• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2010

Diversity-multiplexing tradeoff (DMT) is an efficient tool to measure the performance of multiple-input and multiple-output (MIMO) systems and cooperative systems. Recently, cooperative multicast system with wireless network coding stretched tremendous interesting due to that it can drastically enhance the throughput of the wireless networks. It is desirable to apply DMT to the performance analysis on the multicast system with wireless network coding. In this paper, DMT is performed at the three proposed wireless network coding protocols, i.e., non-regenerative network coding (NRNC), regenerative complex field network coding (RCNC) and regenerative Galois field network coding (RGNC). The DMT analysis shows that under the same system performance, i.e., the same diversity gain, all the three network coding protocols outperform the traditional transmission scheme without network coding in terms of multiplexing gain. Our DMT analysis also exhibits the trends of the three network coding protocols' performance when multiplexing gain is changing from the lower region to the higher region. Monte-Carlo simulations verify the prediction of DMT.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.323-326
• /
• 1996

In this paper, we propose a new method of the communication system for cooperative behavior and control in a collective autonomous mobile robots. A communication function among the collective robots is essential to intelligent cooperation. In general, global communication is effective for small number of robots. However when the number of robot goes on increasing, this becomes difficult to be realized because of limited communication capacity and increasing amount of information to handle. And also the problems such as communication interference and improper message transmission occur. So we propose local communication system based on infrared sensor to realize the cooperative behavior and control as the solution of above problem. It is possible to prevent overflow of information and exchange of complex information by combining communicate a specific robot. At last we verify the effectiveness of the proposed communication system from example of cooperative behavior.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.463-471
• /
• 2011

Cooperative communications using relays in wireless networks have similar effects of multiple-input and multiple-output without the need of multiple antennas at each node. To implement cooperation into a system, efficient protocols are desired. In IEEE 802.11 families such as a/b/g, mobile stations can automatically adjust transmission rates according to channel conditions. However throughput performance degradation is observed by low-rate stations in multi-rate circumstances resulting in so-called performance anomaly. In this paper, we propose active relay-based cooperative medium access control (AR-CMAC) protocol, in which active relays desiring to transmit their own data for cooperation participate in relaying, and it is designed to increase throughput as a solution to performance anomaly. We have analyzed the performance of the simplified AR-CMAC using an embedded Markov chain model to demonstrate the gain of AR-CMAC and to verify it with our simulations. Simulations in an infrastructure network with an IEEE 802.11b/g access point show noticeable improvement than the legacy schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.107-112
• /
• 2009

Spectral efficiency of current two-phase cooperative communications protocols is low since in the second time the relay forwards the same signal received from the source to the destination, the source keeps silent in this time. In this paper, we propose a novel cooperative communications protocol where the signal needed to transmit to the destination is sent in both phases, the source and the relay also transmit different signal to the destination thus no loss of spectral efficiency. This protocol performs signal selection based on log-likelihood ratio (LLR) at relay and maximum likelihood (ML) detection at destination. While existing protocols pay for a worse performance than direct transmission in the low SNR regime which is of special interest in ad hoc networks, ours is better over the whole range of SNR. In addition, the proposal takes advantages of bandwidth efficiency, long delay and interference among many terminals in ad hoc network. Simulation results show that the proposed protocol can significantly save total energy for wireless ad hoc networks.

• ETRI Journal
• /
• v.43 no.1
• /
• pp.17-30
• /
• 2021

At present, multiple input multiple output radars offer accurate target detection and better target parameter estimation with higher resolution in high-speed wireless communication systems. This study focuses primarily on power allocation to improve the performance of radars owing to the sparsity of targets in the spatial velocity domain. First, the radars are clustered using the kernel fuzzy C-means algorithm. Next, cooperative and noncooperative clusters are extracted based on the distance measured using the kernel fuzzy C-means algorithm. The power is allocated to cooperative clusters using the Pareto optimality particle swarm optimization algorithm. In addition, the Nash equilibrium particle swarm optimization algorithm is used for allocating power in the noncooperative clusters. The process of allocating power to cooperative and noncooperative clusters reduces the overall transmission power of the radars. In the experimental section, the proposed method obtained the power consumption of 0.014 to 0.0119 at K = 2, M = 3 and K = 2, M = 3, which is better compared to the existing methodologies-generalized Nash game and cooperative and noncooperative game theory.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.30-35
• /
• 2022

Rendering is widely used for visual effects in animations and movies. Although rendering is computing-intensive, we observe that it accompanies heavy I/O because of large input data. This becomes technical hurdles for multi-node rendering performed on public cloud nodes. To reduce the overhead of data transmission in multi-node rendering, this paper analyzes the characteristics of rendering workloads, and presents the cooperative caching scheme for multi-node rendering. Our caching scheme has the function of synchronization between original data in local storage and cached data in rendering nodes, and the cached data are shared between multiple rendering nodes. We perform measurement experiments in real system environments and show that the proposed cooperative caching scheme improves the conventional caching scheme used in the network file system by 27% on average.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.168-174
• /
• 2015

In this paper, we analyze the performance of cooperative communication techniques on an underwater channel. By analyzing the BER performance of cooperative transmission protocol and combining types ERC, FRC, SNRC and ESNRC on underwater channel, through the result, we can choose an a proper cooperative technique for an underwater channel. The analysis of BER performance is achieved by a computer simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1668-1688
• /
• 2012

Cooperative communications and network coding schemes have been proposed to increase system throughput for ad hoc networks. In this paper, we present throughput and delay analysis of the new network coding-enabled cooperative MAC protocol called NC-MAC, which has been proposed by us in order to significantly enhance system performance. This protocol introduces an approach that can accommodate both cooperative communication and network coding for wireless ad hoc networks by slightly increasing overhead and modifying standards. The protocol's performance is evaluated using mathematical analysis and computer simulation and two performance measures, system throughput and average channel access delay, are used for a performance comparison with previous schemes. It is assumed that all the frames exchanged over a wireless channel are susceptible to transmission errors, which is a new but more reasonable assumption differentiating this research from previous research. Numerical results show this protocol provides significantly enhanced system performance compared with conventional cooperative MAC protocols used in previous research. For instance, system performance is 47% higher using the NC-MAC protocol than when using the rDCF protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10A
• /
• pp.972-979
• /
• 2008

Two-way relay channel is a bidirectional cooperative communication channel that two terminals communicate each other with the help of a relay. In the previous cooperative communication schemes, a relay uses two divided resources for bidirectional transmission. When a network coding is used at a relay, the relay can transmit bidirectional data to two terminals simultaneously using one resource only. Thus the throughput of this scheme is greater than that of the previous scheme. In this paper, we showa two-way cooperative ARQ protocol using network coding and the throughput of this protocol is analyzed using a state diagram.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.59-64
• /
• 2018

A cooperative spectrum sensing has been proposed to improve the sensing performance in cognitive radio (CR) network. However, cooperative sensing causes additional overhead for reporting the result of local sensing to the fusion center. In this paper, we propose a technique to reduce the overhead of data transmission of cooperative sensing for applying the quantum data fusion technique in cognitive radio networks by omitting the lowest quantized in the local sensed results. If a CR node senses the lowest quantized level, it will not send its local sensing data in the corresponding sensing period. The fusion center can implcitly know that a spectific CR node sensed lowest level if there is no report from that CR node. The goal of proposed sensing policy is to reduce the overhead of quantized data fusion scheme for cooperative sensing. Also, our scheme can be adapted to all quantized data fusion schemes because it only deal with the form of the quantized data report. The experimental results show that the proposed scheme improves performance in terms of reporting overhead.