• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.65-65
• /
• 2020

Bakanae disease, caused by Gibberella fujikuroi, is one of the most devastating diseases threatening rice production in Korea. In recent years, the incidence of bakanae disease became alarming due to the mechanical transplanting practice where the spread of bakanae can be amplified during accelerating seeds growth, due to the use of seeding boxes. The development of resistant rice cultivars could be the primary and effective method for controlling bakanae disease. However, the effects of individual resistance genes are relatively small. Therefore, pyramiding of bakane R genes in rice breeding is a promising strategy having a high potential to mitigate the advert effects of bakanae disease. This study employed a gene pyramiding approach to develop bakanae disease resistant rice lines carrying qBK1, qFfR1 introduced from rice line MY299BK and cv. Nampyeong, respectively. The MY299BK carries qBK1 introduced from cv. Shingwang, which was found to have a high resistance compare to Nampyeong. In addition, the pyramiding effect of the qBK1 and qFfR1 resistance genes were investigated, and the presence or absence of these genes helped us investigate their interaction through bioassay method and MAS. Furthermore, the distribution of resistance in the population showed a biased distribution toward resistance in the F6:7 populutions. However, we could not confirm the accumulation effect of the resistance gene, but the difference between the two genes by the SN2 marker was confirmed. Therefore, the qBK1 gene harbored by MY299BK appears to be different from the qFfR1 carried by Nampyeong, suspected to possess a different bakanae disease resistant gene different from those found in MY299BK and Nampyeong.

• Korean Journal of Materials Research
• /
• v.34 no.4
• /
• pp.208-214
• /
• 2024

To fabricate intermetallic nanoparticles with high oxygen reduction reaction activity, a high-temperature heat treatment of 700 to 1,000 ℃ is required. This heat treatment provides energy sufficient to induce an atomic rearrangement inside the alloy nanoparticles, increasing the mobility of particles, making them structurally unstable and causing a sintering phenomenon where they agglomerate together naturally. These problems cannot be avoided using a typical heat treatment process that only controls the gas atmosphere and temperature. In this study, as a strategy to overcome the limitations of the existing heat treatment process for the fabrication of intermetallic nanoparticles, we propose an interesting approach, to design a catalyst material structure for heat treatment rather than the process itself. In particular, we introduce a technology that first creates an intermetallic compound structure through a primary high-temperature heat treatment using random alloy particles coated with a carbon shell, and then establishes catalytic active sites by etching the carbon shell using a secondary heat treatment process. By using a carbon shell as a template, nanoparticles with an intermetallic structure can be kept very small while effectively controlling the catalytically active area, thereby creating an optimal alloy catalyst structure for fuel cells.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.43-48
• /
• 2024

The discovery of a two-dimensional electron gas (2DEG) at the interface of LaAlO₃ (LAO) and SrTiO₃ (STO) substrates has sparked significant interest, providing a foundation for cutting-edge research in electronic devices based on complex oxide heterostructures. However, conventional methods for producing LAO thin films, typically employing techniques like pulsed laser deposition (PLD) within physical vapor deposition (PVD), are associated with high costs and challenges in precisely controlling the La and Al composition within LAO. In this study, we adopted a cost-effective alternative approach-solution-based processing-to fabricate LAO thin films and investigated their electrical properties. By adjusting the concentration of the precursor solution, we varied the thickness of LAO films from 2 to 65 nm and determined the sheet resistance and carrier density for each thickness. After vacuum annealing, the sheet resistance of the conductive channel ranged from 0.015 to 0.020 Ω·s^-1, indicating that electron conduction occurs not only at the LAO/STO interface but also into the STO bulk region, consistent with previous studies. These findings demonstrate the successful formation and control of 2DEG through solution-based processing, offering the potential to reduce process costs and broaden the scope of applications in electronic device manufacturing.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.41-48
• /
• 1995

In former times the protection of our environment didn't play an important role due to the fact that emissions and effluents were not considered as serious impacts. However, opinions and scientific measurements meanwhile confirmed that the impacts are more serious than expected. Thus measures to protect our earth has to be taken into consideration. A part of these measures in the Environmental Impact Assessment (EIA). One of the most important parts of the EIA is the collection of basic datas and the following evaluation. Experience out of the daily business of Gerling Consulting Group shows that the content of the EIA has to be revised and enlarged in certain fields. The historical development demonstrated that in areas in which the population and the industrial activities reached high concentration there is a high necessity to develop strict environmental laws and regulations. Maximum values of the concentration of hazardous materials were fixed concerning the emission into and water. Companies not following these regulations were punished. The total amount of environmental offences increased rapidly during the last decade, at least in Germany. During this development the public consciousness concerning environmental affairs increased as well in the industrialized countries. But it could clearly be seen that the development in the field of environmental protection went into the wrong direction. The technologies to protect the environment became more and more sophisticated and terms as: "state of the art" guided more and more to lower emissions, Filtertechnologies and wastewater treatment for example reached a high technical level-but all these sophisticated technologies has one and the same characteristic: they were end-of-the pipe solutions. A second effect was that this kind of environmental protection costs a lot of money. High investments are necessary to reduce the dust emission by another ppm! Could this be the correct way? In Germany the discussion started that the environmental laws reduce the attractivity to invest or to enlarge existing investments within the country. Other countries seem to be not so strict with controlling the environmental laws which means it's simply cheaper to produce in Portugal or Greece. Everybody however knows that this is not the correct way and does not solve the environmental problems. Meanwhile the general picture changes a little bit and we think it changes into the correct direction "End-of-the-pipe" solutions are still necessary but this word received a real negative touch and nobody wants to be brought into connection with this word received a real negative touch and nobody wants to be brought into connection with this word especially in connection with environmental management and safety. Modern actual environmental management starts in a different way. Thoughts about emissions start in the very beginning of the production, they start with the design of the product and modification of traditional modes of production. Basis of these ideas are detailed analyses of products and processes. Due to the above mentioned facts that the public environmental consciousness changed dramatically a continous environmental improvement of each single production plant has to be guarantied. This question is already an important question of the EIA. But it was never really checked in a wholistic approach. Environmental risks have to be taken into considerations during the execution of an EIA. This means that the environmental risks have to be reduced down to a capable risk-level. Environmental risks have to be considered within the phase of planning, during the operation of a plant and after shut down. The experience shows that most of the environmental relevant accidents were and caused by human fault. Even in highly protected plants the human risk-factor can not be excluded during evaluation of the risk-potential. Thus the approach of an EIA has to regard technical evaluations as well as organizational thoughts and the human factor. An environmental risk is a threat to the environment. An analysis of the risk concerning the organizational and human aspect however never was properly executed during an EIA. A possible solution could be to use an instrument as the actual EMAS (Environmental Management System) of the EC for more accurate evaluation of the impact to the environment during an EIA. Organizations or investors could demonstrate by an approved EMAS or even by showing their installment of EMAS that not only the technical level of the planned investment meets the requested standards but as well the actual or planned management is able to reduce the environmental impact down to a bearable level.

• Journal of Chest Surgery
• /
• v.35 no.7
• /
• pp.542-547
• /
• 2002

Background: Postpneumonectomy empyema(PPE) is an infrequent but potentially life-threatening complication. To date, various surgical efforts have been made to manage this complication. We reviewed our 20-year surgical experience of PPE and long-term follow-up data. Material and Method: Total of 37 patients who were treated for PPE between fan, 1980 and Jun, 2000 were included. Various clinical factors such as micro-organism, operative method and timing, presence of bronchopleural fistula(BPF), underlying disease and fate of empyema cavity were retrospectively reviewed and analyzed. Result: Majority of patients(34) underwent Eloesser operation for effective drainage. There was only one operative mortality. The causative organisms were Staphylococcus species and Pseudomonas species in 46% BPF was found in 20 cases, among which spontaneous closures took place in 4 cases. The chest wall was closed in 40%(8/20) of patients with BPF, compared to 59%(10/17) without BPF. The closure rate was statistically better in patients without BPF(p=0.006). Even though the patients with benign disease showed higher closure rate(50%) than those with lung cancer (31%), the difference was not significant(p=0.25). Conclusion: Eloesser procedure was an effective method for initial drainage of PPE cavity with low operative mortality. Given the findings of low spontaneous closure rate of BPF, aggressive approach to close the BPF is mandatory to achieve the final goal of chest wall closure. It was found that majority of patients still left their chest cavity opened, even after controlling the active inflammation of the empyema cavity. More aggnessive approach for chest wall closure is recommended in all patents with benign disease and in selective patients with lung cancer if there is no evidence of recurrence at several years after the initial operation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1075-1082
• /
• 2016

In order to calculate the optimum installation interval between a speed hump and hump type crosswalk that are installed continuously in succession, this study examined the speed of a vehicle that passes different intervals between speed humps and hump type crosswalks from the approach section of a roundabout having a maximum speed limit of 30km/h; analyzed the effects of speed humps and hump type crosswalks installed continuously in succession on vehicle driving speed; and simulated the optimum installation height of hump type crosswalk. As a result, the following conclusion was drawn. First, it was found that the optimum interval between a speed hump and hump type crosswalk, which are the representative traffic calming techniques for reducing vehicle speed, to control vehicle speed under 30km/h is 30m. Second, as a result of comparing the deceleration of a vehicle that pass hump type crosswalks, it was found that if the installation interval is 65 m and above, a speed hump and hump type crosswalk had no effect. Therefore, it is desirable that the maximum installation interval between a speed hump and hump type crosswalk for controlling vehicle speed within a fixed road section should not exceed 65m. Third, the analysis showed that the optimum installation height of hump type crosswalk is 6-8cm in case vehicle speed at the approach section is 20km/h or lower, 8-10cm in case of 30km/h, and 10cm in case of 30km/h or higher, respectively. Fourth, even at a road section on which a speed hump and hump type crosswalk are installed, speed reduction effects may sometimes be insignificant due to a driver's studying effect, traffic conditions and so on. Thus, it is judged that speed reduction effects will be greater if several traffic calming techniques such as speed hump, chicane, and choker are applied at the same time. Therefore, in case of applying traffic calming techniques for the purpose of reducing vehicle speed in order to promote pedestrian safety, the composite application of several techniques should be considered.

• Journal of the Daesoon Academy of Sciences
• /
• v.28
• /
• pp.103-131
• /
• 2017

As the establishment of self-identity is based on 'Relationships of Mutual Beneficence,' the formation of 'Relationships of Mutual Beneficence' is the only road to the security and confirmation of self-existence. But given that our ordinary life almost entirely consists of actions objectifying others, the formation of 'Relationships of Mutual Beneficence' is by no means easy. The formation of 'Relationships of Mutual Beneficence' should be based on morality, controlling self-desire, and not objectifying others. Philosophy based on a priori reasoning describes self-control over selfdesire as the domination of the body through a priori reasoning. But this practical philosophy cannot present a self-evidential internal motivation behind moral actions. Due to this, the application of moral order given by a priori reasoning in response to reality is likely to be reinterpreted on basis of self-interest. With regards to this, the 'propensity towards sympathy' is given as new moral norm. The 'propensity towards sympathy' as emotion is direct and consistent given that feeling occurs prior to thinking. The 'propensity towards sympathy' is intuitive in the sense that it is an instinctual response preceeding a reasoned judgment. The 'propensity towards sympathy,' as a natural moral emotion, is self-validating given that all human beings know it and practice it. But previous studies on the 'propensity towards sympathy' have an obvious limitation because they adopt phenomenological approaches to the 'propensity towards sympathy' which eschew the investigation of morality. Though they present the 'propensity towards sympathy' as a natural emotion based on body rather than reason, they do not philosophically explain the 'propensity towards sympathy.' Thus the 'propensity towards sympathy' as a natural moral emotion is likely to be interpreted as a subjective and relative moral norm. This paper philosophically explains that the 'propensity towards sympathy' is a universal moral norm on the basis of Merleau-Ponty's 'flesh.' 'Flesh' is formed as the entanglement between oneself and others and presents the 'propensity towards sympathy' as its philosophical basis. In other words, 'flesh' formed as the mixture or entanglement between oneself and others is the material foundation upon which one can activate the 'propensity towards sympathy.' This paper's approach to the 'propensity of sympathy' can be desribed as a phenomenological approach to the 'propensity towards sympathy' as a universal moral norm.

• Economic and Environmental Geology
• /
• v.6 no.1
• /
• pp.29-64
• /
• 1973

A land resources survey in the semi-arid area, Mula in S. E. Spain, of $400km^2$ is compiled. The basic aim of the project is to investigate the intrinsic qualities of the land resources of the area by means of applying an integrated method of natural resources survey mainly concerning with analysis and synthesis of land complexes, each of them represents an area or a group of areas with similar patterns of landforms, soils and vegetation, based on a geomorphological approach. The area is characterized by a linear arrangement of relief pattern with an asymmetric homoclinal repetition of slope attitudes elongating WSW-ENE, dipping steeply on the NW sides and gently on the SE sides, which have been resulted from the post-Alpine folding of the Triassic to Cretaceous limestone, the Eocene limestone, the Oligocene sandstone and the lower Miocene limestone and marl, and the post-lower Miocene faulting, tilting and subsequent differential erosion of the Miocene sedimentary formations. An integrated body of information in geology, landforms, soils and vegetation, which are significantry interrelated as an environmental complex, has been obtained. Using this data, 26 land complexes developing on the various situations of landforms, such as folded mountain ranges, tilted tablelands, bevelled cuestas, degraded hill-lands associating with enormous foots lopes, undulating terrains and terraced or flat plains, have been differentiated, mapped and described. The soils of the area are mostly light colored calcic lithosols which have been derived dominantly from the marly parent materials and developed into remarkable slope catenas in some places depending on the relief conditions. The land uses of the area are mainly characterized by the perennially irrigated cultivation of citrus orchards along the terraced alluvial deposits fringing the Segura and Mula River, and the dry-land cereal cultivation on gentler slopes. Pioneer dry-land cultivations within the shrubs on steeper slopes are restricted to the unchannelled tributary drainage floors. The availability of water is a fundamental controlling factor for existence of native and cultivated vegetation as a whole, and a number of active processes including sheet wash and gully erosion, especially on the scarp slopes, are the other important factors to be considered in conservation and management of the land in the area.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.8-9
• /
• 2017

Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.3
• /
• pp.293-299
• /
• 2001

Background : Sustained-release theophylline, which is generally prescribed as a twice-daily equal-dose regimen, is one of the more common asthma treatments. The development of a sustained-release drug delivery technology that enables improved control of the theophylline blood levels represents a significant advancement in both the efficacy and safety of dosing. Method : A crossover study was conducted with 25 adult chronic asthmatic patients requiring daily bronchodilator therapy. The study group included thirteen males and twelve females with ages ranging from 19 to 71 years. The overall approach was to place the patients first on the twice-daily preparation($Etheophyl^{(R)}$) for 28 days at 8 AM and 8 PM, and measure the pulmonary function and theophylline level on the 28th day. The patients were subsequently switched to the once-daily preparation($Uniphyl^{(R)}$) in the same daily dose at 8 PM on the 29th day and the same parameters were measured on the 56th day. Results : The mean serum levels of theophylline were $8.18{\pm}1.66\;{\mu}g/ml$ in the $Etheophyl^{(R)}$-treated period and $8.00{\pm}1.75\;{\mu}g/ml$ in the $Uniphyl^{(R)}$-treated period. ln addition, the $FEV_1$ showed $71.40{\pm}7.48$ percent in the $Etheophyl^{(R)}$-treated and $69.18{\pm}9.00$ percent in the $Uniphyl^{(R)}$-treated period. Thus there were no significant differences between the once-daily and twice-daily preparation. Conclusion : The results indicated little clinical differences between the two medications. The two drugs are equally effective in controlling asthma over the four weeks of treatment.