References
- McLean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J 1965;119:251-67.
- Magne P, Belser U. The esthetic width in fixed porcelain restorations. Int J Prosthodont 1999;8:106-18. https://doi.org/10.1111/j.1532-849X.1999.tb00019.x
- Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of allceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 2004;20:449-56. https://doi.org/10.1016/j.dental.2003.05.002
- Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307. https://doi.org/10.1016/j.dental.2007.05.007
- Triwatana P, Nagaviroj N, Tulapornchai C. Clinical performance and failures of zirconia-based fixed partial dentures: a review literature. J Adv Prosthodont 2012;4:76-83. https://doi.org/10.4047/jap.2012.4.2.76
- Napankangas R, Raustia A. Twenty-year follow-up of metalceramic single crowns: a retrospective study. Int J Prosthodont 2008;21:307-11.
- Reitemeier B, Hansel K, Kastner C, Walter MH. Metal-ceramic failure in noble metal crowns: 7-year results of a prospective clinical trial in private practices. Int J Prosthodont 2006;19: 397-9.
- Sailer I, Feher A, Filser F, Gauckler LJ, Luthy H, Hammerle CHF. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont 2007;20:383-8.
- Sailer I, Feher A, Filser F, Luthy H, , Gauckler LJ, Scharer P, Hammerle CHF. Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up. Quintessence Int 2006;37:685-93.
- Agustin-Panadero R, Roman-Rodriguez JL, Ferreiroa A, Sola-Ruiz MF, Fons-Font A. Zirconia in fixed prosthesis: A literature review. J Clin Exp Dent 2014;6:e66-73.
- Quinn JB, Sundar V, Parry EE, Quinn GD. Comparison of edge chipping resistance of PFM and veneered zirconia specimens. Dent Mater 2010;26:13-20. https://doi.org/10.1016/j.dental.2009.08.005
- Alhasanyah A, Vaidyanathan TK, Flinton RJ. Effect of core thickness differences on post-fatigue indentation fracture resistance of veneered zirconia crowns. J Prosthodont 2013;22: 383-90. https://doi.org/10.1111/jopr.12016
- Millen CS, Reuben RL, Ibbetson RJ. The effect of coping/veneer thickness on the fracture toughness and residual stress of implant supported, cement retained zirconia and metal-ceramic crowns. Dent Mater 2012;28:e250-8. https://doi.org/10.1016/j.dental.2012.06.008
- Henriques B, Soares D, Silva FS. Shear bond strength of a hot pressed Au-Pd-Pt alloy-porcelain dental composite. J Mech Behav Biomed Mater 2011;4:1718-26. https://doi.org/10.1016/j.jmbbm.2011.05.029
- Rice RW. Limitations of pore-stress concentrations on the mechanical properties of porous materials. J Mater Sci 1997; 32:4731-6. https://doi.org/10.1023/A:1018674713006
- Anusavice KJ, Phillips RW. Science of dental materials. 11th ed. St. Louis, Mo.: Saunders; 2003, p. 665-719.
- Nakamura T, Wakabayashi K, Kawamura Y, Kinuta S, Mutobe Y, Yatani H. Analysis of internal defects in all-ceramic crowns using micro-focus X-ray computed tomography. Dent Mater J 2007;26:598-601. https://doi.org/10.4012/dmj.26.598
- Ban S, Anusavice KJ. Influence of test method on failure stress of brittle dental materials. J Dent Res 1990;69:1791-9. https://doi.org/10.1177/00220345900690120201
- Ban S, Hasegawa J, Anusavice KJ. Effect of loading conditions on bi-axial flexure strength of dental cements. Dent Mater 1992;8:100-4. https://doi.org/10.1016/0109-5641(92)90063-I
- Lin WS, Ercoli C, Feng C, Morton D. The effect of core material, veneering porcelain, and fabrication technique on the biaxial flexural strength and weibull analysis of selected dental ceramics. J Prosthodont 2012;21:353-62. https://doi.org/10.1111/j.1532-849X.2012.00845.x
- Aboushelib MN1, de Kler M, van der Zel JM, Feilzer AJ. Effect of veneering method on the fracture and bond strength of bilayered zirconia restorations. Int J Prosthodont 2008;21:237-40.
- Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics. Dent Mater 2006;22:857-63. https://doi.org/10.1016/j.dental.2005.11.014
- Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part 3: double veneer technique. J Prosthodont 2008;17:9-13.
- Christensen GJ. PFM vs. zirconia restorations-how are they comparing clinically? Clinician's Report. CR found 2008;11:1-2.
- Gonzaga CC, Cesar PF, Miranda WG Jr, Yoshimura HN. Slow crack growth and reliability of dental ceramics. Dent Mater 2011;27:394-406. https://doi.org/10.1016/j.dental.2010.10.025
Cited by
- Influence of veneering technique and veneer-coping thickness on fracture toughness of implant retained veneered Y-TZP zirconia crowns vol.31, pp.16, 2017, https://doi.org/10.1080/01694243.2016.1277863
- Influence of core thickness and artificial aging on the biaxial flexural strength of different all-ceramic materials: An in-vitro study vol.36, pp.3, 2017, https://doi.org/10.4012/dmj.2016-157
- Comparison of Adhesion of a Novel Pre-sintered Cobalt-Chromium to Pre-sintered Zirconia and Cast Nickel-Chromium vol.19, pp.7, 2015, https://doi.org/10.5005/jp-journals-10024-2341
- Debonding/crack initiation and flexural strengths of bilayered zirconia core and veneering ceramic composites vol.39, pp.2, 2015, https://doi.org/10.4012/dmj.2018-321
- Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing vol.65, pp.2, 2015, https://doi.org/10.2186/jpr.jpor_2019_336
- The number of specimens in a furnace affects the biaxial flexural strength of veneered zirconia specimens after sintering vol.35, pp.6, 2021, https://doi.org/10.1080/01694243.2020.1816790