• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.373-381
• /
• 2019

Site-directed mutagenesis was employed to generate five different triple point mutations in the double mutant (C295A/I86A) of Thermoanaerobacter ethanolicus alcohol dehydrogenase (TeSADH) by computer-aided modeling with the aim of widening the small alkyl-binding pocket. TeSADH engineering enables the enzyme to accept sterically hindered substrates that could not be accepted by the wild-type enzyme. The underline in the mutations highlights the additional point mutation on the double mutant TeSADH introduced in this work. The catalytic efficiency ($k_{cat}/K_M$) of the ${\underline{M151A}}$/C295A/I86A triple TeSADH mutant for acetophenone increased about 4.8-fold higher than that of the double mutant. A 2.4-fold increase in conversion of 3'-methylacetophenone to (R)-1-(3-methylphenyl)-ethanol with a yield of 87% was obtained by using ${\underline{V115A}}$/C295A/I86A mutant in asymmetric reduction. The ${\underline{A85G}}$/C295A/I86A mutant also produced (R)-1-(3-methylphenyl)-ethanol (1.7-fold) from 3'-methylacetophenone and (R)-1-(3-methoxyphenyl)-ethanol (1.2-fold) from 3'-methoxyacetophenone, with improved yield. In terms of thermal stability, the ${\underline{M151A}}$/C295A/I86A and ${\underline{V115A}}$/C295A/I86A mutants significantly increased ${\Delta}T_{1/2}$ by $+6.8^{\circ}C$ and $+2.4^{\circ}C$, respectively, with thermal deactivation constant ($k_d$) close to the wild-type enzyme. The ${\underline{M151A}}$/C295A/I86A mutant reacts optimally at $70^{\circ}C$ with almost 4 times more residual activity than the wild type. Considering broad substrate tolerance and thermal stability together, it would be promising to produce (R)-1-(3-methylphenyl)-ethanol from 3'-methylacetophenone by ${\underline{V115A}}$/C295A/I86A, and (R)-1-phenylethanol from acetophenone by ${\underline{M151A}}$/C295A/I86A mutant, in large-scale bioreduction processes.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.824-839
• /
• 2020

The current study was aimed to examine the effect of partial or complete replacement of fishmeal (FM) with fermented soybean meal (FSBM) on growth performance, fecal composition, and meat quality in broiler chickens. A total number of 240 one-day-old broiler chicks were randomly allotted into four dietary treatments with six replications and ten birds per one pen. Dietary treatments were followed as; 1) Diet incorporated with 4% FM without FSBM (Control), 2) Diet incorporated with 3% FM and 2% FSBM (FSBM2), 3) Diet incorporated with 2% FM and 3% FSBM (FSBM3) and 4) Diet incorporated with 4% FSBM without FM (FSBM4). Body weight and feed intake were recorded weekly for 35 days of the experimental period. Moreover, fecal samples were collected to evaluate moisture, ash, nitrogen, calcium and phosphorus content on day 21 post-hatch. On day 35, two birds were sacrificed from each pen to measure meat quality parameters and visceral organ weights. Results revealed that, no dietary treatment effect (p > 0.05) was observed either in both body weight or average daily gain of broilers within the entire experimental period while broilers fed FSBM2 increased (p < 0.05) average daily feed intake by 10.07% whereas FSBM4 improved (p < 0.05) feed efficiency ratio by 8.45% compared to birds fed other dietary treatments on day 7 post-hatch. Besides, birds fed FSBM3 obtained the improved (p < 0.05) feed conversion ratio over the birds fed control diet by 7.51% from hatch to day 35 post-hatch (1.60 vs. 1.73). Nevertheless, no difference (p > 0.05) was detected on visceral organ weight, proximate composition and physicochemical characteristics of meat while broilers offered FSBM4 obtained the lowest (p < 0.05) calcium and phosphorous in faces (2.27% and 1.21% respectively) over those offered control feed and other FSBM treatments. In conclusion, FSBM would be a better replacement for ousting FM partially or completely in broiler diet as it did not impair the growth performance and meat quality while reducing the calcium and phosphorous excretion in broilers for 35 days post-hatch.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.57-65
• /
• 2011

Numerical simulations by three-dimensional Particle Flow Code($PFC^{3D}$, Itasca) considering distinct element method (DEM) were carried out for prediction of triaxial compression test with sand material. The effect of scale conditions for numerical model and distinct material on final prediction results was analyzed by numerical models under various scale conditions, and following observations were made from the numerical experiments. It is very useful to model the initial material condition without any porosity conversion from 2-D to 3-D DEM. Numerical experiments have shown that in all cases considered, 3D distinct element modeling could provide good agreement on stress-strain behavior, volume change and strength properties with laboratory testing results. It was important thing to assess reasonable scale ratio of numerical model and distinct elements for saving calculation time and securing calculation efficiency under condition with accuracy and appropriateness as numerical laboratory. As results of DEM simulations under various scale conditions, most of results show that shear strength properties as cohesion and internal friction angle are similar in condition of $D_{mod}/D_{gmax}$ < 10. It shows that 3-D distinct element method could be used as efficient tool to assess strength properties by numerical laboratory technique.

• Microbiology and Biotechnology Letters
• /
• v.49 no.4
• /
• pp.559-565
• /
• 2021

This study aimed to optimize gamma-aminobutyric acid (GABA) production by employing five strains of lactic acid bacteria (LAB) that were capable of high cell growth and GABA production using a modified synthetic medium. GABA production in the strains was qualitatively confirmed via detection of colored spots using thin layer chromatography. Lactobacillus plantarum SGL058 and Lactococcus lactis SGL027 were selected as the suitable strains for GABA production. The conditions of the carbon and nitrogen sources were determined as 5 g/l glucose (L. plantarum SGL058), 5 g/l lactose (L. lactis SGL027), 10 g/l yeast extract (L. plantarum SGL058), and 20 g/l yeast extract (L. lactis SGL027) for GABA production. The cell growth, monitored by optical density at 600 nm, was 5.93 for L. plantarum SGL058. This value was higher than the 3.04 produced by L. lactis SGL027 at 36 h using a 5-L fermenter. The highest concentration of GABA produced was 546.7 ㎍/ml by L. plantarum SGL058 and 404.6 ㎍/ml by L. lactis SGL027, representing a GABA conversion efficiency of (%, w/w) of 4.0% and 3.4%, respectively. The fermentation profiles of L. plantarum SGL058 and L. lactis SGL027 provide a basis for the utilization of LAB in GABA production using a basal synthetic medium.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.251-258
• /
• 2022

In the cement industry, in order to reduce CO₂ emissions, technology for raw materials substitution and conversion, technology for improving process efficiency of utilizing low-carbon new heat sources, and technology for collecting and recycling process-generated CO₂ are being developed. In this study, we conducted a basic experiment to contribute to the development of CSC that can store CO₂ as carbonate minerals among process-generated CO₂ capture and recycling technologies. Three types of CSC clinker with different SiO₂/(CaO+SiO₂) molar ratios were prepared with the clinker raw material formulation, and the characteristics of the clinker were analyzed. As a result of analysis and observation of CSC clinker, wollastonite and rankinite were formed. In addition, as a result of the carbonation test of the CSC paste, it was confirmed that calcite was produced as a carbonation product. The lower the SiO₂/(CaO+SiO₂) molar ratio in the CSC clinker chemical composition, the lower the wollastonite production amount, and the higher the rankinite production amount. And the amount of calcite production increased with the progress of carbonation of the CSC paste specimen. It is judged that rankinite is more reactive in mineralizing CO₂ than wollastonite.

• Korean Journal of Poultry Science
• /
• v.49 no.2
• /
• pp.61-67
• /
• 2022

The effects of dietary exogenous hydrophilic emulsifiers on the growth, nutrient digestibility, and carcass characteristics of broilers were evaluated. A total of 200 one-day-old broilers (Ross 308) were allotted to one of four treatment groups in a randomized complete block design in five replicates with 10 birds per pen during a 5-week growth experimental period. Birds were fed a corn-soybean meal-based diet with or without the addition of 0.025, 0.050, or 0.075% exogenous hydrophilic emulsifiers. The diets contained 3,025 and 3,075 metabolizable energy/kg for Phases 1 and 2, respectively. For each phase and the overall experimental period, body weight gain (linear, P<0.05) and feed conversion ratio (linear, P<0.05) improved in proportion to the dietary exogenous hydrophilic emulsifier level, while the average daily feed intake was not affected by dietary treatment. Improvement in growth performance by dietary treatments was observed during the last two weeks rather than the first three weeks of the growth phase. In carcass traits, abdominal fat content increased as dietary exogenous hydrophilic emulsifier level increased (linear, P<0.05), whereas dietary emulsifier level did not affect the relative weight of the liver, breast, and leg muscles. In conclusion, addition of dietary exogenous hydrophilic emulsifiers from 0 to 0.075% in broiler diets improved the growth rate and feed efficiency of broilers without any deleterious effects on nutrient digestibility, although a corn-soybean meal-based diet had less energy content (3,025 and 3,075 metabolizable energy/kg) for 0-3 weeks and 3-5 weeks, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.105-114
• /
• 2022

As the national income level is improving, housing urbanization and economic speed are progressing rapidly, household waste and food waste are rapidly increasing. The "Waste Management Act" (founded in 1991) introduced the volume-based household waste system in 1995, and even after implementation, the odor of food waste and the prompt disposal process continue to be a social problem.For this reason, the food waste recycling business is attracting attention. In this paper, regarding the role of resource recycling such as feed, compost, and other resources of food waste, this thesis aims to reduce the inefficiency of the recycling process. Data Envelopment Analysis (DEA) of the relationship between inputs and outputs of 33 facilities nationwide, excluding facility data (insufficient) among 394, (238 public, and 156 private ones), as of the end of 2020, which is running a domestic resource recycling project This study was conducted to investigate the important role in the relative management performance of food waste recycling facilities.It was hypothesized that the influence of business history, facility capacity, capital, and machinery of a company running a food waste recycling business on sales was tested.

• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1643-1652
• /
• 2021

Objective: Two experiments were conducted to provide a new approach for evaluating feed nutritional value by metabolizable glucose (MG) in piglet diets with different levels of starch and crude fiber. In Exp 1, a regression equation for MG was generated. In Exp 2, the equation was verified, and the optimal growth performance of piglets under appropriate MG levels was tested. Methods: In Exp 1, 20 weaned piglets (7.74±0.81 kg body weight [BW]) were randomly assigned to 1 of 4 treatments, including the basal diet containing different levels of MG (starch, 25.80%, 31.67%, 45.71%, 49.36%; crude fiber, 1.23%, 1.35%, 1.80%, 1.51%). The piglets were implanted with an ileal fistula, cannulation of the carotid artery, portal vein, and mesenteric artery. The chyme from the ileum fistula and blood samples were collected. In Exp 2, 30 weaned piglets (8.96±0.50 kg BW) were randomly assigned to 1 of 5 treatments, including the experimental diets with different levels of MG (37.6, 132.5, 300.0, 354.3, and 412.5 g/kg). The piglets' BW, and feed consumption were recorded to calculate growth performance during the 28-d experiment. Results: In Exp 1, the MG levels in 4 diets were 239.62, 280.68, 400.79, and 454.35 g/kg. The regression equation for the MG levels and dietary nutrients was: Y (MG) = 12.13×X₁ (starch)+23.18×X₂ (crude fiber)-196.44 (R² = 0.9989, p = 0.033). In Exp 2, treatments with 132.5 and 300.0 g/kg MG significantly (p<0.05) increased average daily gain and feed conversion efficiency of weaned piglets, increased digestibility of crude fat, and had no effect on digestibility of crude protein compared to 300.0 to 412.5 g/kg MG. Conclusion: The pig model combining the ileum fistula and cannulation of blood vessels was successfully used to determine the dietary MG levels. The recommended MG level in weaned pig diets is 132.5 to 300.0 g/kg.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1124-1128
• /
• 2021

As regulations of emissions from ships become more stringent, electric propulsion systems have been increasingly used to solve this problem in vessels ranging from large merchant ships to small and medium-sized ships. Methods for improving the efficiency of the electric propulsion system include the improvement of power sources; the use of a system linked to environmentally friendly power sources, such as batteries, fuel cells, and solar power; and the development of hardware and control methodology for rectifiers, power conversion devices, and propulsion motors. The method using a phase-shifting transformer with diodes has been widely used for rectification. Power semiconductor devices with grid connection to an environmentally friendly power source using DC distribution, a variable speed power source, and the application of small and medium-sized electric propulsion systems have been developed. Accordingly, the demand for active front-end (AFE) rectifiers is increasing. In this study, a method using a neural network rather than a conventional proportional-integral controller was proposed to control the AFE rectifier. Tested controller data were used to design a neural network controller trained through MATLAB/Simulink. The neural network controller was applied to a rectification system designed using PSIM software. The results indicated the effectiveness of improving the waveform and power factor DC output stage according to the load variation. The proposed system can be applied as a rectification system for small and medium-sized environmentally friendly ships.

• Journal of Biomedical Engineering Research
• /
• v.44 no.1
• /
• pp.73-79
• /
• 2023

The purpose of this study is to derive medical devices with different management systems through comparison of domestic and overseas medical device product classification systems and to propose management conversion measures for the products. The definitions of medical devices were compared and the scope of medical devices defined by each country was confirmed through surveys of the Medical Device Act, Federal Food, Drug & Cosmetics Act (FD&C) in the U.S., and Medical Device Regulations (MDR) in Europe. Using the Ministry of Food and Drug Safety's regulations on medical device products and grades, 21 CFR part 860-892 and product code classification files in U.S., and EMDN in Europe as basic data to compare medical device products and derive medical devices with different management systems. As a result of comparing the definition and product classification systems of medical devices in Korea, the U.S. and Europe, medical device accessories, prosthetic limbs and aids among assistive devices for persons with disabilities, drugs, quasi-drugs and industrial products that are not managed by medical devices in Korea are managed as medical devices in the U.S. and Europe. This study aims to improve public health by securing systematic product safety management and essential performance under medical device regulations. Management within a single medical device system will increase the efficiency of licensing work of domestic medical device manufacturers and related organizations. It is also expected to help advance the system according to the international harmony of the item classification system and enhance smooth import and export competitiveness.