• Clean Technology
• /
• v.26 no.3
• /
• pp.186-195
• /
• 2020

The isothermal adsorption, dynamic, and thermodynamic parameters of Acid black (AB) and Quinoline yellow (QY) adsorption by activated carbon were investigated using the initial concentration, contact time, temperature, and pH of the dyes as adsorption parameters. The adsorption equilibrium data fits the Freundlich isothermal adsorption model, and the calculated Freundlich separation factor values found that activated carbon can effectively remove AB and QY. Comparing the kinetic data showed that the pseudo second order model was within 10% error in the adsorption process. The intraparticle diffusion equation results were divided into two straight lines. Since the slope of the intraparticle diffusion line was smaller than the slope of the boundary layer diffusion line, it was confirmed that intraparticle diffusion was the rate-controlling step. The thermodynamic experiments indicated that the activation energies of AB and QY were 19.87 kJ mol^-1 and 14.17 kJ mol^-1, which corresponded with the physical adsorption process (5 ~ 40 kJ mol^-1). The adsorption reaction was spontaneous because the free energy change in the adsorption of AB and QY by activated carbon was negative from 298 to 318 K. As the temperature increased, the free energy value decreased resulting in higher spontaneity. Adsorption of AB and QY by activated carbon showed the highest adsorption removal rate at pH 3 due to the effect of anions generated by dissociation. The adsorption mechanism was electrostatic attraction.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.107-112
• /
• 2010

The Cu$(In_{1-x}Ga_x)Se_2$ is the absorber material for thin film solar cell with high absorption coefficient of $1{\times}10^5cm^{-1}$. In the case of CIGS, the movable energy band gap from $CuInSe_2$ (1.00 eV) to $CuGaSe_2$ (1.68 eV) can be acquired while controlling Ga contain ratio. Generally, the co-evaporator method have used for development and fabrication of the CIGS absorption layer. However, this method should need many steps and lengthy deposition time with high temperature. For these reasons, in this paper, a new growth method of CIGS layer was attempted to hydride vapor transport (HVT) method. The CIGS mixed-source material reacted for HCl gas in the source zone was deposited on the substrate after transporting to growth zone. c-plane $Al_2O_3$ and undoped GaN were used as substrates for growth. The characteristics of grown samples were measured from SEM and EDS.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.38-44
• /
• 2015

This review article summarizes the recent progress of quantum dot (QD)-sensitized solar cells based on mesoporous $TiO_2$ thin films. From the intrinsic characteristics of nanoscale inorganic QDs with various compositions, it was possible to construct a variety of 3rd-generation thin film solar cells by solution process. Depending on preparation methods, colloidal QD sensitizers are pre-prepared for later deposition onto the surface of $TiO_2$ or in-situ deposition of QDs from chemical bath is done for direct growth of QD sensitizers over substrates. Recently, colloidal QD sensitizers have shown an overall power conversion efficiency of ~7% by a very precise control of composition while a representative CdS/CdSe from chemical bath deposition have done ~5% with polysulfide electrolytes. In the near future, it is necessary to carry out systematic investigations for developing new hole-conducting materials and controlling interfaces within the cell, thus leading to an enhancement of both open-circuit voltage and fill factor while keeping the current high value of photocurrents from QDs towards more efficient and stable QD-sensitized solar cells.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.255-261
• /
• 2016

$CaCO_3$ was applied in various industries including rubber, plastics, paint, paper, food additives, and acid neutralizer, etc., owing to its excellent physical and chemical characteristics as well as various appearances of crystals and many reserves. In particular, research on controlling the structure and shape of $CaCO_3$ has attracted considerable attention recently, because the whiteness and physical characteristics of $CaCO_3$ depend on the size and shapes of the particles. In this study, $CaCO_3$ was synthesized using $CaCl_2$ and $(NH4)_2CO_3$, which has multi-shapes and structures, using a self-assembly method with a hydrothermal method. The structure and morphology of the $CaCO_3$ could be controlled by adjusting the pH and precursor concentration. In particular, the pH adjustment appeared to be a critical factor for the morphology and crystal form. In addition, the calcite and cubic shape were obtained at pH 7, while the mixed calcite, aragonite structure, and rod shapes appeared at pH 7 and over. Through an analysis of the particle formation process, the formation of the calcium carbonate particles was confirmed. The physicochemical properties of the synthesized $CaCO_3$ were analyzed by SEM, XRD, EDS, FTIR, and TG/DTA.

• Journal of Life Science
• /
• v.8 no.3
• /
• pp.263-271
• /
• 1998

One of the better-characterized transcription factor of E. coli is the cAMP receptor protein(CRP) and the CRP binds cAMP and DNA. The cAMP-CRP complex is involved in regulation of many genes at bacteria. The cAMP-CRP regulatory element represents, in some respects, a global regulatory network. The aim of this work was to study the structure and the mechanisms controlling the expression of CRP in Serratia marcescens. We have been get 5 different clones from Serratia which stimulated the cells to use maltose as a sole carbon source in E. coli TP2139. The crp gene clone, pCKB12, was confirmed by Southern hybridization with E. coli crp gene. The location of the crp gene was determined by construction subclones carrying various portions of pCKB12. To investigate the potential role of CRP in E. coli, lacZ fused plasmids were constructed and investigated the ${\beta}$-galactosidase activity of the fused plasmid. The Serratiamarcescens cAMP receptor protein can substitute the E. coli CRP in transcriptional activation at the lacZ gene. These results suggest that Serratia marcescens cAMP receptor protein complex functions to regulate several promoters in E. coli.

• Journal of Acupuncture Research
• /
• v.21 no.2
• /
• pp.1-20
• /
• 2004

Objective : The aim of this study was to investigate effects of Angelica gigas Nakai(AGN) on the ischemic injury by intraluminal filament insertion in the rats. Methods : The ischemia was induced by intraluminal filament insertion into middle cerebral artery. AGN herbal acupuncture into SP10 was carried out during 3 weeks after ischemic injury. Eight-arm radial maze was designed for the behavioral task. AGN herbal acupuncture showed neuroprotective agents in cresyl violet, acetylcholinesterase(AchE), choline acetyltransferase(ChAT) and nerve growth factor(NGF)-stain. Then check the effect of regional cerebral blood flow(rCBF) according to AGN herbal acupuncture in rats. Results : The errors in the eight-arm radial maze task were significantly decreased in normal group compared with control group on 1~6days, AGN2(0.02g/kg) herbal acupuncture group on 1~5days, AGN3(0.1g/kg) on 1~3days, AGN4(0.5g/kg) on 1, 3~6days. The rate of correct choice was significantly increased in AGN1(0.01g/kg) and AGN4 herbal acupuncture groups. The density of neurons in the hippocampal CA1 was the most increased in normal group and AGN1, AGN3, AGN4 herbal acupuncture groups compared with control group. The density of AchE in the hippocampal CA1 had a tendency to increase in all the groups when they were compared with control group, but not significant. The density of ChAT in the hippocampal CA1 was significantly increased in normal group and AGN1, AGN4 herbal acupuncture groups compared with control group. The density of NGF in the hippocampal CA1 was significantly increased AGN4 herbal acupuncture group compared with control group. The rCBF was significantly increased in AGN1, AGN3 and AGN4 herbal acupuncture groups without the change of blood pressure. Conclusions : These results suggest that AGN herbal acupuncture can be used for controlling stroke in early stage as herbal medication.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.171-176
• /
• 2003

The fate and behavior of polycyclic aromatic hydrocarbons(PAHs) and heavy metals in the environment are mainly controlled by their interactions with various components of soils and sediments. Due to their large surface area and abundance in many soils, smectites may greatly influence the fate and transport of the contaminants. In our experiment, PAH sorption by hexadecyltimethylammonium(HDTMA)-modified smectite linearly increased in proportion to the amount of HDTMA added on the clay. However, trimethylammonium(TMA)-modified smectite did not show superiority in its sorption of PAH compared with the HDTMA-smectite or dodecyltrimethylammonium(DTMA)- smectite. Meanwhile, the smectites modified with the same cationic surfactants adsorbed Cd$^{2＋}$(heavy metal) significantly from water at low surfactant loading level, but the Cd$^{2＋}$ adsorption linearly decreased as the loading of surfactant increased. The result shows that the sorption tendency of organoclays for organic or inorganic contaminants was significantly influenced by the amount and size of the surfactants added on the clay. This reveals that the stabilization and configuration of cationic surfactant formed on the clay interlayer of different sizes may be an important factor in controlling the sorptive capacity of each pollutant in the environment.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.229-236
• /
• 2017

The purpose of this study is to investigate the behavior and characteristics of rubber springs and calculate the compressive stiffness by performing dynamic compression tests of rubber springs. In order to carry out the dynamic compression test of rubber spring, total 9 rubber springs were tailored by calculating the shape factor of L80-D55, L90-D58, and L100-D60, and used for the experiments. Experiments were performed by controlling the compression according to the length of the rubber spring, and the compression was increased in the order of 5%, 10%, 15%, 20% and 25% of the strain. From the experimental results, the force-strain curves were obtained and it was confirmed that strength decrease and strength increase phenomenon occurred as the strain increased. In addition, it was confirmed that the decrease of stiffness and the increase of stiffness were clearly observed according to the size and diameter of the rubber spring, and the effective compression stiffness was estimated using the slope of the force-strain curve. By using the effective compressive stiffness, design values that can be used in actual design were presented.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.37-43
• /
• 1994

Y-Ra-Cu-0 oxide superconductors were fabricated by the sinter-forging method to make the critical current density improve through controlling of microstructure and crystal texture. The grain alignment of oxide superconductor was formed by the sinter-forging process and it's c-axis orientation was parallel to the press direction.The orientation factor of texture increased with sinking temperature and pressure, and also grain alignment was improved by the addition of Ag. As for the sinterforged Y-Ba-Cu-O/Ag sample, the $T_c$(on-set) was not almost varied with the sinter-forging temperature, but $T_c\;^{zero}$ decreased more or less at high sinter-forging temperatures. In addition, it was observed that added-Ag was mainly distributed along the grain boundar~es in the (123) matrix, resulting in the densification of microstructure. From these results, i t was thought that the improvement of $J_c$ over 2000A/$\textrm{cm}^2$ was attributed to the texture, densification of microstructure, and (123) grain growth due to the Ag addition.

• The Korean Journal of Malacology
• /
• v.26 no.4
• /
• pp.267-273
• /
• 2010

From January to December 2007, we have investigated sediment types, environmental factors and density of clam Ruditapes philippinarum inhabited at Oeri, Naeri, Jonghyeon and Bangmiri tidal flats in Gyeonggi Bay off the west coast of Korea. Sediment types of Oeri and Jonghyeon were characterized with well sorted muddy sand. In contrast, Bangmiri tidal flat was mainly composed of poorly sorted gravelly muddy silt and Naeri was characterized with very poorly sorted muddy-sandy gravel. During the course of study, the surface water temperature, salinity, dissolved oxygen and pH ranged 3.2 to $27.0^{\circ}C$, 21.7 to 33.3 ‰, 5.6 to 12.7 mg/l and 7.36 to 8.82, respectively. The suspended solid (SS) ranged from 3.2 to 1,266.0 mg/l and chlorophyll-a level in the water column ranged $0.3-36.1{\mu}g/l$, respectively. The density of clam in the study areas was mainly determined by the harvesting activities rather than the types of substrate. Relatively higher density of clam was observed in Oeri and Bangmiri where the clam seeds were sowed by the villagers. Condition factor of clams were found to be higher in Oeri where the substrate sorting was better with higher level of chlorophyll a. It was believed that sediment types and the level of available food the two governing factors controlling the density and growth of clam in Gyeonggi Bay.