• 태양에너지
• /
• 제18권3호
• /
• pp.177-183
• /
• 1998

본 논문은 미세캡슐을 함유한 축열장판의 열성능에 관해서 조사하였고 기존 시판되고 있는 장판과 비교를 하였다. 상변화물질로는 Myristic Acid($CH_3(CH_2)_{12}COOH$)를 사용했고 이 물질을 PMMA와 왁스로 3중 코팅을 하였고 $1{\sim}1.5mm$인 캡슐로 제조를 하였다. ANSI/ASHRAE를 토대로 하여 열전달 매체로 공기를 사용한 밀폐형 실험장치를 구성하였으며, 공기유량은 오리피스를 통해서 측정된다. 실험에 사용된 두 개의 서로다른 장판(미세캡슐 함유율 중량비 10% 장판, 0% 장판)의 열성능을 평가하기 위해서 서로다른 공기유량에 대해서 방열시 열전달 특성에 관한 실험을 수행하였다. 실험결과를 보면 방열과정시 미세캡슐 함유율이 10%인 장판의 표면온도는 미세캡슐을 함유하지 않은 장판보다 더 높은 온도를 유지했다. 그리고 장판표면에서의 열전달계수는 미세캡슐을 함유하지 않은 장판과 비교해 볼 때 미세캡슐을 함유한 장판에서 더 높게 나타났다.

• 한국수정란이식학회지
• /
• 제23권3호
• /
• pp.223-227
• /
• 2008

The cryopreservation of Hanwoo embryos has become an integral part of assisted reproduction in animal. The objective of this study was to assess the effect of The objectives of this study were: (1) to evaluate the influence of bovine embryo developmental stage on in vitro embryo development after freezing, (2) to study the efficiency compared with conventional freezed embryos at different embryo source. For conventional slow-freezing, day 7 or 8 expanded blastocysts were collected. The standard freezing medium was 1.8 M ethylene glycol (EG). Embryos were equilibrated in 1.8 Methylene glycol(EG) with 0.1 M sucrose in Dulbecco's phosphate-buffered saline (D-PBS) supplemented with 0.5% bovine serum albumin. Embryos were then loaded individually into 0.25 ml-straw and placed directly into cooling chamber of programmable freezer precooled to $-7^{\circ}C$, after 2 min, the straw was seeded, maintained at $-7^{\circ}C$ for 8 min, and then cooled to $-35^{\circ}C$ at $0.3^{\circ}C$/min, plunged and stored in liquid nitrogen for at least 3 days. For thawing, the straw containing embryos were warmed in air for 10 see and exposed to $37^{\circ}C$ water for 20 sec. Straws were then removed from $37^{\circ}C$ water. Rates of blastocyst survive and hatched were evaluated at 12 to 48h post-warming. The re-expansion and hatched rates of morula embryos were significantly lower than those obtained for blastocysts and expansion blastocysts (31.6%, 10.5% vs, 68.9%, 22.2% vs, 73.7%, 53.6%, respectively). No differences in re-expansion rates were found between in vivo and in vitro blastocysts. whereas hatched rates was significantly higher (51.2%) in vivo compared with in vitro embryos (18.6%). in conclusion, demonstrate that conventional freezing can be used successfully in cryopreservation of in vitro and in vivo bovine embryos, and that it might be considered for use in commercial programs and embryo preservation.

• Nuclear Engineering and Technology
• /
• 제46권4호
• /
• pp.547-556
• /
• 2014

Korea expects a shortage in storage capacity for spent fuels at reactor sites. Therefore, a need for more metal and/or concrete casks for storage systems is anticipated for either the reactor site or away from the reactor for interim storage. For the purpose of interim storage and transportation, a dual purpose metal cask that can load 21 spent fuel assemblies is being developed by Korea Radioactive Waste Management Corporation (KRMC) in Korea. At first the gamma and neutron flux for the design basis fuel were determined assuming in-core environment (the temperature, pressure, etc. of the moderator, boron, cladding, $UO_2$ pellets) in which the design basis fuel is loaded, as input data. The evaluation simulated burnup up to 45,000 MWD/MTU and decay during ten years of cooling using the SAS2H/OGIGEN-S module of the SCALE5.1 system. The results from the source term evaluation were used as input data for the final shielding evaluation utilizing the MCNP Code, which yielded the effective dose rate. The design of the cask is based on the safety requirements for normal storage conditions under 10 CFR Part 72. A radiation shielding analysis of the metal storage cask optimized for loading 21 design basis fuels was performed for two cases; one for a single cask and the other for a $2{\times}10$ cask array. For the single cask, dose rates at the external surface of the metal cask, 1m and 2m away from the cask surface, were evaluated. For the $2{\times}10$ cask array, dose rates at the center point of the array and at the center of the casks' height were evaluated. The results of the shielding analysis for the single cask show that dose rates were considerably higher at the lower side (from the bottom of the cask to the bottom of the neutron shielding) of the cask, at over 2mSv/hr at the external surface of the cask. However, this is not considered to be a significant issue since additional shielding will be installed at the storage facility. The shielding analysis results for the $2{\times}10$ cask array showed exponential decrease with distance off the sources. The controlled area boundary was calculated to be approximately 280m from the array, with a dose rate of 25mrem/yr. Actual dose rates within the controlled area boundary will be lower than 25mrem/yr, due to the decay of radioactivity of spent fuel in storage.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1049-1061
• /
• 2013

본 연구에서는 현장타설 에너지파일의 열교환 파이프 배치 형태별 열교환율을 전산유체해석 프로그램(FLUENT)을 이용하여 평가하고, 이를 이용하여 에너지파일의 설계법을 제시하였다. 등가열교환율을 산정하기 위해 동일한 현장타설말뚝 제원에 대해 열교환파이프 배치 형태를 W-형(직렬), 복합 U-형(병렬 4쌍), 나선형의 3가지로 고려하였다. 건물측 부하조건은 여름철 냉방운용를 모사하기 위해 순환수의 에너지파일 유입온도, 즉 히트펌프 유출온도(Leaving water temperature, LWT)를 $35^{\circ}C$로 일정하게 유지하여 에너지파일 유출온도, 즉 히트펌프 유입온도(Entering water temperature, EWT) 변화를 관찰하였다. 지반에 최대 가상부하를 적용한 경우(100시간 연속 냉방부하 조건)에는 3가지 열교환기 형태가 유사한 열교환율을 보인 반면, 실제 히트펌프 가동에 의한 건물 냉방운용을 모사하기 위해 간헐적으로 일일 8시간 운용-16시간 정지를 7일간 반복 해석한 경우에는 W-형(직렬연결)과 복합 U-형(병렬 4쌍) 열교환기는 유사한 열교환율을 보이나, 나선형 열교환기는 파이프 루프 상호 간 열간섭으로 인해 복합 U-형 열교환기에 비해 약 86%의 열교환율을 갖는 것으로 평가되었다. 전산유체해석에 의해 계산된 열교환파이프 배치 형태별 에너지파일의 등가열교환율을 에너지파일 설계프로그램(PILESIM2)에 적용하여 다양한 형상의 현장타설 에너지파일에 대한 설계법과 대표적인 설계변수에 대한 설계도표를 제시하였다.

• Journal of Plant Biotechnology
• /
• 제7권3호
• /
• pp.183-186
• /
• 2005

Cryopreservation has been recognized as a practical and efficient tool for the long-term storage of vegetatively propagated plants. This study was conducted to investigate the effects of slow-freezing techniques on the cryopreservation of potato. In vitro plantlets of the potato genotypes of 'Atlantic', 'Superior’, 'Namseo', 'J138', and 'CTO5-5' were cold acclimated, and the excised axillary buds were precultured, osmoprotected, exposed to plant vitrification solution, frozen slowly to $-40^{\circ}C$ and then rapidly plunged into liquid nitrogen, thawed and finally plated on the regeneration medium. It was found that the higher the sucrose concentrations in the subculture medium of donor plantlets, the higher the survival rates of shoot tips after cryopreservation, and the highest survival (20%) was observed in the medium added with 0.25 M sucrose. As for the effect of cooling, $0.3^{\circ}C/min$ cooling speed showed the highest survival (25%). Different varieties showed different responses over different cryopreservation treatments. Survival rate was increased by slow-freezing technique method as compared with that of the basic cryopreservation method of vitrification alone in the diverse potato genotypes. Leaf and tuber morphologies of potatoes regenerated after cryopreservation using slow freezing technique were similar to those derived from the in vitro stock plantlets.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.86-93
• /
• 2009

The crack formation and the resistance of ITO film on PET substrate with a thickness of 20 nm were investigated as a function of strain. The onset strain for the increase of resistance increased with increasing strain rate, suggesting the crack initiation is dependent on the strain rate. Electrical resistance increased at the strain of 1.6% at the strain rates below $10^{-4}/sec$ while it increased at ${\sim}2%$ at the strain rates above $10^{-3}/sec$. The critical strain at which the cracks were formed is close to the proportional limit. Upon loading, the initial cracks perpendicular to the tensile axis were observed and propagated the whole sample width with increasing strain. The spacing between horizontal cracks is thought to be determined by the fracture strength and the interfacial strength between ITO and PET. The crack density increased with increasing strain. However, the effect of the strain rate on the crack density was less pronounced in ITO/PET with 20 nm ITO thickness than ITO/PET with 125 nm ITO thickness, the strength of ITO film is thought to increase as the thickness on ITO film decreases. The absence of cracks on ITO film at a strain as close as 1.5% can be attributed to the compressive residual stress of ITO film which was developed during cooling after the coating process. The higher critical strain for the onset of the resistance increase and the crack initiation of ITO/PET with a thinner ITO film (20 nm) can be linked with the higher strength of the thinner ITO film.

• 자원환경지질
• /
• 제40권6호
• /
• pp.833-841
• /
• 2007

지하수열펌프시스템(GWHP)은 지원열펌프시스템(GSHP)가운데 성능이 가장 우수하며 저온의 천부지하수열을 이용하는 시스템이다. GWHP시스템은 지중연결 열펌프시스템(GCHP)에 비해 최대 블록부하와 전 시스템 성능에 부합되는 지하수유량을 기준으로 하여 설계를 하며 최적 지하수유량은 해당지역의 지하수온도, 판형열교환기의 규격과 전체펌프와 배관류의 전 양정고에 따라 결정한다. 대체적으로 전형적인 빌딩루프순환수의 필요유량은 1RT당 $9.5{\sim}11.4lpm$ 정도인데 비해 GWHP시스템이 필요로 하는 최적 지하수유량은 이보다 꿜씬 적은 $3.8{\sim}9.5lpm$정도이다.

• 한국임상수의학회지
• /
• 제21권3호
• /
• pp.270-275
• /
• 2004

Anesthetic machines may be equipped with either a precision or nonprecision vaporizer. A precision vaporizer is designed to deliver an exact concentration of anesthetic agent. Goldman vaporizer is a low-flow, closed-circle circuit with a low resistance vaporizer, in circuit. Vaporizers used within circle system(VIC) are not usually temperature compensated and this is generally thought to be a disadvantage. As the volatile agent is vaporized, heat is extracted from the liquid and temperature decreases. This cooling of the liquid leads to a decrease in concentration of the anaesthetic agent delivered by the vaporizer. The purpose of this study is to examine the mechanical consistency of the delivery of isoflurane from Goldman vaporizer and precision vaporizer at various gas flow rates and temperatures. And we first studied isoflurane concentration according to room temperature changes delivered by a Goldman vaporizer and precision vaporizer using different gas flow. The room temperature of $15^{\circ}C,$ $20^{\circ}C,$ $28^{\circ}C$ and fresh gas flow rates of 0.5, 1.0, 1.5, 2.0, 3.0 l/min were used. The inspired agent concentration was measured using a Datex-Ohmeda multigas analyzer. As rose in room temperature, the isoflurane concentration of precision vaporizer approximated the dial setting. On the other hand, at a dial setting concentration of 5.0 percent the delivered isoflurane concentration of precision vaporizer was more than the dial setting in high temperature. The isoflurane concentration of precision vaporizer remained constant despite the increase in temperature. The isoflurane concentration of Goldman vaporizer was increased with rise in room temperature and decreased with rise in gas flow.

• 대한기계학회논문집B
• /
• 제40권2호
• /
• pp.119-126
• /
• 2016

본 연구는 실험적인 방법과 열유동 해석 방법을 사용하여 대용량 압출형 히트싱크의 방열성능에 미치는 열원 대칭배열의 영향을 고찰하고, 이를 바탕으로 제조원가가 낮은 고효율의 히트싱크를 제안하고자 한다. 실험결과를 통해서 유사한 유효 유동단면적을 가지는 경우에 히트싱크의 전열면적이 방열성능에 큰 영향을 줌을 확인할 수 있었으며, 히트싱크의 양면 모두를 이용하는 방열이 훨씬 효과적인 방열이 가능함을 알 수 있었다. 또한, 대칭으로 열원을 배치한 경우가 비대칭 배치보다 효율적으로 방열됨을 알 수 있었다. 해석연구의 결과를 통해서는 실험결과와 정성적으로는 유사한 경향을 확인할 수 있었으며, 실험연구에서 확인하지 못한 질량유량별 및 투입열량별 추이, 단면과 양면 사용의 정량적 비교 등이 가능하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제14권1호
• /
• pp.51-59
• /
• 1987

The present experiments have been bone to verify the effects of the warming rate and the degenerated blastomere(s) on further development of the frozen and thawed 4- and 8-cell mouse embryos. The embryos obtained from the mouse superovulated and mated were frozen in the solution of 15M DMSO in PBS containing 10% FCS at a slowly cooling rate($0.3^{\circ}C/min$). Two methods of warming slowly($8^{\circ}C/min$) and quickly ($450^{\circ}C/min$) were applied for thawing embryos. The thawed embryos were grouped according to the number of healthy blastomere(s) in the embryos. Some of the embryos were eliminated their degenerated blastomere(s) by means of a micromanipulation technique. The embryos were examined their developmental phases after 48 or 72 hrs incubation. The rates of blastocyst development from the frozen and thawed 4- and 8-cell embryos were 72.7% and 73.5%, respectively in case of thawing slowly, and were 78.9% and 80.0%, respectively in case of thawing quickly. The rate in case of thawing quickly was significantly higher than that in case of thawing slowly. The rates of blastocyst development from the frozen and thawed 4- and 8-cell embryos eliminated their degenerated blastomere(s) increased 5.9% and 24.4%, respectively compared with those of control groups not eliminated. The more number of degenerated blastomere(s) were eliminated from the embryos, the higher rate of blastocyst development was shown. It may be concluded from the results that the quickly thawing method is better for increasing survival rate than the slowly thawing one, and that the degenerated blastomere(s) in the frozen and thawed embryos affects as an interfering factor for further development of the embryos.