• 한국산림과학회지
• /
• 제64권1호
• /
• pp.26-32
• /
• 1984

본(本) 연구(硏究)는 COMPLY의 core에 사용(使用)되는 파티클보오드를 내수처리(耐火處理)파티클보오드로 사용(使用)하였을 때 COMPLY의 강도적(強度的) 성질(性質)에 미치는 영향(影響)을 규명하고져 실시(實施)하였다. Ammonium sulfate의 경우 COMPLY의 MOR은 약액농도(藥液濃度)가 증가(增加)함에 따라 약액농도(藥液濃度)가 10%까지는 증가(增加)하나 그 이후(以後)는 감소(減少)하는 경향(傾向)을 나타내고 있으며 Minalith의 경우는 ammonium sulfate의 경우와는 반대경향(反對傾向)을 나타내고 있다. COMPLY의 MOE는 약액농도(藥液濃度)가 증가(增加)함에 따라 감소(減少)하는 경향(傾向)을 나타내고 있지만 약액농도간(藥液濃度間)에 유의적(有意的)인 차이(差異)는 나타내고 있지 않다. COMPLY의 전단강도(剪斷強度)는 약제(藥劑)의 처리농도증가(處理濃度增加)에 따라 증가(增加)하는 경향(傾向)을 나타내고 있으나 유의적(有意的)인 차이(差異)는 없으며 ammonium sulfate보다는 Minalith가 더 양호(良好)한 결과(結果)를 나타내고 있다. COMPLY의 목피율(木破率)은 15%농도(濃度)까지는 증가(增加)하는 경향(傾向)을 보이고 있으나 그 이후(以後)는 감소현상(減少現象)을 나타내고 있다. 평행(平行) 및 교호적층재(交互的層材)의 결과(結果)는 COMPLY 결과(結果)보다 대체로 좋은 결과(結果)를 나타내고 있으나 무처리(無處理)파티클보오드의 결과(結果)는 저조(低調)한 결과(結果)를 나타내고 있다. 약제처리(藥劑處理) COMPLY의 MOR, MOE는 무처리(無處理) 파티클보오드의 결과(結果)보다 136%, 170%로 각각(各各) 증가(增加)하였다. 따라서 내수처리(耐火處理)로 인(因)한 파티클보오드의 강도감소현상(強度減少現像)은 COMPLY를 제조(製造)함으로서 강도적(強度的) 특성(性質)을 개선(改善)시킬 수 있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.1-4
• /
• 2014

The present work focuses on the analysis of the pulverized coal combustion aerodynamics of the dual swirl burner by the control of the swirl-modes such as the outer swirl intensity (OSI). The detailed structure of pulverized coal swirling flames with swirl-mode was studied experimentally by particle image velocimetry and local flame colors based on $OH^*$, $CH^*$, and ${C_2}^*$ radicals. For all co-swirling conditions, the internal recirculation zone (IRZ) was observed near the inner shear layer with respect to the processing vortex core structure. Furthermore, a co-rotating vortex in the outer shear layer and the exhaust tube vortex (ETV) along the central axis were observed. The intensity of $CH^*$ signal was higher with small coal particle size, conversely, the size of the distribution of the $CH^*$ signal becomes larger. Therefore, the control of the aerodynamics with changing swirl intensities may play an important role in improving both environmental and combustion performances.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.544-551
• /
• 2013

Recently high speed mixer, which is mixing, grinding, dispersion for liquid-liquid material, has been widely used several industries such as food, cosmetics, pharmaceuticals, fine chemicals, electronic material. This high speed mixer has a core element part called particle separation device. Particle separation device, which makes mixed liquid and liquid material using shear forces from a rotor and a stator, is a decisive factor in the distributed parts. In this study, we examined the velocity distribution of the two models of particle separation device using computation fluid dynamics, so that we were able to see the difference of the velocity distribution according to the shape. Also, by experiment, we observed that the use of rotor-screen type is deemed more suitable in case of accurately considering the effect of improving of the dispersibility through the circulation of the future.

• Journal of Forest and Environmental Science
• /
• 제31권2호
• /
• pp.119-125
• /
• 2015

This study examined the effects of rice straw steaming time and mixing ratio between rice straw and wood particle on the properties of mixed particle board from Acacia mangium Willd wood and rice straw. Rice straw and Acacia mangium Willd wood were collected in Hanoi, Vietnam. The particle board was three-layer particle board with the structural ratio of 1:3:1. The thickness, density and board size of the particle board were 18 mm, $0.7g/cm^3$, and $800{\times}800{\times}18$ (mm, including trimming), respectively. A resin mixture between commercial Urea-formaldehyde (U-F) adhesive and methylene diphenyl isocyanate (MDI) adhesive was used with a dosage of 12% for the core layer and 14% for the surface layer. In this experimental design, the steaming time for rice straw was 15, 30, 45, 60, and 75 minutes at $100^{\circ}C$. The rice straw-wood mixing ratio was 10, 20, 30, 40, and 50%. The results showed that both mixing ratio and steaming time affect the properties of the particleboard, but the mixing ratio has a stronger impact. A higher mixing ratio and a longer steaming time resulted in a better quality of particleboard. The optimal steaming time for rice straw was 46.12 minutes with the straw-wood mixing ratio of 29.85% with the following characteristics of the particle board: the modulus of rupture (MOR) of 14.64 MPa, internal bond strength (IB) of 0.382 MPa, thickness swelling (TS) of 8.83%, and board density of $0.7-0.7g/cm^3$.

• 폴리머
• /
• 제30권5호
• /
• pp.437-444
• /
• 2006

Hydroxypropyl methylcellulose phthalate (HPMCP)에 isophorone diisocyanate (IPDI)와 2-hydroxyethyl methacrylate (HEMA)를 순차적으로 반응하여 우레탄 그룹을 형성하고 HPMCP에 비닐 그룹을 도입하여 반응형(reactive) HPMCP를 합성하였다. 제조된 반응형의 HPMCP와 반응전의 순수한 HPMCP의 분자량, 산가, 임계 미셀 농도(CMC) 등을 측정하였으며, 스티렌의 유화 중합에 고분자 유화제로서 도입하였다. HPMCP의 함량을 단량체인 스티렌 대비로 6, 9, 12, 18, 24 wt%로 도입하여 HPMCP 혼성 폴리스티렌 나노입자를 제조하고, 최대 중합 속도($R_{p,max}$), 입자당 평균라디칼 개수(n), 입자 크기 분포 등을 분석하였다. 또한 제조된 HPMCP 혼성 폴리스티렌 나노입자의 모폴로지를 TEM으로 분석하여 core-shell 구조임을 확인하였으며, TGA를 이용하여 열적안정성의 변화를 분석하였다. 반응형 HPMCP는 순수 HPMCP와는 달리 HEMA의 비닐 그룹으로 인해 높은 중합속도와 작은 입자 크기, 높은 표 값을 나타내었으며, 높은 젤 함량을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.589-600
• /
• 2022

Investigations on the molten-pool sloshing behavior are of essential value for improving nuclear safety evaluation of Core Disruptive Accidents (CDA) that would be possibly encountered for Sodium-cooled Fast Reactors (SFR). This paper is aimed at synthesizing the knowledge from our recent studies on molten-pool sloshing behavior with solid particles conducted at the Sun Yat-sen University. To better visualize and clarify the mechanism and characteristics of sloshing induced by local Fuel-Coolant Interaction (FCI), experiments were performed with various parameters by injecting nitrogen gas into a 2-dimensional liquid pool with accumulated solid particles. It was confirmed that under different particle-bed conditions, three representative flow regimes (i.e. the bubble-impulsion dominant, transitional and bed-inertia dominant regimes) are identifiable. Aimed at predicting the regime transitions during sloshing process, a predictive empirical model along with a regime map was proposed on the basis of experiments using single-sized spherical solid particles, and then was extended for covering more complex particle conditions (e.g. non-spherical, mixed-sized and mixed-density spherical particle conditions). To obtain more comprehensive understandings and verify the applicability and reliability of the predictive model under more realistic conditions (e.g. large-scale 3-dimensional condition), further experimental and modeling studies are also being prepared under other more complicated actual conditions.

• 폴리머
• /
• 제39권1호
• /
• pp.78-87
• /
• 2015

$30-50{\mu}m$의 입도를 갖는 마이크로캡슐을 목표로 poly(acrylonitrile-co-methyl methacrylate)를 쉘로, n-octane을 코어로 하는 코어-쉘 구조의 열팽창 마이크로캡슐을 합성하였다. SPG 멤브레인 유화 후 현탁 중합하여 기존의 현탁 중합대비 균일한 입자를 합성하였다. 또한 네 가지 안정제 및 다섯 가지 가교제의 종류와 함량에 따른 캡슐의 합성을 진행하였다. Poly(vinyl alcohol)을 안정제로 하여 합성한 캡슐의 표면이 매끈하면서도 균일한 형태를 보였으며, 액체 탄화수소가 코어에 캡슐화된 양 또한 우수하였다. 또한 가교제로 1,4-butnaediol methacrylate (BDDMA)를 첨가했을 때 평균입경 $36.8{\mu}m$의 입자가 균일하게 합성되었다. 또한 BDDMA를 0.05 mol% 함량으로 합성한 입자의 캡슐화 정도가 가장 우수하였다.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.119-125
• /
• 1999

본 연구는 싸이클론 반응로에서 $FeS_{2}$의 반응 특성에 관한 조사를 연구하였다. 수학적인 모형도로 이 반응로에서 $FeS_{2}$의 oxidation과 suifation 등을 전개하엿다. 모형은 $FeS_{2}$에서 chemical control shrinking core로서 그리고 ${Ca(OH)}_{2}$에서 fluid film control shrinking core로서 가정하였으며 수식으로서 발전시켰다. 본 실험은 이 반응 파라메터들의 영향에 연구로서 진행하였으며 즉 반응로의 온도변화, $FeS_{2}$의 입자크기, 공기 주입비율, 시료 주입비율, 그리고 $FeS_{2}$와 ${Ca(OH)}_{2}$ 비율 등이다. Oxidation과 Sulfation에 의한 반응물들은 화학적 및 물리적으로 특성을 기술하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.922-930
• /
• 2004

An experimental investigation was performed to study on the generation of air bubble and air core with swirling flow in a horizontal cicular tube. To determine some characteristics of the flow, 2D PIV technique is employed for velocity measurement in water. The experimental rig is manufactured from an acryl tube. The test tube diameter of 80mm, and a length of 3000mm. The used algorithm is the gray leve cross-correlation method(Kimura et al. 1986). An Ar-ion laser is used and the light from the laser(500mW) passes through a probe to make two-dimensional light sheet. In order to make coded images of the tracer particles on one frame, an AOM(Acoustic-Optical Modulator) is used. The maximum axial velocities showed near the test tube wall at y/D =0.1 and y/D =0.9 along the test tube. The higher Reynolds number increase, the lower axial velocities are showed in the center of the test tube. The air bubbles are generated from Re =10,000 and developed into air core from the recirculating water pump rpm equal 30Hz. The pressure and temperature are measured across the test tube at X/D=3.33.

• Archives of Pharmacal Research
• /
• 제20권4호
• /
• pp.324-329
• /
• 1997

AB-type amphiphilic copolymers (abbreviated as LE) composed of poly (L-leucine) (PLL) as the A component and poly (ethylene oxide) (PEO) as the B component were synthesized by the ring-opening polymerization of L-leucine N-carboxy-anhydride initiated by methoxy polyoxyethylene amine $(Me-PEO-NH_2)$ and characterized. Core-shell type nanoparticles were prepared by the diafiltration method. Particle size distribution obtained by dynamic light scattering was dependent on PLL composition and the size for LE-1, LE-2 and LE-3 was $369.6{\pm}267$, $523.4{\pm}410$ and $561.2{\pm}364 nm$, respectively. Shapes of the nanoparticies observed by transmission electron microscope (TEM) were almostly spherical. The critical micelle concentration (CMC) of the nanoparticles determined by a fluorescence probe technique was dependent on the composition of hydrophobic PLL, and the CMC for LE-1, LE-2 and LE-3 was $2.0{\times}10^{-6},1.7{\times}10^{-6}$ and $1.5{\times}10^{-6}(mol/l) $, respectively. Clonazepam release from core-shell type nanoparticles in vitro was dependent on PLL composition and drug loading content.