management as general management technique in the construction projects.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.13-24
• /
• 2022

Construction projects are exposed to various types of risks, which tend to increase. The increasing risks call for contractors' more attentions to forecasting and dealing with these risks. One of the measures to deal with contractors' risks is to forecast or estimate risk cost and include it in the construction budget. Although various researches in relation to risk cost have been observed, little attention has been paid to general contractors' perceptions and current practices in estimating risk cost of construction budget. The objective of the study is to identify and discuss key characteristics and implications based on the survey and analysis of general contractors' perceptions and current practices in estimating risk cost of construction budget. The study shows that there is a gap between the perception and the practice of estimating risk cost, that is, high perception of the importance of risk cost and a relatively low level of practice. It suggests that historical cost data, guidelines and corporate-level standard procedures are required to improve the current practice in addition to sufficient time allocations for risk cost estimating. It discusses that there is a need for using sophisticated estimating techniques including bid data analytics despite a low level of the current adoption, and also proposes that research and development in the field of the sophisticated estimating techniques should be further implemented in order to increase their practicality.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.5
• /
• pp.475-480
• /
• 2023

Objectives: This study examined differences in health care spending and characteristics among older adults in Korea by high-cost status (persistently, transiently, and never high-cost). Methods: We identified 1 364 119 older adults using data from the Korean National Insurance Claims Database for 2017-2019. Outcomes included average annual total health care spending and high-cost status for 2017-2019. Linear regression was used to estimate differences in the outcomes while adjusting for individual-level characteristics. Results: Persistently and transiently high-cost older adults had higher health care spending than never high-cost older adults, but the difference in health care spending was greater among persistently high-cost older adults than among transiently high-cost older adults (US$20 437 vs. 5486). Despite demographic and socioeconomic differences between transiently high-cost and never high-cost older adults, the presence of comorbid conditions remained the most significant factor. However, there were no or small differences in the prevalence of comorbid conditions between persistently high-cost and transiently high-cost older adults. Rather, notable differences were observed in socioeconomic status, including disability and receipt of Medical Aid. Conclusions: Medical risk factors contribute to high health care spending to some extent, but social risk factors may be a source of persistent high-cost status among older adults in Korea.

• Plant Journal
• /
• v.7 no.3
• /
• pp.48-64
• /
• 2011

In this work, risks in EPC project for overseas power plant projects are analyzed and risk management methods are suggested to reduce cost and to shorten time. 79% of risks occurred in the engineering phase for S project located in South-East Asia. The impact scales of risks on major project objectives which are cost, time, scope, and quality are analyzed as 3.5, 3.8, 2.7, and 3.7, respectively. The level of impact scales is very similar to each other except the impact scale of scope. The risk management methods suggested in this study have to be applied at the appropriate time to manage risks effectively. After that, risks are managed continuously by monitoring.

• Journal of Korea Trade
• /
• v.23 no.5
• /
• pp.45-65
• /
• 2019

Purpose - As the well-known Structure-Conduct-Performance paradigm implies, risk structure of a corporation may affect its risk management activity and the activity may in turn determine its performance. Depending on its goal, Foreign Direct Investment (FDI) can shape its risk structure, risk management and its performance. Under this assumption, we investigate the relationship between the goals of FDI and risk management for the first time in academics. Design/methodology - This empirical research uses a survey of 279 current Korean enterprises' FDIs in China with the recently developed business risk quadrant model. Companies are classified into either a market- or an efficiency-seeking group, to identify how each group perceives and manages risks, and values the performance of risk management. Also, we apply integrated risk management method that multinational corporations have introduced in China, then verify the mediating effect between risk factors and performance. Findings - Our research shows the FDIs can expose themselves to differing risk structure although risk management activities simply represent the level of empowerment given to local management by headquarter due to limit of sample size despite diversity of risk and risk management tools. To sum, market seekers are found to have more strategic risk (revenue related risk) than efficiency seekers with financial risk (cost related risk). The market seekers can manage their risk by empowering their local organisation while the efficiency does the opposite ways. The risk management appears to be successful in general. Originality/value - Previous studies on small and medium enterprises' FDIs to China have concentrated on the analysis of entry determinants, withdrawal factors and individual risk management. Meanwhile, this research establishes enterprise-wide risk factors faced by the companies that advance into China, according to the method of the classification by ERM and verifies if they could synthetically improve performance through risk corresponding measures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.207-216
• /
• 2000

This paper introduces an effective system design method to develop a customer oriented product using a design optimization process and to select a set of critical design paramenters,. The process results in the development of a successful product satisfying customer needs and reducing development risk. The proposed scheme adopted a five step QFD(Quality Function Deployment) in order to extract design parameters from customer needs and evaluated their priority using risk factors for extracted design parameters. In this process we determine critical design parameters and allocate them to subsystem designers. Subsequently design engineers develop and test the product based on these parameters. These design parameters capture the characteristics of customer needs in terms of performance cost and schedule in the process of QFD, The subsequent risk management task ensures the minimum risk approach in the presence of design parameter uncertainty. An application of this approach was demonstrated in the development of weld quality monitoring system. Dominant design parameters affect linearity characteristics of weld defect feature vectors. Therefore it simplifies the algorithm for adopting pattern classification of feature vectors and improves the accuracy of recognition rate of weld defect and the real time response of the defect detection in the performance. Additionally the development cost decreases by using DSP board for low speed because of reducing CPU's load adopting algorithm in classifying weld defects. It also reduces the cost by using the single sensor to measure weld defects. Furthermore the synergy effect derived from the critical design parameters improves the detection rate of weld defects by 15% when compared with the implementation using the non-critical design parameters. It also result in 30% saving in development cost./ The overall results are close to 95% customer level showing the effectiveness of the proposed development approach.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.1
• /
• pp.23-30
• /
• 2021

This paper analyzed a survey of 388 general target samples to analyze the correlation between disaster safety costs and human risk factor analysis and evacuation behavior due to tunnel accidents. Considering the impact of the tunnel accident on disaster safety costs and the correlation between human evacuation and risk factors in the tunnel environment, the system should be reorganized to reflect the tunnel's basic plan, tunnel cross-section, tunnel installation.