• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.15-21
• /
• 2009

A 10-wk layer feeding trial was conducted to investigate the effects of high quality corn distiller's dried grains with solubles (DDGS) on performance, egg qualities, and yolk fatty acid composition. The economics of using DDGS in the Korean situation was also analyzed. A total of 216 Hy-line Brown layers, 23-wk of age, were employed in this trial consisting of three dietary treatments (0%, 10%, and 20% DDGS), and six replicates per treatment. All experimental diets were prepared as iso-protein (17%) and iso-calorie (2,780 kcal/kg). The use of DDGS up to 20% in layer diets did not affect the feed intake, laying rate, egg weight, and feed conversion ratio (P>0.05). At 5th and 10th wk of the trial, the eggshell color, albumen height, and Haugh unit were not influenced by the DDGS supplementation. At 5th wk of the trial, the eggshell qualities, like eggshell weight, eggshell thickness, and eggshell strength, were not affected by the DDGS feeding; however, these eggshell qualities were decreased at 10th wk due to the 20% DDGS feeding (P<0.05). Yolk color of DDGS 20% increased compared to DDGS 0% at 5th and 10th wk of the trial (P<0.05). At 10th wk, yolk/egg ratio of DDGS 20% decreased compared to DDGS 0% (P<0.05). The yolk fat content was not changed due to DDGS feeding. The monounsaturated fatty acid content of yolk decreased linearly by feeding DDGS (P<0.05). The yolk polyunsaturated fatty acid content of DDGS 20% increased significantly compared to DDGS 0%. The DDGS feeding was not found to affect the degree of yolk fat unsaturation. The cost of feed (￦/kg feed) decreased as the level of DDGS increased. The production costs of egg (￦/kg egg) were cheap in the order of DDGS 10%, DDGS 20%, and DDGS 0%, indicating that DDGS is a viable alternative feed ingredient to corn and soybean meal. In conclusion, high quality DDGS ($L^*$ 61.72) could be used economically up to 20% level without any harmful effect on laying performance: however, the use of DDGS up to 10% is more economical than DDGS 20%.

• Korean Journal of Poultry Science
• /
• v.15 no.3
• /
• pp.211-218
• /
• 1988

Data on egg number from time of first lay to 71 week of age were obtained from samples of single comb white leghorn breeder and brown layer breeder populations which were raised at manny breeding Co. These data were used to estimate the heritabilities of age at sexual maturity, early egg number, residual egg number and annual egg number. Also, the genetic correlation coefficients between these traits were estimated and selection efficiencies of each segment in early part record were estimated by use of the heritabilities and generic correlations. The estimated heritabilities and standard errors in two lines(W and B) were $0.30\pm0.07$ and $0.33\pm0.08$ at early records, $0.19\pm0.06$ and $0.18\pm$0.05 at residual records and $0.37\pm0.09$ and $0.49\pm0.10$ at time of first lay. Those at annual records were $0.24\pm0.06$ equally. The estimated correlation coefficients and standard errors between early record and annual record were $0.76\pm0.08$ and $0.77\pm0.07$. Those between early record and residual record were $0.46\pm0.15$ and $0.39\pm0.16$ respectively. At improving annual egg production per year, selection based on early part record(SM to 40 week of age) would be 69% more efficient than on annual record in line W and 80% more efficient than on annual record in line B. But, if it were considered that egg weight decreased due to sexual maturity and cost for data collection, use of selected segment from 35~40week of age in line W and from 31~40 week of age in line B would be desired in spite of a. small loss in relative selection efficiency. The generation interval would not be shortened.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.304-312
• /
• 2023

Plant breeding is a time-consuming process, mainly due to the limited annual generational advancement. A speed breeding system, using LED light sources, has been applied to accelerate generational progression in various crops. However, detailed protocols applicable to soybeans are still insufficient. In this study, we report the optimized protocols for a speed breeding system comprising 12 soybean varieties with various maturity ecotypes. We investigated the effects of two light qualities (RGB ratio), three levels of light intensity (PPFD), and two soil conditions on the flowering time and development of soybeans. Our results showed that an increase in the red wavelength of the light spectrum led to a delay in flowering time. Furthermore, as light intensity increased, flowering time, average internode length, and plant height decreased, while the number of nodes, branches, and pods increased. When compared to agronomic soil, horticultural soil resulted in an increase of more than 50% in the number of nodes, branches, and pods. Consequently, the optimal conditions were determined as follows: a 10-hour short-day photoperiod, an equal RGB ratio (1:1:1), light intensity exceeding 1,300 PPFD, and the use of horticultural soil. Under these conditions, the average flowering time was found to be 27.3±2.48 days, with an average seed yield of 7.9±2.67. Thus, the speed breeding systems reduced the flowering time by more than 40 days, compared to the average flowering time of Korean soybean resources (approximately 70 days). By using a controlled growth chamber that is unaffected by external environmental conditions, up to 6 generations can be achieved per year. The use of LED illumination and streamlined facilities further contributes to cost savings. This study highlights the substantial potential of integrating modern crop breeding techniques, such as digital breeding and genetic editing, with generational shortening systems to accelerate crop improvement.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.149-158
• /
• 2002

For the purpose of preciously describing real time traffic pattern in urban road network, dynamic network loading(DNL) models able to simulate traffic behavior are required. A number of different methods are available, including macroscopic, microscopic dynamic network models, as well as analytical model. Equivalency minimization problem and Variation inequality problem are the analytical models, which include explicit mathematical travel cost function for describing traffic behaviors on the network. While microscopic simulation models move vehicles according to behavioral car-following and cell-transmission. However, DNL models embedding such travel time function have some limitations ; analytical model has lacking of describing traffic characteristics such as relations between flow and speed, between speed and density Microscopic simulation models are the most detailed and realistic, but they are difficult to calibrate and may not be the most practical tools for large-scale networks. To cope with such problems, this paper develops a new DNL model appropriate for dynamic traffic assignment(DTA), The model is combined with vertical queue model representing vehicles as vertical queues at the end of links. In order to compare and to assess the model, we use a contrived example network. From the numerical results, we found that the DNL model presented in the paper were able to describe traffic characteristics with reasonable amount of computing time. The model also showed good relationship between travel time and traffic flow and expressed the feature of backward turn at near capacity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• The Korean Society of Law and Medicine
• /
• v.18 no.2
• /
• pp.163-194
• /
• 2017

Coronary artery disease has increased in Korea as the country enters the aged society. It is well known that the incidence of coronary artery disease is related to aging, hypertension, diabetes, hyperlipidemia, and dietary habit. For effective treatment of significant coronary stenosis, close coordination between cardiac surgery and cardiology team is essential. Especially cardiologists' decision whether to do the stent placement or CABG is very important because the cardiologists usually start to consult the patients for their treatment. Recently, non-surgical interventions(that is stent placement) in cardiology field have dramatically increased as the national insurance system removed the limitation of the number of stents deployed. However, accidents are often caused by inappropriate use of stents, especially in patients with triple coronary disease or left main disease with heavy coronary calcifications. Another aspect of stent placement is to cope with an emergency case in the event of coronary rupture or pericardial tamponade during coronary interventions without cardiac surgeons. In the past two years, the Korea Consumer Agency (Consumer Dispute Coordination Committee) analyzed eight cases of medical dispute settlement. Only two hospitals were manned with both cardiologists and cardiac surgeons. Seven patients died of procedures of stenting and five patients died on the day of the procedure. Among the 8 cases, 5 cases showed 3 vessel disease and the rest of the cases had either severe calcification, complete occlusion or poor coronary antomies for stenting According to a 2017 national data registry of coronary stenting, less than 3 drug-eluting stents were implanted in 98% of all patients. In 2015, the number of stent procedures was 38,922, and approximately in 800 (2%) cases, more than four stents were used per patient. We emphasize that it is necessary to seriously consider the cost-benefit analysis between stent and CABG. The patient has the right to choose the right procedure by asking the liability of 'instruction explanation obligation'. He should be well informed of the pros and cons of both procedures to avoid overuse of stent. It can be solved by intimate discussion of individual cases with the cardiac surgeon and the patient. Unilateral dialogue with the patient, forceful restriction on the number of stenting, lack of surgeon's backup in difficult cases should all be avoided. It is also necessary to solve the problem not only at the hospital level, such as multidisciplinary integrated medical care, but also a nationwide solution such as expanding cardiac surgeons as essential personnel to public officials.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.10
• /
• pp.1443-1451
• /
• 2014

Increasing cost and scarcity of maize has stimulated the use of alternative feed sources (AFS) in the diets of cattle. In this study, we investigated the effects of partial or total replacement of maize on nutrient digestibility, growth performance, blood metabolites, and economics in Limousin crossbred feedlot cattle. Forty-five $Limousin{\times}Luxi$ crossbred bulls were randomly assigned to the three treatment groups, orthodox diet (OD; 45.0% maize), partial replacement diet (PRD; 15% maize, 67% AFS), total replacement diet (TRD; 0% maize, 100% AFS). The growth feeding trial lasted for 98 days. Dry matter intake (DMI) and average daily gain (ADG) were recorded. The digestion trial was carried out after the end of the growth trial. Total faeces and feed samples were measured daily. Digestibilities of dry matter (DM) and organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF) were calculated. After the feeding trial, blood metabolites were measured in 12 animals from each group. Initial and final body weights did not differ significantly among treatment groups (p>0.05). The ADG and DMI were 1.72 and 8.66, 1.60 and 9.10, and 1.40 and 9.11 kg/d for OD, PRD, and TRD, respectively. The PRD and TRD exhibited lower ADG (p<0.01) and higher DMI (p<0.01) than OD. The DMI (%body weight) was comparable between groups (p>0.5). Feed efficiency of PRD and TRD were lower than OD (p<0.01). The DM digestibility decreased with reduced level of maize (p = 0.10), OM digestibility was higher in OD (p<0.05), and CP, NDF and ADF digestibilities were similar for all groups (p>0.05). Blood urea nitrogen (mg/dL) in PRD and TRD was higher than OD (p<0.01), while other blood parameters did not differ significantly. Feed costs ($/head/d) were 1.49, 0.98, and 0.72 for OD, PRD, and TRD, respectively (p<0.01). Feed costs per kg gain ($) were significantly lower for PRD (0.63) and TRD (0.54) than OD (0.89; p<0.01). Overall profit ($/head) and daily profit ($/head/d) did not differ significantly between treatments (p>0.05), although TRD showed the highest economic benefits overall (p<0.01). While a traditional diet maximized the growth rate, partial or total replacement of dietary maize with AFS proved economically feasible due to their lower costs and comparable nutrient digestibilities of DM, CP, NDF, and ADF. Partial replacement may prove economically competitive in the current situation of China.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.157-175
• /
• 2012

It is difficult to evaluate the performance of process innovation of e-procurement which has large scale and complex processes. The existing evaluation methods for measuring the effects of process innovation have been mainly done with statistically quantitative methods by analyzing operational data or with qualitative methods by conducting surveys and interviews. However, these methods have some limitations to evaluate the effects because the performance evaluation of e-procurement process innovation should consider the interactions among participants who are active either directly or indirectly through the processes. This study considers the e-procurement process as a complex system and develops a simulation model based on MAS(Multi-Agent System) to evaluate the effects of e-procurement process innovation. Multi-agent based simulation allows observing interaction patterns of objects in virtual world through relationship among objects and their behavioral mechanism. Agent-based simulation is suitable especially for complex business problems. In this study, we used Netlogo Version 4.1.3 as a MAS simulation tool which was developed in Northwestern University. To do this, we developed a interaction model of agents in MAS environment. We defined process agents and task agents, and assigned their behavioral characteristics. The developed simulation model was applied to G2B system (KONEPS: Korea ON-line E-Procurement System) of Public Procurement Service (PPS) in Korea and used to evaluate the innovation effects of the G2B system. KONEPS is a successfully established e-procurement system started in the year 2002. KONEPS is a representative e-Procurement system which integrates characteristics of e-commerce into government for business procurement activities. KONEPS deserves the international recognition considering the annual transaction volume of 56 billion dollars, daily exchanges of electronic documents, users consisted of 121,000 suppliers and 37,000 public organizations, and the 4.5 billion dollars of cost saving. For the simulation, we analyzed the e-procurement of process of KONEPS into eight sub processes such as 'process 1: search products and acquisition of proposal', 'process 2 : review the methods of contracts and item features', 'process 3 : a notice of bid', 'process 4 : registration and confirmation of qualification', 'process 5 : bidding', 'process 6 : a screening test', 'process 7 : contracts', and 'process 8 : invoice and payment'. For the parameter settings of the agents behavior, we collected some data from the transactional database of PPS and some information by conducting a survey. The used data for the simulation are 'participants (government organizations, local government organizations and public institutions)', 'the number of bidding per year', 'the number of total contracts', 'the number of shopping mall transactions', 'the rate of contracts between bidding and shopping mall', 'the successful bidding ratio', and the estimated time for each process. The comparison was done for the difference of time consumption between 'before the innovation (As-was)' and 'after the innovation (As-is).' The results showed that there were productivity improvements in every eight sub processes. The decrease ratio of 'average number of task processing' was 92.7% and the decrease ratio of 'average time of task processing' was 95.4% in entire processes when we use G2B system comparing to the conventional method. Also, this study found that the process innovation effect will be enhanced if the task process related to the 'contract' can be improved. This study shows the usability and possibility of using MAS in process innovation evaluation and its modeling.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.453-461
• /
• 2011

This study is to derive a project model based on potential demand for Korean-style houses, focusing on new town detached housing sites that LH supplies and to test validity of the derived model and to present the direction and supply methods of the projects. The existing high-class new town Korean-style housing developments that have been considered were found to have little business value due to problems in choice of location and discordance of demand, so 6 types of projects were established through the methods of changes in planned scale, combined use, and subdivision of plot of land based on the results of survey. The type that has the highest business value among the project models was block-type multifamily houses, and this can be interpreted as the increase in total construction area leading to increase inrevenues of allotment sales due to economies of scale. The feasibility of mass housing model in which small-scale Korean-style houses are combined with amenities was found to be high, and if the same project conditions as those of the block-type multifamily houses are applied, the business value of the Korean-style tenement houses was found to be high. Besides, the high-class housing models within block-type detached housing areas are typical projects that the private sector generally promotes, and the construction cost was found to be most expensive with 910 million won per house. In order to enhance the business value of the Korean-style housing development, collectivization such as choice of location, diversification of demand classes, optimization of house sizes, and combination of uses is needed. And in order to adopt Korean-style houses in the detached housing sites, the adjustments and division of the existing planned plots are needed, and the strategies to cope with new demand through supplying Korean-style housing types of sites can be suggested. Also breaking away from the existing uniform residential development methods, the development method through supplying original land that is natural land not yet developed besides basic infrastructures (main roads and water and sewage) can be considered, and as the construction of more than 1~2 stories building is impossible due to the structure of Korean-style house roof and furniture. So it can be suggested that original land in the form of hilly land is considered to be most suitable to large-scale development projects.

• Journal of Animal Environmental Science
• /
• v.12 no.3
• /
• pp.141-150
• /
• 2006

To optimise the efficient use of nutrients in pig slurry is to cultivate friendly environmental crops. This field survey is to investigate the actual conditions of pig slurry utilization for cultivation of crops in the agricultural farm, based on the survey for 407 selected farms in 9 provinces included 78 counties in Korea. The results obtained in this survey were summarized as follow ; The motive which came to use pig slurry in the agricultural farm were production of friendly environmental crops (29.7%), economy of chemical fertilizer (25.1%), spontaneously (19.2%), inducement of neighboring farmhouse (16.0%), increase of soil fertility (9.3%), and the others (0.7%), respectively. The proportions of pig slurry application land were 56.5% for.ice paddy, 22.6% for dry field, 13.3% for orchard, 4.4% for controlled agriculture and 3.2% for other, respectively. The number of times of pig slurry utilization per year were once (48.9%), twice (31.9%), thrice (14.0%), and the others (5.2%), respectively. The controversial points of pig slurry utilization were malodor (54.1%), insufficiency of spread equipment (22.1%), inconvenience (14.5%), over application (3.4%), over cost (2.9%), heavy metal (1.7%), sanitation (1.0%) and the other (0.2%), respectively. The results indicated that pig slurry could be used as fertilizer source of friendly environmental crops, but further studies are needed to determine the application method and value of the pig slurry for crop cultivation.