• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.935-944
• /
• 2009

Recently, many researches focus on Ubiquitous Network which comprised various networks for effective service provision. In particular, OSGi proposed by OSGi Alliance is preferred for core infrastructure to establish Ubiquitous Network as it supports integration and inter-operation among various service environments, and dynamic configuration of services. However, OSGi is limited to be used only within local service framework, since OSGi specification does not have any considerations for inter-operations between internal and external services. Thus, in this paper we propose JARSIO(JAva Remote Service Invocation for OSGi) framework which enables the inter-operations of dynamic internal OSGi services and other external services. The proposed framework is based on the TCP/IP protocol, and provides effective mechanisms for the inter-operations of the services.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.1-11
• /
• 2018

Discrete event system specification (DEVS) has been used in many simulations including hybrid systems featuring both discrete and continuous behavior that require a lot of time to get results. Therefore, in this study, we proposed the acceleration of a DEVS-based hybrid system simulation using multi-cores and GPUs tightly coupled computing. We analyzed the proposed heterogeneous computing of the simulation in terms of the configuration of the target device, changing simulation parameters, and power consumption for efficient simulation. The result revealed that the proposed architecture offers an advantage for high-performance simulation in terms of execution time, although more power consumption is required. With these results, we discovered that our approach is applicable in hybrid system simulation, and we demonstrated the possibility of optimized hardware distribution in terms of power consumption versus execution time via experiments in the proposed architecture.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.75-83
• /
• 2012

Recent science technology research network moves to establish logical private network among specific research groups such as high energy physics and climate, requiring to implement private network by group for each purpose. Up to now, national research networks such as KREONET service high capacity logical private networks. Therefore standardized configuration and management scheme is essential for the deployment of logical private network. In this study, we propose the core service element and protocols for the logical networks over Layer 2 networks. We also propose system architecture that make monitoring and management easier. After that we design and implement monitoring map for logical network based on scheme. For this purpose, we also propose the description system for logical research network to provide data such as operation information, formation information, performance information and failure information of network infrastructure resource.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.316-321
• /
• 2017

With the recent wide adoption of Linux in the fields of IoT, embedded, mobile, desktop and server industries, the importances of understanding the Linux system architecture as well as customizing the Linux system are increasing very steeply. Accordingly, the capabilities of building every component of Linux system from source code files have been important. The LFS (Linux From Scratch) site[1] guides the steps of building the basic Linux system from source files. The steps consist of build host preparation step, temporary system building step, final system building step, and system configuration and boot preparation step. However, the underlying concepts behind the steps used in building LFS are difficult to understand, particularly to the beginner. This paper analyzes the LFS build steps and reveal the core build concepts and principles used in each step. Additionally, this paper shows the measured package build times obtained from our build experience.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.444-457
• /
• 2014

This paper presents the design and realization of a digital PV simulator with a Push-Pull Forward (PPF) circuit based on the principle of modular hardware and configurable software. A PPF circuit is chosen as the main circuit to restrain the magnetic biasing of the core for a DC-DC converter and to reduce the spike of the turn-off voltage across every switch. Control and I/O interface based on a personal computer (PC) and multifunction data acquisition card, can conveniently achieve the data acquisition and configuration of the control algorithm and interface due to the abundant software resources of computers. In addition, the control program developed in Matlab/Simulink can conveniently construct and adjust both the models and parameters. It can also run in real-time under the external mode of Simulink by loading the modules of the Real-Time Windows Target. The mathematic models of the Push-Pull Forward circuit and the digital PV simulator are established in this paper by the state-space averaging method. The pole-zero cancellation technique is employed and then its controller parameters are systematically designed based on the performance analysis of the root loci of the closed current loop with $k_i$ and $R_L$ as variables. A fuzzy PI controller based on the Takagi-Sugeno fuzzy model is applied to regulate the controller parameters self-adaptively according to the change of $R_L$ and the operating point of the PV simulator to match the controller parameters with $R_L$. The stationary and dynamic performances of the PV simulator are tested by experiments, and the experimental results show that the PV simulator has the merits of a wide effective working range, high steady-state accuracy and good dynamic performances.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.340-348
• /
• 2006

This paper proposes an inrush current control technique of matching transformer for configuration of dynamic voltage restorer(DVR). The DVR system consist of PWM inverter to inject arbitrary voltage, LC low pass filter as harmonic eliminator and matching transformer for isolation. However, the matching transformer has an excess of inrush current by magnetic flux saturation in the core. Due to this inrush current, the rating of matching transformers is double for needed nominal rating for protection of DVR. Therefore, in this paper, the modeling method of magnetic flux saturation is used to analyze a magnitude of inrush current, and additional current controller is used for PWM inverter output regulation. Simulation and experimental results are provided to demonstrate the validity of the proposed control method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1543-1550
• /
• 2015

Ferroresonance is a non-linear vibrational phenomenon that is generated by the electrical interaction of the inductance component with the capacitor component of a certain capacitance as the device of the inductance component such as a transformer is saturated due to the degradation, the waveform distortion of current and voltage, and the oscillation of overcurrent and overvoltage in a system. Recently, ferroresonance was generated from the waveform distortion of current and voltage, or the overvoltage or undervoltage phenomenon caused by the nature of an electrical power system and design technology of the transformer in the three phase transformer system. Hence, in general, ferroresonance analyzed by converting to the LC equivalent circuit. However, in general, the aforementioned analytical method only applies to the resonance phenomenon that is generated by the interaction of the capacitance of bussbar and grounding, and switching as the capacitor component with PT and the transformer as the inductance component in a system. Subsequently, the condition where ferroresonance was generated since overvoltage was supplied as line voltage to the phase voltage and thus the iron core is saturated due to the interconnection between grounded and ungrounded systems could not be analyzed when single phase PT was connected in a ${\Delta}$/Y connection system. In this study, voltage swell in the configuration of grounded circuit of a step-up transformer with the ${\Delta}-{\Delta}$ connection linked to PT for control power and the ferroresonance generated by overvoltage when the line voltage of the ${\Delta}-{\Delta}$ connection was connected to the phase voltage of the grounded Y-Y connection were analyzed using PSCAD / EMTDC through the failure case of the transformer caused by ferroresonance in the system with the ${\Delta}-{\Delta}$/Y-Y connection, and subsequently, the preventive measure of ferroresonance was proposed.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.785-791
• /
• 2013

Recently, Elevator industry is pursuing new challenges to the model of the IT convergence. The core of the convergence technologies may be the effective control and maintenance of the machine. However, because current elevator management model provides each specific model for his elevator, the management models have a variety of heterogeneous configuration so that it makes management companies to manage the elevators with many overhead. In this paper, we propose the integration framework for the various elevator models. We use proposed system based on the Android framework that is rapidly expanding technology in the embedded environment, and we propose design approach for the integration of variety of lift devices so that it provide a more efficient and stable service environment. In this way, we could integrate various device models of an elevator for the management and maintenance effectively and quickly.

• Journal of Information Technology Services
• /
• v.18 no.3
• /
• pp.17-35
• /
• 2019

Call centers do not simply play a role of responding to customers' calls, but they have developed into a core unit for maintaining competitiveness through services, marketing, or sales. Since the service quality of call centers heavily affects customer satisfaction, organizations have focused on enhancing it by reducing waiting time and increasing service level. One of the techniques, which improve the service quality of call centers, is to employ multi-skilled agents that can handle more than one type of calls. This study deals with three issues relevant to multi-skilled agents. First, we analyze how the way of allocating a specific group of agents to a set of skills affects the performance of call centers. Secondly, we investigate the relationship between the number of multi-skilled agents and the performance of call centers. Finally, we examine the impact of agent selection rules on the performance of call centers. Two selection rules are compared : the first rule is to assign a call to any available agent at random while the other rule is to assign a call preferably to single-skilled agents over multi-skilled agents when applicable. Based on simulation experiments, we suggest three implications. First, as the length of cycles in the agent-skill configuration network becomes longer, call centers achieve higher service level and shorter waiting time. Secondly, simulation results show that as the portion of multi-skilled agents increases, the performance of call centers improves. However, most of the improvement is attained when the portion of multi-skilled agents is relatively low. Finally, the agent selection rules do not significantly affect the call centers' performance, but the rule of preferring single-skilled agents tends to distribute the workload among agents more equally.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.813-826
• /
• 2019

This paper is a study on the implementation of MAM(Media Asset Management) to utilize UHD contents as high quality broadcast material. The implementation method of this paper is to separate MAM roles with content management functions and transmission workflow functions from workflow, metadata and system interface related work, which are divided into core MAM and MAM-Ex structure. Through the method proposed in this paper, we improved the content management method by applying the page menu method to the material metadata modification and applying the template method to the material structure API. In addition, the storage of UHD material and the configuration of the component server are pooled without any distinction of channels, thereby enhancing the security of UHD transmission assets by minimizing the movement of contents together with broadcasting material protection.