• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.1042-1052
• /
• 2010

The Degradation of amur cork tree extract is investigated by GC-MS after treating the dye with three thermal degradation systems of, room temperature (RT), $4^{\circ}C$ refrigeration (LT), $100^{\circ}C$ oven (OV), and $H_2O_2$/UV/$O_2$ (PER) degradation system for 0-24 days. It was found that PER degradation system represented the highest intensity of degradation treatment followed by OV treatment among the four degradation parameters. The possible fingerprint products of amur cork tree dye, that yielded 68% (or higher) reliability in the NIST spectral match, were isobenzofuran-1,3-dione,4,5-dimethoxy- (8.37 min, PER only), 1,3-dioxolo[4,5-g]isoquinolin-5(6H)-one,7,8-dihydro (9.41 min, PER only), canthine-6-one (10.24 min, RT, LT, OV only), and dihydroberberine (15.05 min, RT, LT, OV, PER) in the order of higher to lower possibility of detection. Unknown products 7 (13.43 min) and 8 (16.35 min) are two other possible fingerprint products of amur cork tree dye that require future identification.

• Corrosion Science and Technology
• /
• v.21 no.2
• /
• pp.100-110
• /
• 2022

Corrosion of steel reinforcement is the most important mode of concrete structures damages. It strongly depends on the composition and physicochemical properties of the cementitious medium. The use of waste materials as lightweight aggregates in concrete is environmentally recommended in polluted environments such as marine and/or industrial atmospheres in order to reduce its porosity and ensure the requested protection of reinforcing steel. The present study investigated the effect of waste cork addition on corrosion resistance of steel rebar in mortar specimen prepared in the laboratory. The main objective of this study was to improve the corrosion resistance of reinforcing steel. Another objective of this study was to valorize this ecological product and preserve the environment. Results obtained from various electrochemical tests indicated that the presence of a fine cork powder substantially improved the corrosion resistance of steel in the mortar contaminated by chloride ions. This improvement was reflected by a notable decrease in corrosion current density and a shift of corrosion potential of the steel towards more noble values. Moreover, the presence of a fine cork powder in the mortar had no adverse effect on its mechanical properties.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.10a
• /
• pp.297-301
• /
• 2005

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.868-876
• /
• 2005

Silk fabrics were dyed with yellow natural materials. Gardenia, turmeric, amur cork tree, safflower, Japanese pagoda tree, and onion were used as natural materials. Color image of natural dyed silk fabrics was classified by 4 factors(Cheerfulness, Comfortness, Pastrol, Revealation). Cheerfulness factor affected significantly with color image. Amur cork tree or turmeric dyed fabrics were shown as light and cute, safflower or gardenia dyed fabric shown as comfort, and onion dyed fabrics shown as mature and simple. Color image with specialty was significant difference in Preference and Revelation factor. Preference was appeared as amur cork tree>turmeric>gardenia>safflower>Japanese pagoda tree>onion.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.1-7
• /
• 2014

Dissolving part of xylan and lignin in lignocellulosic biomass by base can be used as pretreatment technique. Cork oak was pretreated with sodium hydroxide solution and the pretreatment effects were evaluated with two critical factors - NaOH concentration and pretreatment temperature. Some of xylan and lignin were removed by base pretreatment. At $90^{\circ}C$ and 13% NaOH pretreatment, 22.0% of lignin and 78.8% of xylan removed by base treatment. Enzymatic hydrolysis of cork oak which was pretreated at higher temperature or concentration was further improved. After pretreatment of cork oak with 13% NaOH at $90^{\circ}C$, the conversion rate of cellulose to fermentable sugars were reached up to 91.3%. At ethanol fermentation with enzymatic hydrolysate from different pretreatment conditions, all enzymatic saccharification liquids were well fermented by Saccharomyces cerevisiae.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.933-935
• /
• 2017

This paper deals with the influence of fungi for the thermal protective cork-based exterior insulator which protect a missile system from aerodynamic loads and heating during flight of missile. We consider the adhesion of cork-based composite on the composite motor case which fabricated by filament winding process. We also consider the importance of the requirement analysis for effective, successful system development under given system conditions. In order to develop the basic requirement analysis for the thermal protective cork-based exterior insulator, an experimental requirement analysis was accomplished, and some experimental comparing results, the study for preventing fungi are presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.148-149
• /
• 2020

Currently, the most commonly used EPS insulation material has been mainly used because its ease of adhesion with concrete. However, due to poor adhesion with wallpaper, separate adhesion needs to be strengthened and there are cases of breakage or grooves in the process of dismantling the mold. The biggest problem is that when a fire breaks out, various harmful substances are present and highly flammable. Cork used in this study is a truly eco-friendly building material that is taken from between the outer and inner bark of cork trees and does not damage the wood. Also, it is a porous material that is made up of countless cells and contains an air gap between the cells. It is very light in weight between 0.06 and 0.07 and has excellent insulation with a heat conductivity of 0.04W/mK. In addition, it has high stability in the topic of conversation because it does not produce harmful gas when burned and has self-sustaining properties. However, research on cork, an eco-friendly building material with excellent performance to date, is scarce Therefore, we encourage existing scholars to raise interest in new eco-friendly building materials through this study. It also aims to manufacture insulation boards with new inorganic properties using the low weight and heat conductivity held by the cork.

• Journal of the Korean Home Economics Association
• /
• v.31 no.1
• /
• pp.211-223
• /
• 1993

바닥마감재료가 다른 여름철의 찬바닥이 인체피부온도 및 온열적 쾌적감에 미치는 영향을 검토하기 위하여, 주위벽 및 천장의 온도를 기온과 거의 같게 한 항온실을 이용해서 바닥에 앉은 자세, 의자에 앉은 자세, 서 있는 자세별로 검토했다. 그 결과를 요약하면 다음과 같다. (1) 평균피부온도는 기온이 낮고 수온이 낮을수록 낮았다. Carpet 마감재료는 서 있는 자세, 바닥에 앉은 자세의 평균피부온도가 낮고 의자에 앉은 자세가 높았다. Cork 마감재료가 Carpet, Flooring 마감재료에 비해 평균피부온도가 낮았다. (2) 온냉감평가는 흑구온도가 낮게 되면$\ulcorner$중성이다$\lrcorner$혹은$\ulcorner$서늘하다$\lrcorner$쪽으로 평가하고, Cork, Carpet, Flooring 마감재료의 순으로 $\ulcorner$서늘하다$\lrcorner$쪽으로 평가 하였다. (3) 쾌적감평가는 바닥에 앉은 자세와 서 있는 자세가 의자에 앉은 자세보다 쾌적한 것으로 평가하였다. 마감재료는 Cork, Flooring, Carpet 순으로 쾌적하다고 평가 하였다. (4) 바닥마감재료에 대한 평가는 바닥에 앉은 자세의 경우, Carpet 마감재료는$\ulcorner$차가운$\lrcorner$$\ulcorner$습기찬$\lrcorner$의 평가점수가 높고, Cork 마감재료는$\ulcorner$평활한$\lrcorner$$\ulcorner$차가운$\lrcorner$$\ulcorner$감촉이 좋은$\lrcorner$$\ulcorner$딱딱한$\lrcorner$의 평가점수가 높고, Flooring 마감재료는$\ulcorner$평활한$\lrcorner$$\ulcorner$탄력성이 없는$\lrcorner$$\ulcorner$딱딱한$\lrcorner$의 평가점수가 높았다.$\ulcorner$따듯한$\lrcorner$-$\ulcorner$차가운$\lrcorner$의 평가는 바닥온도의 영향을 받아서, Cork, Flooring 마감재료가 Carpet 마감재료보다$\ulcorner$차가운$\lrcorner$의 높은 점수평가를 하였다. (5) Carpet 마감재료는 평균피부온도가 34$^{\circ}C$를 넘어도$\ulcorner$약간 시원하다$\lrcorner$는 평가이고, 서 있는 자세와 의자에 앉은 자세가 바닥에 앉는 자세보다 쾌적하다고 평가한다. Cork 마감재료는 3자세 모두 평균피부온도 33~34$^{\circ}C$의 사이에서 가장 쾌적하다. Flooring 마감재료는 온열적중성, 쾌적감의 중성의 평가가 많다. 이상의결과를 종합하면, 찬바닥이 인체에 미치는 영향은 바닥마감재료로는 Cork, Flooring이 보다 좋은 평가를 하였음으로, 여름철 바닥마감재료로서는 Cork, Flooring 마감재료가 바람직하다고 생각된다. 자세별로는 서 있는 자세는 바닥에 앉은 자세와 거의 같은 경향을 보이고, 의자에 앉은 자세는 바닥에 앉은 자세와 서 있는 자세 만큼 영향을 받지 않았다. 이후 실험결과를 중심으로 찬바닥의 경우, 보다 쾌적한 온열환경범위를 제안하려고 한다.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.276-283
• /
• 2017

The aim of this study is to develop an effective dyeing process for black color on the silk fabrics, using natural Indigo, Madder, Amur cork tree, Alder, Logwood, and Gallnut. All natural dye materials were water-extracted, concentrated, and freeze-dried. Seven different processes were carried out and the color differences(${\Delta}E$) of black color with each process from the chemical black dyed fabric were compared. The light, washing, and rubbing fastness were evaluated. The black dyeing of the silk fabrics was well carried and excellent black color was obtained in every methods. The profound black color could be obtained by the subtractive mixture of the three primary colors of red, yellow, and blue in the order of indigo(blue) - amur cork tree(yellow) - madder or lac(red). Black color was efficiently obtained by iron mordant when logwood or alder fruit was used. The color difference(${\Delta}E$) from the black color with chemical dyestuff was the lowest in the indigo - amur cork tree - lac - iron method. Light fastness and washing fastness were excellent in all dyeing processes, showing grade 5. The fastness to rubbing was excellent as shown grade 5 in the dry samples of logwood - iron process and alder fruit - iron process.