• 한국간호교육학회지
• /
• 제26권1호
• /
• pp.16-24
• /
• 2020

Purpose: This study examined the effects of guided imagery on stress, state anxiety, test anxiety and core basic nursing skill performance score of undergraduate nursing student. Methods: An equivalent control group pretest-posttest design was utilized. A total of 45 senior nursing students were randomly assigned to either an intervention group to receive guided imagery, or a control group (experimental group=23 students, control group=22 students). The guided imagery was provided via audio files to the intervention group for eight minutes, once a day for five days. The pretest was given before the intervention to measure variables for both groups, and the posttest was performed immediately afterward and three days after the intervention. Results: Significant differences were found between the two groups in stress ((F=4.94, p=.012), state anxiety (F=5.99, p=.005), and basic core nursing skill performance scores (Z=-2.45, p=.015). Conclusion: Guided imagery for nursing students has been identified as effective for stress, state anxiety, and basic core nursing skill performance scores. Guided imagery can be used as an effective intervention before performance tests. These study results can provide useful data for nursing education.

• 시큐리티연구
• /
• 제21호
• /
• pp.1-18
• /
• 2009

인간의 요추는 똑바로 선 자세에서 골반 위에 있는 근육과 인대들에 의해 고정되어 있다. 인간이 움직일 때 마다 중심을 잡아주고, 근 골격계 구조를 적절히 유지시키는 요추부근육들을 효과적으로 스트레칭하고, 강화하여 노화로 인한 '건강의 약화'에서 벗어날 수 있다고 주장하였다. 이와 같은 요부안정화근육 강화는 요추부 재활과 운동 수행능력까지도 증가시킨다. 이 연구는 척추 강화 운동 요추 안정화 운동을 요추부의 근력, 유연성 및 균형, 요추 기능에 (코어프로그램)의 효과를 조사했다. 이 연구의 대상은 민간 경비 회사에 등록된 18명을 선정했다. 각 운동 그룹(n=9)은 무작위로 무선 표집하여 선정됐다. 이 연구의 방법으로 요추부 근력 측정 장비 BTE, 눈금자 줄자, 유연성, 균형과 요추 기능을 사용하였고 이에 따른 결과는 아래에 요약하였다. 굴곡근력 요추 안정화 운동 (핵심 운동) 단체(p<.05)을 개선했다. 신근 근육 강도가 요추 안정화 운동 (코어 프로그램) 그룹(p<.05)을 개선했다. 요추부 유연성 강화 운동 그룹과 요추 안정화 운동 그룹 (p<.05)을 개선했다. 척추의 균형 능력을 강화하는 그룹과 요추 안정화 운동 그룹 (코어 프로그램) 그룹에서 개선되었다(p<.05). 위의 결과에 따른 이 연구에서는 각 개인 경비 및 보안에 척추 강화 운동 요추 안정화 운동의 효과를 보여주어 지속적인 코어프로그램의 활성 방안을 고려해보아야 겠다.

• 디지털융복합연구
• /
• 제14권6호
• /
• pp.285-294
• /
• 2016

본 연구는 간호대학생을 대상으로 기관내 흡인실습교육을 중심으로 스마트폰 동영상과 형성적 피드백을 활용한 핵심기본간호술 교육이 대상자의 핵심기본간호술 지식, 핵심기본간호술 수행능력, 자기효능감, 학습동기에 미치는 효과를 파악하기 위해 시도되었다. 간호대학 2학년 학생 54명이 모집되었으며, 실험군과 대조군으로 각각 27명씩 구성되었다. 실험군에게는 핵심기본간호술 지도 시 개별적인 형성적 피드백을 제공하였고, 수행과정을 스마트폰 동영상으로 촬영한 교육을 실시하였다. 대조군에게는 일반적 실습교육인 4시간 자율실습을 실시하였다. 연구결과 실험군의 핵심기본간호술 지식, 핵심기본간호술 수행능력, 자기효능감, 학습동기가 대조군에 비해 유의하게 향상되었다. 본 연구결과를 바탕으로 향후 간호대학에서 핵심기본간호술 교육 시 스마트폰 동영상을 활용한 반복학습과 형성적 피드백을 통한 정교한 학습이 이뤄질 수 있도록 교육현장에서 활발하게 활용되기를 고대한다.

• 대한물리치료과학회지
• /
• 제24권1호
• /
• pp.1-13
• /
• 2017

Purpose: The objective of this study was compare the effect of core muscle strengthening between core exercise on stable surface and core exercise on unstable surface. Methods: Thirty-nine adults participated in this study and were randomly allocated to three groups. The stable surface exercise group and unstable surface exercise groups practiced core muscle training for $3{\times}30minute$ sessions over a 4-week period. The control group did not received therapeutic intervention except pre and post test. The following clinical tools were used to assess core muscle strength and balance: Side Plank Test, Trunk Flexion Test, Balance Error Scoring Test, Core Muscle Stength & Stability Test. Results: The stable surface exercise group showed significant improvement in trunk muscle strength of anterolateral part as revealed by the Side Plank Test and Trunk flexion Test(p<.05). The unstable surface exercise group showed significant improvement in trunk muscle strength of anterolateral part and balance ability as revealed by the Balance Error Scoring Test and Core Muscle Strength & Stability Test(p<.05). Conclusion: The results of this study, both core exercise on stable surface and core exercise on unstable surface induced core muscle strengthening and balance ability. Expecially core exercise on unstable surface more effective to core muscle strengthening and balance ability.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.123-130
• /
• 2009

To understand the formation of core-shell structure in $BaTiO_3$ (BT) grains in multilayer ceramic capacitors, specimens were prepared with BT powders mixed with Y and Mg, and their microstructures were investigated with scanning electron microscopy, x-ray diffractometry, and transmission electron microscopy. Microstructural investigation showed that Y dissolved easily in BT lattice to a certain depth inside of the grain, whereas Mg tended to stay at grain boundaries rather than become incorporated into BT. It was considered that in case of Y and Mg addition in a proper ratio, Y could play a dominant role in the formation of shell leading to a slight dissolution of Mg in the shell. Next, the effects of ball-milling conditions on the core-shell formation were studied. As the ball-milling time increased, the milled powders did not show a significant change in size distribution but rather an increase of residual strain, which was attributed to the milling damage. The increase in milling damage facilitated the shell formation, leading to the increased shell portion in the core-shell grain.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.78-82
• /
• 2014

Power Transformers with more than one secondary winding are not uncommon in industrial applications. But new classes of applications where very large number of independent secondaries are used are becoming popular in controlled converters for medium and high voltage applications. Cascade H-bridge medium voltage drives and Pulse Step Modulation (PSM) based high voltage power supplies are such applications. Regulated high voltage power supplies (Fig. 1) with 35-100 kV, 5-10 MW output range with very fast dynamics (${\mu}S$ order) uses such transformers. Such power supplies are widely used in fusion research. Here series connection of isolated voltage sources with conventional switching semiconductor devices is achieved by large number of separate transformers or by single unit of multi-secondary transformer. Naturally, a transformer having numbers of secondary windings (~40) on single core is the preferred solution due to space and cost considerations. For design and simulation analysis of such a power supply, the model of a multi-secondary transformer poses special problem to any circuit analysis software as many simulation softwares provide transformer models with limited number (3-6) of secondary windings. Multi-Secondary transformer models with 3 different schemes are available. A comparison of test results from a practical Multi-secondary transformer with a simulation model using magnetic component is found to describe the behavior closer to observed test results. Earlier models assumed magnetising inductance in a linear loss less core model although in actual it is saturable core made-up of CRGO steel laminations. This article discusses a more detailed representation of flux coupled magnetic model with saturable core properties to simulate actual transformers very close to its observed parameters in test and actual usage.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.349-357
• /
• 2015

PURPOSE. The purpose of this study was to assess the impact of the core materials, thickness and fabrication methods of veneering porcelain on prosthesis fracture in the porcelain fused to metal and the porcelain veneered zirconia. MATERIALS AND METHODS. Forty nickel-chrome alloy cores and 40 zirconia cores were made. Half of each core group was 0.5 mm-in thickness and the other half was 1.0 mm-in thickness. Thus, there were four groups with 20 cores/group. Each group was divided into two subgroups with two different veneering methods (conventional powder/liquid layering technique and the heat-pressing technique). Tensile strength was measured using the biaxial flexural strength test based on the ISO standard 6872:2008 and Weibull analysis was conducted. Factors influencing fracture strength were analyzed through three-way ANOVA (${\alpha}{\leq}.05$) and the influence of core thickness and veneering method in each core materials was assessed using two-way ANOVA (${\alpha}{\leq}.05$). RESULTS. The biaxial flexural strength test showed that the fabrication method of veneering porcelain has the largest impact on the fracture strength followed by the core thickness and the core material. In the metal groups, both the core thickness and the fabrication method of the veneering porcelain significantly influenced on the fracture strength, while only the fabrication method affected the fracture strength in the zirconia groups. CONCLUSION. The fabrication method is more influential to the strength of a prosthesis compared to the core character determined by material and thickness of the core.

• 국제초고층학회논문집
• /
• 제10권3호
• /
• pp.203-210
• /
• 2021

With the development of urbanization, the increasing of buildings density in urban core areas result in the complexity of construction environment. High-rise landmark building is always preferred in the construction of urban core areas. Super high-rise buildings construction are facing construction management difficulties due to the complex working conditions and enormous building system, especially with the complex surrounding environment of the urban core area, the construction management of super high-rise buildings in the area requires higher, refined and detailed standard. Based on a super high-rise project in a core area of Shanghai which has 370 m building height and 772,643 m² building area, with complex surrounding environment, narrow construction site and many super-high-altitude crossing works. With the application of BIM technology, the Internet of Things, the LAN communication and other various intelligent mechanical equipment, information management systems, the efficiency and refinement of construction management are improved, ensuring the smooth implementation of the project while effectively controlling the impact on the surrounding environment.

• 한국간호교육학회지
• /
• 제28권4호
• /
• pp.378-388
• /
• 2022

Purpose: The purpose of this study was to evaluate the effects of Metaverse-based core nursing skill contents (CNSC) developed for undergraduate nursing students. Methods: A nonequivalent control group was sampled with a non-synchronized design. Seventy-two participants (experimental group 34, control group 38) were recruited from May to June 2022 in Gwangju metropolitan city. The CNSC consisted of scenarios of vital sign measurements, and subcutaneous injections (including blood sugar tests). The data were analyzed using SPSS version 25 for Windows. Results: At the completion of the CNSC, statistically differences were found between groups in knowledge of core nursing skills (t=6.20, p<.001), confidence in core nursing skills performance (t=5.71, p<.001), and clinical competency (t=3.32, p=.001). Conclusion: These results indicate that the CNSC developed for undergraduate nursing students is effective in improving knowledge of core nursing skills, confidence in core nursing skills performance, and clinical competency for nursing students.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2449-2452
• /
• 2009